
                          HISTORY FILE FOR DOORFRAME
                          ==========================

Version 2.7
-----------
  Added a new variable - Hi.Ascii% which allows you to accept ASCII values
 from 128 to 255. This was added at the request of one of our European users
 since some languages need to use those characters.  Hi.Ascii% = 1 will enable
 this option. The default is zero (disabled).

Version 2.6
-----------
(02-23-92)
  One more time on the SEND routine! I was checking the first few characters
 of a file for the CHR$(27) and if found just assumed that the file was all
 ANSI. Not so! Seems there are 'hand-made' files out there that have the
 color codes at the beginning of a line but no where else. So...... redid it
 one more time (hopefully the last!).

(02-21-92)
  Optimized the code a bit and moved some routines from the main module to
 the library.  Tested with just a two-line program and the size of the .EXE
 went from 103,434 before optimizing to 81,310 after optimizing.  So that
 should cut down on your file sizes a bit!

(02-17-92)
  NOTE: The parameters for the SEND routine have changed with this version!
 The new syntax is SEND FileName$, YN%, Clr%  where Clr% is 0 (home cursor,
 do not clear screen) or 1 (yes, clear screen).
  Added a bunch more routines for programmer use. See the enclosed
 PBC-SUBS.DOC for those.

Version 2.5
-----------
(02-14-92)
  Added a new routine, ClrEOL. This one will clear to the end of the line.
 You can specify where to start clearing. Example:  ClrEOL 10, 10, 1
 will do it's thing on row 10 and clear from column 10 to the end of the line
 and color it blue. The parameters are Xpos, Ypos, Color. Enjoy!
  Fixed a stupid mistake in the SEND routine. I open CONS: for printing to
 the local screen and misspelled it CON! Funny thing is, it worked except 
 when accessing across a network!
  Added GetDView which returns the version of DESQview loaded or zeroes if
 DESQview is not loaded.

(02-10-92)
  Think I finally got that pesky bug in the SEND routine when sending ANSI
 screens fixed! Give it a workout and let me know if it screws up.
  One quirk I found when using The Draw was when I saved the screen with
 ALT-S it didn't transmit quite right. But when the same screen was saved
 using ALT-B, the screen transmitted perfectly. So I would suggest using
 ALT-B instead of ALT-S to save your ANSI screens.

(02-09-92)
  Had some reports of the Backspace locking systems in local mode. Did some
 checking in the routine and the only thing I could find that could possibly
 be the culprit was an IF NOT LocalUsr% statement. Since I have had some 
 problems with NOT in the past, I changed that statement to IF LocalUsr% = 0.
 Since I have been unable to duplicate the lockups on either of my systems,
 I will have to depend on those who have to try this version and see if it
 is fixed. Thanks in advance to those who respond!
  BTW, new BBS number and address with this version.

Version 2.4
-----------
(10-25-91)
  Changed the second parameter on the IN.PUT routine from an integer to a
 single precision number. This allows you to specify a waiting time of less
 than 1 second. The minimum wait is now 1/18th of a second (.005 works
 pretty well).

(10-05-91)
  Fixed an oversight in writing the Wildcat! 3.x USERINFO.DAT. Line 16
 (DoorLogoff$) will now show "Y" if the caller logged off from the Door.

(09-08-91)
  You may now use the ARROW keys. DoorFrame now has an alternate set of keys
 for the Level and Time adjustments. To switch these keys from the ARROW keys
 to the alternate, use SysopKeys% = 1 AFTER you call INITIALIZE. When you
 have SysopKeys% set to 1, PgUp = add time, PgDn = subtract time, INSert =
 add level, and DELete = subtract level. SysopKeys% defaults to 0 so doors
 compiled with previous versions of DoorFrame will work as before.
  When SysopKeys% = 1 pressing one of the arrow keys will return the
 following in RESPONSE$:
    Up Arrow    - RESPONSE$ = "UP"
    Dn Arrow    - RESPONSE$ = "DOWN"
    Left Arrow  - RESPONSE$ = "LEFT"
    Right Arrow - RESPONSE$ = "RIGHT"

(09-06-91)
  Would you believe I left out the code for low-intensity white in the
 DIS.PLAY routine! It has been added. (Thanks to Jerry Claxton for finding
 that one!)
  Added the ability to use low intensity colors when using the symbols in
 the DIS.PLAY routine. To make a color low intensity just put a * in front
 of the first symbol. Ex: *}text} displays 'text' in low intensity white.

