	




		  Windows NetConn.EXE For Novell Networks v2x,v3x &v4.x 
		 -------------------------------------------------------








				   Brain Software.
		
				  Copyright 1992-95
				 All Rights Reserved

				   

				Beta Version 0.6b 1995
	
			  
				Voice: (44) 116 268 0090
				FAX:   (44) 116 268 0090
	

	
			  













					 

	



	THIS IS NOT FREE SOFTWARE!  
	---------------------------
	
	If this is a BETA copy you are granted a 30 day site licence, for 
	a longer site licence as a BETA site you should register as a BETA
	user (This will not cost anything). If you require a standard 
	licence to use this software please complete the form below. 







				 About NetConn
				---------------
		
		
		


		
		If you have ever printed under Windows to Novell you will
	already have found that from time to time you waste an awful lot 
	of paper. This normally happens when a printer is captured using 
	the wrong windows driver. 


		Well here is the answer... NetConn gathers names of all
	the network queues and windows printer drivers, and allows you to 
	Link one another together. Once the links have been created you 
	only need to select the printer from NetConn and the Queue will
	automatically be captured. Link settings can be saved and you can 
	even set NetConn to restore the default printer driver to the 
	correct queue at start-up.
		
			  


   Updates...
	   

	10-10-1995  v0.3b   First General Release On CompuServe
	26-10-1995  v0.4b   Missing MSIFNX.DLL and new drive scan routines
	10-11-1995  v0.5b   Corrected printer selection & serial Nos
	12-12-1995  v0.6b   Corrected order of printers against queues


   Known Problems...

	MSIFNX.DLL must be located in your system directory





   Thanks To... 
	
	Milo McDowell        for...  Selection by printer Queue ideas



	Any New ideas please mail us ......

	Derek Beacroft or Russell carvell.
	Brain Software
	2 Lyle Close
	Rushey Mead
	Leicester
	England
	LE4 7SA

	CompuServe Mail Box Id: [100327,1161] 












	DISCLAIMER
	-----------

	All warranties are disclaimed, including damage to hardware and/or 
	software from use of this product. In no event will I be liable   
	to you for any damages, including lost profits, lost savings or   
	other incidental or consequential damages arising out of your use  
	or inability to use the program, or any other claim by any other 
	party.


			   Installation.
			  ---------------




	
	Manual Installation .... 
	
	1 ...  Designate a particular server for shred access to NetConn.
	2 ...  All users who will be using NetConn must have access to..
		 SYS:MAIL [ C ]      Create
		 SYS:PUBLIC [ R F ]  Read & filescan
	3 ...  Copy the following files to SYS:PUBLIC (or use installation 
		 routine)
		 NetConn.EXE   (can be installed locally if required)       
		 NetConn.HLP   (can be installed locally if required)       
		 NOVELL.INI    (if this allready exists ignore it)
	4 ...  Flag the files Shareable ReadOnly (SRO)
		 FLAG NetConn.EXE S RO
		 FLAG NetConn.HLP S RO
		 FLAG NOVELL.INI S RO
	5 ...  The Windows DLL files must be copied to your \WINDOWS 
		   \SYSTEM directory. If newer files are in the same  
		   location do not copy these over the top. NetConn will 
		   use the newer files instead. 
	6 ...  Start Windows & create a new icon for NetConn
	7 ...  Start the application

									

				
  			     Instructions        
			    --------------

		To start the NetConn double click on your assigned icon
	from Windows program manager. NetConn will check you are logged in
	to a Novell file server and collect all Driver & queue Information.
	The options bellow are available from the NetConn menu bar.

	
			      Options Menu
			     --------------

	Configure:       
		This will open the window to show existing Novell print
		queues, select a queue and a printer then click connect.
		This will create a link between Queue & Printer to remove
		the link click disconnect an the printer is returned to local 
		mode.
		
	No Network Warning:   
		If sometimes you do not login to your network and NetConn is
		in the start-up group an error is usually generated. The error
		can be switched off and NetConn will terminate automatically.

	Restore Default Printer:
		When NetConn is started you can restore the capture setting 
		for the current printer driver.
		(Assuming you had created a printer link to a network queue)

	Save Settings:
		Saves all the printer links when you exit the application.

	Stay On Top:
		Forces NetConnect Icon to float over any application in its way.





	NetConn TERMS AND CONDITIONS
	----------------------------
	
	NetConn is copyrighted software, and all rights are reserved.  
	NetConn may not be changed or modified in any way except by 
	the author. NetConn Beta is SHAREWARE and may be freely distributed, 
	as long as it remains in its complete form with all support,  
	documentation, and configuration files. It may be used for a 
	thirty day free trial period. Regardless of how the copy is
	obtained, it is requested that all users comply with the
	following licensing / registration provisions if they  
	continue to use it after the thirty day trial period: 
	

	1. Registration is 80.00 per copy per network server. I need  
	   your name and address for registration, and you are entitled 
	   to:

	a. Use all Minor updates at no cost (except shipping and handling; 
	   see below) provided the registration fee hasn't changed. 
	b. Technical support either by phone (you call me) or by letter.


	2.  Clubs, schools, universities and other non-profit organisations 
		may licence NetConn for 35.00 per copy. All users would be 
		registered collectively under your name. Update requests and 
		technical support would be through you, since I don't know the  
		names of the individual users, and would be distributed by you  
		to the users.


	NetConn if distributed must contain all documentation (TXT & HLP 
	files). Archived form is OK to meet this requirement, since it 
	minimises disk space, if you supply the un-archiving program.
  
	A user may install NetConn on a Server, provided He/She registers 
	after the thirty day period if it is still being used.  

	Please use the enclosed registration/order form since it allows me 
	to keep better records and keep up !



	UPGRADES FROM PREVIOUS PROGRAMS AND UPDATES
	--------------------------------------------

	You may use all Minor version updates with the same registration 
	fee, with no extra charge once you have registered NetConn. If you 
	are already a registered site you may upgrade to new Versions of 
	NetConn for an additional 20.00 unless otherwise notified. 

	"BETA Site's Are Excluded from this Upgrade Option"
		   

	   
			   O R D E R   F O R M
			  ---------------------



			     Name  ______________________________________
 
			  Company  ______________________________________

			   Street  ______________________________________

		   City, Postcode  ______________________________________

				   ______________________________________

	 
	Registration Fee for Single-
	Server licence                80.00 ................___________

	Special Registration Fee 
	For non-profit Organisations  
	"Please enclose your details" 35.00 ................___________
				   


	Upgrade to newer version      20.00 ................___________



	"Invoice will follow"     VAT @17.5% ................___________              





	TOTAL................................................___________

	 
	Please indicate payment method:

	 
	Purchase Order ___  Cheque/Postal Order ___  
	Please make payable to BS Systems


	Signature_________________________________      Date ___________

	We normally ship 3.5" 1.44Mb diskettes. Mark here if you
	need Software on different media   ...................  ________




	Where did you learn of This Software ? _________________________

	Details on other Netware Utilities         Yes / No
