1

     SYSEDIT : SYSEDIT (no parameters)

     The SYSEDIT Feature on the FEDBBS isn't the Same as TRIPEDit the Stand
     alone program that started the FEDBBS , but it has alot of things to
     help you out in managing User Profiles , TripLinKs Current Set Up,
     along with a few Odds and Ends. As Time Goes on I will be Adding
     more options to this Menu. For more advanced Options / Tools use the
     TRIPEDIT.PRG Supplied with this Program, please look at it closely
     because there are alot of choices within it. Two very important options
     from the TRIPEDIT Main Menu and that U (UTILITIES) and S (SET PATHS).
     
2

     TRIPCMD : TRIPCMD or ? (no parameters)

     List all available Sysop Commands used in SYSOP mode

3
    
     DIR : DIR  /  DIR pathname /  DIR pathname TO pathname+filename.ext

     DIR :
     Directory Of The Files In The Current Active Directory

     DIR xxxxx :
     This is the same as DIR except with 1 parameter.

     Example : DIR *.ARC
                DIR C:\TRIP\ST*.LZH

     DIR xxxxxx TO yyyyyy :
     You can send the Files XXXXXX to YYYYYY.

     Examples: DIR *.* TO C:\TRIPBBS\LISTING.TXT
                DIR D:\WILD\*.TXT TO F:\CRAZY\WOW.TXT
                DIR *.* TO "AUX:" (send to Modem)
                DIR *.HLP TO "LST:" (send to Printer)

4
   
     FILES : FILES  /  FILES pathname  /  FILES pathname TO filename.ext

     FILES :
     Files is like DIR except it gives Length / Date / and Time

     FILES xxxxx :
     This is the same as FILES except with 1 parameter.

     Example : FILES *.ARC
                FILES C:\TRIPBBS\TRIPBASE\BASE*.*

     FILES xxxxxx TO yyyyyy:
     You can send the Files XXXXXX to YYYYYY.

     Examples: FILES *.* TO C:\TRIPBBS\LISTING.TXT
                FILES F:\UTILS\COOL\WOW.* TO F:\CRAZY\WOW.TXT
                FILES *.HLP TO "AUX:" (send to Modem)
                FILES *.* TO "LST:" (send to Printer)

5

     DEL : DEL parameters

     Example : DEL *.*
                DEL TEST*.TXT
                DEL *.DOC
                DEL C:\*.TXT

     Deletes a file or Set of Files.

6

    RENAME : RENAME oldname newname

    Example : Rename Crazy.TXT Wild.Doc

    Rename a file in the current directory From OLDNAME -> NEWNAME

7

     COPY : COPY source destination

     Example : COPY test.txt C:\TRIPBBS\CRAZY\
               COPY F:\wild.txt D:\TEMP\newwild.txt
               COPY *.HLP D:\TRIPBBS\MENUS_80\
               COPY E:\*.* \TRIPDATA\
 
     Copy a file or set of files from the source to destination        
     location.

8

     MOVE : MOVE source destination

  Example : MOVE test.txt C:\TRIPBBS\
            MOVE F:\wild.txt D:\crazy.txt
            MOVE E:\TEMP\*.ARC \STUTILS\
            MOVE *.ARC C:\TRIPBBS\TRIPDATA\

     Move is like copy except it deletes the source file after copying.

9

     MD : MD Fldrname.ext

     Make a Folder in the Current Directory.

10

     CD :  CD.. or  CD Fldrname.ext

     CD.. , CD TRIPLINK , CD TRIPLINK\TRIPBASE
     
     CD \ Moves you to the Root of the Current Drive   

     Change to another Directory from the Current Directory.

11

     RD : RD Foldname.ext

     Remove a Folder from the Current Directory.

12

     EXEC : EXEC program.ext (TOS or PRG)

     Execute a *.TOS or *.PRG program. You cannot call any TTP files with
     this because it does not pass any parameters to it. When you are local
     it will use a File Select Box!  

