RADIO SHACK 17-1006/20/51/76/77 - CT102/302/1030/1033 NOTES: These are dual NAM units. The ESN prefix is 165 decimal & A5 hex. Radio Shack: 817-390-3244 NAM PROGRAMING: 1. Turn power on. 2. Enter * 3 0 0 1 # S S S S S SEL 9 END where SSSSS is the security code 1 2 3 4 5 is the factory default. 3. If the above was succesfull the phone will display "IdEnt IF InFO Pri" Skip to step 6 to program NAM 1, or complete steps 4 & 5 to switch to NAM 2. 4. Press SND and the phone will display "OPt InFO diSAbLEd" 5. Press SND and the phone will display "OPt InFO EnAbLEd" 6. Press END, the first data entry will be displayed. 7. The SND key toggles single digit options. 7. The END to stores and increments each step. 8. Press SEL CLR to exit programing having entered all steps. PROGRAMING DATA STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 01 00000 - 32767 HO-Id SYSTEM ID 02 0 OR 1 MIN Mark MIN MARK 03 0 OR 1 LOCL OPt LOCAL USE MARK 04 10 DIGITS Phonxx MIN (AREA CODE & TEL#) 05 08 ONLY St CLASS STATION CLASS MARK 06 333 OR 334 PAging Ch INITIAL PAGING CHANNEL 07 2 DIGITS O-LOAd CLASS ACCESS OVERLOAD CLASS 08 A OR B PrEF SyS PREFERRED SYSTEM (SND TOGGLES) 09 2 DIGITS grOUP Id GROUP ID (10 IN USA) 10 5 DIGITS SECUrity SECURITY CODE 11 MM/DD/YY 1 dAtE CAN NOT BE CHANGED 12 MM/DD/YY 2 dAtE INSTALLATION DATE 13 Prog done PRESS SEL CLR TO EXIT, ON CT 302 YOU MUST TURN POWER OFF & ON.