(08-30-91)
  Changed the EXIT.DOOR "G" routine to allow logoffs on all systems, not just
 PCBoard.
  Changed the WildCat! 3.0 routines so that it DOES NOT automatically write
 the USERINFO.DAT file. If you wish to write this file, set User.Info = 1
 before calling EXIT.DOOR.

Version 2.3 
-----------
(06-20-91)
  Added support for WildCat! v3.0. This version of WildCat! no longer uses the
 CALLINFO.BBS file. It now uses the 31-line version of DOOR.SYS and creates an
 additional file called USERINFO.DAT. 

(7-07-91)
  They finally woke up at Mustang! Software and are now using the standard
 52-line DOOR.SYS like everyone else. This release adjusts for that. Just put
 the path to USERINFO.DAT on line 1 of the .CFG file (instead of DOOR.SYS).
 Make sure that DOOR.SYS is in the same directory as USERINFO.DAT!

Version 2.2
-----------
(03-31-91)
  Added support for non-standard IRQ numbers (other than IRQ3/IRQ4). See the
 docs for info on how to implement this.

Version 2.1 (03-23-91)
----------------------
  Modified the LINES routine. Now if you draw intersecting vertical and
 horizontal lines, the appropriate character will be inserted where the
 lines cross. For example, at the intersection of two double lines the
 character  would be printed.
  Tweaked the MORE routine a little. It was doing a CR/LF after the prompt
 so it wasn't getting erased because it was on the line above!
  Also put in logic in the MORE and ENTER routines to restore the cursor to
 it's position before the call.
  Fixed a problem in DORINFOx.DEF where the Sysop names where being taken
 from DORINFO instead of the configuration file. Also allowed for the fact
 that the RBBS DORINFO has 13 lines instead of 12.
  Still didn't have the DORINFOx.DEF quite right for RBBS. Hopefully it will
 work as it should now (helps when you use the correct LINE INPUT statement).
  One more time on DORINFO to fix the BBSSYS$. Also fixed a problem in
 picking up the correct node number.

Version 2.0 (02-02-91)
----------------------
  Fixed a problem with the backspace when the cursor was in columns 79 or
 80 (it wouldn't).
  Enlarged the PRINT USING in the High Score Bulletin. It will now handle
 scores up to 9,999,999,999.
  Made DoorFrames internal error trapping available for those of you who
 wish to utilize it instead of writing your own. All Basic errors are
 trapped and will be written to DFRAME.ERR upon exiting the door.
  Added support for WWIV's CHAIN.TXT file. DoorFrame both reads and writes
 this file. It is untested as of this writing so watch it!
  Added 2 more parameters to the IN.PUT routine. These are INTEGERS and
 indicate the foreground and background colors for the input.
  Updated the CALLINFO.BBS routine to read the newer 36 line format. It
 will still handle the old 30 line format ok.
  Added a parameter to the SHOW.BLT routine. This is a STRING and is
 either "Y" or "N". The "Y" tells the routine to display the "Do you want
 to see the Bulletin" prompt while "N" will bypass the prompt. If you have
 an option on your door menu to view the bulletin, you would use "N" (why
 ask them again!).

Version 1.9 (12-31-90)
----------------------
  Fixed a bug when using the `, @, {, ^ etc. symbols. If one of these
 symbols was entered at an IN.PUT prompt, the program would go bananas.
  I had inadvertantly left out the ENTER prompt at the end of the SEND
 routine so when someone brought it to my attention I belated added it.
 Now I find that is the way some of you want it! So in order to satisfy
 both camps, I have added a parameter to SEND. The syntax is now:
   SEND (MSG$, YN%)   where YN% is an INTEGER. 0 = don't send the ENTER
 prompt at the end, 1 = yes, use it. 
  Added support for Spitfire's SFDOORS.DAT. DoorFrame both reads and writes
 to this file.
  Added the ability to log off from within the Door. However, this option is
 for PCBoard systems only!
  Added MAKE.BLT.CURRENT routine which posts current scores instead of the
 highest scores attained.
  Fixed a bug in the MAKE.BLT routines. It didn't take kindly to an extension
 being included in the Bulletin filename!