13 

     EDIT : EDIT filename

     Example : EDIT crazy.txt
                 EDIT F:\THIS\IS\WILD\DUDE\hell.txt

     Edit a text file using the same Editor you do when you type messages
     in the message bases. This is NOT a binary file editor, for instance
     dont EDIT any LZHs/ARCs/ZIPs/PRGs/TTPs/TOSs etc..

14

     TYPE : TYPE filename

     Example : TYPE C:\goodfile.VT2
               TYPE F:\TRIPBBS\testing.ANS
               TYPE D:\WHAT\THE\HELL.VT2
               TYPE regular.txt

     Show a file in raw form. This works with most any type of files.               
     My main use (maybe yours) is to call my ST from work while   
     on the PC, and I can preview any of the ( *.ANS ) files I made on 
     the PC and uploaded to my ST so I can use the (*.ANS) as a MENU 
     or whatever. The files with the extension (*.ANS) are ANSI Graphic
     files, they can be viewed when using an ANSI compatible system while
     remote, you cant view ANSI from the Desktop yet. 
     So they may look like just crap when at the console on the ST but
     look GREAT! as a MENU for PC users. Also, I can call from
     someones house using the IGXXX.EMU in Interlink on an ST, and I
     can I can view any (*.IG) Files that can also be used as Menus.
     (*.IG Cannot be viewed From the Console!)
     Of course any files with the Extension (*.VT2) I use as VT2 
     files and they look great from the console.

15
    
     DATE : DATE  /  DATE xx/xx/xx

     Show or Set the Current Date.

16
    
     TIME : TIME  /  TIME xx:xx:xx

     Show or Set the Current Time. Must set in 24 hour format. The
     easiest way to remember what time it is, is by adding 12 to the
     time if its 12pm or later, like 1:30pm is 13:30:00.

17

     LINKPATH : LINKPATH ( no parameters )

     While in Sysop Mode. You can LINK the Current Directory into the FEDBBS
     file listing. For Instance, if youre in the Directory D:\STUTILS\ and
     you had 5 File areas. You could type LINKPATH and it would add the
     D:\STUTILS\ as File area #6. The Name of the New file Area Must be
     changed to your liking. You can use EDITFILES in Sysop Mode, or Select 
     Option #2 from TOOLSET #2 on the DropDown Menu to change the Pathnames
     and File Area Names.

18

     NEWFILES : Search for New Files Added to the FEDBBS Linked File Areas.

19

     RESTORE : RESTORE ( no parameters )

     Restore System files from the TRIPBACK Folder, after the command
     BACKUP has been run. There are only 2 Main Files that are backed up
     and protected. They are TRIPDATA.DAT and TRIPUSER.DAT. Just in case
     you or the FEDBBS trips out and Mangles the TRIPDATA.DAT / TRIPUSER.DAT
     then Restore will help you out. Try and do a Backup as much as often.

20
 
     BACKUP : BACKUP ( no parameters )

     Backup the TRIPDATA.DAT / TRIPUSER.DAT into the TRIPBACK Folder. This
     was not intended for a Complete System backup. This was made so it
     will take very little time and these 2 files are very critical to the
     FEDBBS. So if your smart and dont want to take chances , then for the 
     hell of it select the BACKUP option on the Waitcall Screen once in a 
     while.

     Using TRIPHOOKS in TripEdiT! (in the FEDBBS) you can force TLINK to
     automatically backup these files each time a New User logs on!

21
    
     LINK : LINK filename / LINK ** (List Directorys)

   Example: LINK sys 
            LINK Desktop.inf
            LINK *.LZH

     To use the command LINK you must do 2 things. Fist goto TOOLSET #1
     on the dropdown menus and select the option to Create a SYSTEM.LST.
     After that has completed, run the other Option Create SYSTEM.TXT.
     They Must be ran in that order!!!!! Because SYSTEM.TXT is build from
     the SYSTEM.LST. SYSTEM.LST contains the Folder Names of ALL your
     folders on ALL Partitions , while SYSTEM.TXT contians the Folder
     names AND the Files within Each Folder. SYSTEM.LST can be changed
     with any text editor also. The Difference between the command LINK
     and HUNT is that , HUNT is what option K from the main Menu Uses.
     LINK searches ALL Files , and HUNT is a Subset of HUNT. See HUNT also.

