
        *****************************************************************
        *            Readme for FUSUP3.EXE (and BWORKS.EXE)             *
        *                                                               *
        *                       May 17, 1994                            *
        *****************************************************************


    Description:
    ------------

    BWORKS.EXE contains updated NLMs, DLLs, and EXEs for BrightWorks v1.0.1, 
    LAN Inventory 3.1.1 and SiteMeter v4.1.1.  (Please note that the NLMs and 
    SMRAGENT.EXE included here are the same versions of those files that are 
    contained within SMRUP3.EXE of PCVEND LIB3).  The updated version of 
    SMRAGENT.EXE included here addresses an "out of memory" message that could 
    display in Windows.  Also included in BWORKSUP.EXE are updated Data 
    Dictionaries (DDFs).  These DDFs now combine Inventory and Metering data 
    structures into the same group of definition files.  In addition, an update 
    to the canned Metering report "Application Use with User Detail" (US_AD.RPT), 
    addresses an issue wherein the Date could appear in the Time Out field.


    File Information:
    -----------------

    FUSUP3.EXE contains the following files:
    ----------------------------------------

    READ1ST .TXT    This document
    BWORKS.EXE    A self-extracting ZIP file that contains the updated 
                    SiteMeter v4.1.1 files.


    BWORKS.EXE contains the following files:
    ------------------------------------------
    
    DPRODREG.EXE     77,437   03-18-94   12:10p  ;used for serialization only
    FIELD   .DDF     55,296   04-28-94   11:27a
    FILE    .DDF      7,680   04-28-94   11:27a         
    FUSION  .EXE  1,175,568   05-09-94    5:54p
    FUSION  .CFG         55   11-15-93    7:05p  ;used for serialization only
    INDEX   .DDF     11,776   04-28-94   11:27a
    NWCALLS .DLL    146,544   11-02-93    2:30p
    NWIPXSPX.DLL     38,544   11-02-93    5:47p
    NWLOCALE.DLL     38,576   11-02-93    6:12p
    NWNET   .DLL    205,104   11-02-93    5:12p
    NWNETAPI.DLL    106,884   01-07-93    1:31p
    SERIAL  .BAT         32   03-17-94    4:33p  ;used for serialization only
    SITEMETR.NLM    351,108   05-04-94   12:12p
    SMRAGENT.EXE     21,168   04-01-94    1:26p  
    SMRPROXY.NLM     74,972   05-04-94   12:18p
    US_AD   .RPT     17,008   03-22-94    4:57p
    VENDOR  .LIS      1,745   03-31-93   11:36a
    UFLBWRKS.DLL     32,640   05-03-94   05:03p
    CHISHWSV.RPT     25,951   05-04-94   02:51p 
    CHISHWMC.RPT     23,809   05-04-94   03:03p 
    CHISHWPC.RPT     25,423   05-04-94   11:05a
    UPF     .RPT      9,562   03-22-94   04:39a
    US      .RPT     14,949   03-22-94   04:44p
    US_AS   .RPT     15,853   03-24-94   04:05p
    SPA     .RPT      7,942   03-22-94   04:35p
    SWINAPP .EXE     49,680   05-04-94   12:06p
    SREPORT .EXE    116,752   05-09-94   05:30p 
    SYSMOD  .EXE     44,192   05-04-94   12:08p
    USAGE   .EXE    130,064   05-04-94   01:44p
    SDUPDATE.EXE    136,736   05-04-94   11:55p
    SA_EQUIP.EXE    272,421   05-02-94   04:35p
    WSDUPD  .EXE     21,504   05-04-94   12:03p
    EQUIP   .EXE    174,607   05-02-94   04:17p 
    CRW     .EXE  1,768,448   05-04-94   04:56p
    QUICKST .WRI     17,536   05-09-94   10:37a ;a guide to getting started  
    DELID   .EXE     16,318   05-04-94   11:35a 
    SPF     .RPT      9,622   03-22-94   04:38p
    AS_UD   .RPT     18,218   03-22-94   03:36p
    AS      .RPT     14,318   03-22-94   03:38p
    AS_US   .RPT     16,592   03-22-94   04:13p
    WSREPOT .RPT     26,961   04-22-94   04:51p
    METERDEF.RPT      7,416   03-23-94   05:03p
    BDIABOUT.DLL    424,464   05-11-94   12:34p 
    SMRXPORT.DLL     67,628   04-17-94   04:46p 
    README  .TXT     36,144   05-13-94   01:37p ;updated with the new changes
    BWORKS  .BAT        158   05-17-94   02:26p ;to remove old files

    Instructions:
    -------------

    (1) Unzip BWORKS.EXE (preferably into a directory OTHER than your 
    current Fusion, or LAN Inventory or SiteMeter 4.10 directory) and 
    copy its' files to the following locations:


                To SYS:SYSTEM\

                    SMRPROXY.NLM
                    SITEMETR.NLM

                To SYS:PUBLIC\

                    SMRAGENT.EXE

                To your FUSION, LAN Inventory or SiteMeter 4.10 directory 
                (where your currently installed copy of Fusion or LAN Inventory 
                or SiteMeter resides): ALL OF THE OTHER FILES
                    


    (2) PLEASE NOTE:    Before the updated FUSION.EXE or WLAI.EXE or  
    SITEMETR.EXE can be executed, it must be serialized.  Listed below 
    (as "a" and "b") are two ways that the .EXE can be serialized.  
    Recommendation:  option (a) is the least time consuming.