                         AND THAT'S IT FOR THIS YEAR!!

Version 1.8 (12-16-90)
----------------------
  Added a few more subroutines for programmer convenience. These routines
 will add some capabilities not found in QuickBasic. Routines added are:
   DelFile, DrvSpace, GetDrv, GetExecPath, GetKbd, GetSub, NameCase,
   RInstr, SetError, SetKbd and SubExist.
  Fixed a problem with the ALLOWEDBYTES# variable (helps if you add it to
 the DFRAME.INC file!).

Version 1.7 (12-13-90)
----------------------
  Added support for PCBoard 14.5's USERS.SYS file! Since the bug reports
 had started slacking off, thought I would introduce a few more 8-).
  Added option for no border (spaces) in the BOX.IT routine.
  Forgot to add an ENTER prompt after the last page in the SEND routine. 
 Fixed now.
  Had some reports of Security Levels higher than 32,767 so the LEVEL
 variable has been changed from an INTEGER (%) to a LONG (&).
  Took the Time Left warnings out. They only messed up the screen! So if 
 you want to warn the caller when time gets low, you should check the
 TIMELEFT% variable and display a message accordingly. 

Version 1.6 (12-11-90)
----------------------
  Fixed a problem in the error handling routines. It will hopefully handle
 errors better now and exit gracefully.
  Fixed the 'keyboard timeout' problem when coming out of Chat mode.
  Fixed another Chat mode problem where the lines on the remote screen
 would overwrite when it reached line 23.
  Optimized the library a bit. Cut about 13K off the size of the .LIB.
  Added a check for DOS version. If the DOS version is less than 3.0 it
 will display an error message and exit (DOS 3.0+ is required because the
 files are opened in SHARED mode).

Version 1.5 (11-30-90)
----------------------
  Finally got the midnight time problem fixed where the caller would get a
 time expired message if he had logged on the BBS before midnight and 
 entered the door after midnight.
  Fixed an error when using DORINFOx.DEF. It worked fine as long as
 DORINFOx.DEF was the only thing there but went screwy if you threw a path
 at it.
  When I added the options for color in the middle of a line of text, I
 inadvertantly disabled the full-line blink. Now fixed.

Version 1.4 (11-25-90)
----------------------
  Added some enhancements to the DIS.PLAY routine. By using special symbols,
 selected text can be displayed in different colors (like BLUE, YELLOW, BLUE)
 without having to use 3 DIS.PLAY statements. See the DOCS and DISPLAY.BAS
 for a complete explanation.
  Added the MODE% variable. Previously if you used DETECT.ANSI, the caller
 would be switched to COLOR MODE automatically. With the MODE% variable, the
 color will be on or off depending on the caller's BBS setting.
  Modified the IN.PUT routine somewhat. It now requires 2 parameters to be
 passed. The first parameter is the desired length of the input and the 
 second is the length of time to wait for that input.

Version 1.3 (11-20-90)
----------------------
  Added a time limit option to the IN.PUT routine. See EXINPUT.BAS for
 and example on using it.
  Fixed an 'oversight' in the OUT.PUT routine. Completely left out updating
 the column position!
  Made a correction in the centering routine. Now when you use centering
 with a colored background, you don't get the colored line all the way
 across the screen! Also, if you do an IN.PUT after a center it will be
 properly positioned after the prompt instead of on the right edge.

Version 1.2 (11-17-90)
----------------------
  Made the Keyboard Timeout configurable by the programmer. Before calling
 INITIALIZE, populate TIMEOUT% with the number of seconds you want for
 input. If you do not specify a TIMEOUT%, it will default to 5 minutes.
 The minimum is 60 secs so anything less than that will be the default.
  Added support for DORINFOx.DEF which now gives us QBBS, RBBS, and
 Remote Access! (Note: This needs to be tested more. Any volunteers?)

Version 1.1 (11-12-90)
----------------------
  Fixed a problem with the cursor positioning routines when the local display
 was toggled off (it didn't work!).
  Changed the BOX subroutine to BOX.IT to avoid a naming conflict with other
 add-on packages for QB 4.5. (Crescent Software's for one).
  Added support for CALLINFO.BBS so your doors will now run on Wildcat! 
 systems without a converter!

Version 1.0 (11-1-90)
---------------------
Initialize release.


