

    RUNNING THIS DISK

    1)  You can either change to the Floppy Drive it is
        in and start the Program Name listed on the
        Label or better still copy it to your hard disk.

    2)  Create a new directory on your Hard Disk (best to
        use the name of the Program on the Label) change
        to that directory, copy all the files from the
        Floppy into the Hard Disk directory and start the
        Program there.  The reason for going to all this
        effort is simply it will run several times faster
        after it is on the Hard Disk.

        For example;  If the Program name on the label were
        INFINITY you would

        C:  <return>     Change to Drive C: from wherever you are.
        CD\ <return>     Change to the Root Directory
        MD INFINITY <return>      Make a Directory  INFINITY
        CD\INFINITY <return>      Change to that Directory
        COPY A:*.* or B:*.*  <return>  Copy all files on Drive A or B
                                       into the C:\INFINITY Directory
        INFINITY <return>       to start the program



    EQUIPMENT  Requirements;

       IBM PC-XT-AT-386 or clone, with a hard drive and at least
       350kb of memory, using MS-DOS 3.x or above.



    PROBLEMS

       If you cannot load this disk successfully please contact
       the Company or Organization that sent it to you.  Their
       Name is usually found on the Label.

       It is necessary to have a path to your \DOS Directory (Usually
       on drive C ie.  C:\DOS) and a copy of your COMMAND.COM file
       should be in the \DOS Directory, which it normally is.
       You can find out what your Path's are by typing  PATH <return>
       from the DOS prompt.
       You can change the Path's by editing your AUTOEXEC.BAT file
       found in your Root Directory of Drive C: (or Drive D: if you
       are using Stacker).
       You can verify  COMMAND.COM is in C:\DOS by typing
       C: <return>
       CD\DOS <return>
       DIR COMMAND.COM



    FILES REQUIRED

       README         What you are reading now.

        ???????.exe   Program to view that data on the Disk.

        ???????.dbf   File that holds all menu structure.

       SCREENS.dbf & .dbt  Various screens of information.

       Various  .TXT files of Information which the Program
                will read in.

       NEW.FIL  Tells Program the name of the Menu .dbf file.

    DESCRIPTION OF SELLDISK SYSTEM


     What you are using is Part 2 of a 2 Part Program.  Part 1,
     The SELLDISK Program allows the purchaser to easily create
     a sales/demo/product description disk (Part 2) for selling
     or describing or instruction for any product or service to
     any audience that has a computer.

     No Programming required.  If you were able to start this program,
     you will be able to enter the information on Part 1 which will
     create your own personal Sales/Demo disk for your own products
     or services.

     Part 1 allows you to use up to 5 menus with 6 options on each.
     Each option can either call one of the 5 menus or list a text
     file you have created, "similar to what you have before you now".

     Best of all you can order your own, registered copy of the SELLDISK
     System for only $35 plus $5 shipping/insurance by mailing or faxing
     the order form on this menu.



    COPYRIGHT


       Copyright 1992

       This Program is fully protected under the Copyright Laws of
       the U.S.  by   KLM Publishing Co.    Author  Earl May
       Box 466  Merrifield, VA 22116     (703) 273-5081 fax




                             - end -