22

     ARC : ARC (No Parameters, Prompts Instead)

     Start up ARC.TTP and type the Parameters for it to act on.
     Please read the Docs on this Program if you dont know the
     command switches for it. ARC I mean of course. Please support
     the Author of this Sharware Program.

23

     LZH : LZH (No Parameters, Prompts Instead)

     Start up LZH.TTP and type the Parameters for it to act on.
     Please read the Docs on this program if you dont know the
     command Switches for LZH. Please Support the Author of the
     this Sharware Program.

24

     TTP : TTP <return>

     This will prompt you to Enter the TTP Filename when remote, then
     ask you for the parameters. If you are local (No Carrier) then
     it will pop up with a File Select Box and After you select OK, it
     will then prompt you for the parameters.

25

All Versions:

      INJECT : INJECT filename.ext XX 

   Example : INJECT C:\BBS\WILD\CRAZY.TXT 01
  
For Version 7.0 and Above:

      INJECT : INJECT filename.ext XX | <USER> | <MESSAGE TITLE>

               INJECT C:\TRIP.DOC 04 | ALL | This is the Title 
 From a Menu : POSCMD>INJECT C:\TRIP.DOC 04 | ~6~ | TripLink! Is GreaT

     Injects an ascii text file in a message base from the current 
     directory. The Value XX MUST be a 2 Digit number ( 02 12 09 etc..)
     XX=1 to 32 (Version 7+ is 64). You can use this in Menus wth POSCMD>
     The UserName and Title with the "|" are optional! You can specify a
     Username or ALL and the Title is truncated after 28 characters. 
     The last examples apply to versions above v7.0. The Default for User
     and Title is: ALL / POS Injected Message

26
  
     DFREE : DFREE or DFREE XX (XX= D:, F: etc..)

     Example : DFREE
               DFREE A:
               DFREE C:
     
     Shows the amount of free space on a certian Disk. When DFREE is typed
     without any Drive (C: D: etc..) then it shows Free Space on All Drives
     Active on the System.

27

     MEM : Show Available FREE Memory on your System

28

     HUNT : HUNT [prompted] / HUNT filename / HUNT ** (List Directorys)

     Example: HUNT st
              HUNT *.ARC
              HUNT control.acc

     Please read about LINK First. After Creating the SYSTEM.LST (see LINK)
     edit the SYSTEM.LST file and Delete out any directorys you do not want
     users to be searching through, and save it as PD.LST in the TRIPDATA
     folder. After that run the CREATE PD.TXT from the TOOLSET #1 Drop Down
     Menu on the FEDBBS. It will create a PD.TXT file in TRIPDATA and your
     Option K on the main Menu will be operational. The HUNT in SYSOP mode
     can now be used. You can Edit the PD.LST file and recreate a new file
     PD.TXT at any time. DO NOT SAVE "DESC" pathnames like C:\TEST\DESC\
     because they are useless for users to search through, in your PD.LST
     that is.

29

    CLRCALLS : Clear All The Caller Names From The Caller Log In the file
               TRIPDATA.DAT. This is the list shown when option W is taken
               from the Main Menu. This does not clear the TRIPBBS.LOG File
               THIS CLEARS THE ( WHOS CALLED ) log....

30 

     BBSLOG : Display the FEDBBS Log file (TRIPBBS.LOG) TripLinK! Created

31

     CLRLOG : Clear the FEDBBS log file TRIPBBS.LOG

32

     FILELOC : Show Filename/Pathnames of the File Areas On TripLinK!

33

     EDITFILES: EDITFILES ( no parameters )

     MANAGES FILE AREAS LINKED TO THE SYSTEM!   

     Calls the Extended File Editor. Files can be deleted or added with this
     editor. Both File Area Name and Pathname can be changed using this
     menu. It can also be called from TOOLSET #2. These are the file areas
     that you use on the FEDBBS with Option F. When choosing an option
     it will ask you for the NAME OF THE BASE! then the PATHNAME to where
     the files are. Always use the "\" at the end of the file path. By
     hitting SPACE 2 times on each line, The Name, Then Pathname, that file
     area will be removed.

34
END