        (a) From a DOS prompt (or from a DOS box in Windows), change to your 
        FUSION or LAN Inventory or SiteMeter 4.10 directory and run SERIAL.BAT.  
        Answer the prompts for the last seven digits of your Fusion, or LAN Inventory 
        or SiteMeter 4.10 serial number (found on your original Fusion, LAN Inventory 
        or SiteMeter 4.10 diskettes) and your company name.  The company name must be 
        a minimum of 8 characters and a maximum of 21 characters.

        Once process (a) is complete, the .EXE has been initialized and 
        is ready to be executed.


        (b) Your updated EXE can also be serialized by running a 
        Fusion "Custom" install from your original Fusion or LAN Inventory 
        or SiteMeter 4.10 diskettes.  Follow the outlined steps below, or refer to Page 2-11 
        of your Fusion manual ("Custom Install"):

            (1) You will only need Disk 1 of your original diskettes.  
            Place Disk 1 in the appropriate floppy drive of your PC.

            (2) Load Windows in Enhanced Mode.  From Program Manager, do a 
            File/Run on:  <floppy drive>:\setup.exe.

            (3) You may get a prompt regarding an Install Log File.  
            Overwrite the existing Log File if you wish, or create a new 
            one ... it's your choice.  You'll next get an informational 
            dialog box that makes reference to MAP ROOTs and the need to 
            have a drive mapped to the SYS: volume of the target fileserver.

            (4) Next, the "Choose Server" dialog will appear.  Choose the 
            fileserver that your existing copy of Fusion, LAN Inventory or 
            SiteMeter 4.10 (and, therefore, your updated EXECUTABLE file) 
            resides on.

            (5) The "Install Options" dialog will then appear.  Choose 
            the "Custom" install.

            (6) In the subsequent Install Options dialog, enable ONLY the 
            "Install License on Server" option (i.e., remove the "X" from 
            all boxes but the "Install License on Server" box).  Note:  the 
            "Install License on Server" option will both re-install the 
            Fusion or LAN Inventory or SiteMeter 4.10 license on the target 
            fileserver and serialize the executable (FUSION.EXE, WLAI.EXE or
            SITEMETR.EXE).

            (7) Reply to the prompts for the last seven digits of your 
            product serial number and your password (both 
            can be found on your original diskettes).  You will most likely 
            get an informational dialog that states that a license already 
            exists on the target fileserver, the install will continue normally 
            if you click on "OK".

            (8) The "Enter Pathname" dialog will appear.  This dialog begins 
            the process that will actually serialize the Fusion executable.  
            Provide the path to your existing copy of Fusion or LAN Inventory or 
            SiteMeter 4.10 (and, therefore, the location of your updated 
            EXECUTABLE file).

            (9)  In the "Enter Company Name" dialog box, enter your company 
            name.  The company name must be a minimum of 1 character and a 
            maximum of 20 characters.  Once you have entered the company 
            name, Install will take that information and use it to serialize 
            your updated EXECUTABLE.
                    2
        Once process (b) is complete, the EXECUTABLE has been initialized and 
        is ready to be executed.


    (3) Some additional instructions regarding the NLMs:

    After the new NLMs have been copied to your SYS:SYSTEM directory, in 
    order for the new NLMs to take effect, the existing SiteMeter NLMs need 
    to be UNLOADed first, then the new NLMs LOADed.  To unload the existing 
    NLMs, execute the folowing commands (in the following order) at the 
    fileserver console: 

                unload smrproxy 
                unload sitemetr

    Then load the new NLMs in the reverse order:

                load sitemetr
                load smrproxy

    (4) If you are upgrading Sitemeter or LAN Inventory you will need to make
    a change to the ICON properties to reflect the proper executable. (i.e.
    Sitemeter's exe is NOW SITEMETR.exe, NOT FUSION.EXE and LAN Inventory's
    exe is NOW WLAI.EXE.)

    (5) One more batch file will need to be run.  If you are upgrading to
    BrightWorks v1.0.1 run BWORKS.BAT
    
    This batch file will delete files that are no longer needed.
    
    ---------------
    1Apr94
    TS
    
