Additional information for owners of "Compaq" computers
using the TABWORKS shell. . .  Running the installation directly 
from TABWORKS may not create the tab (page) and icon(s) after
the files are transferred.  If you installed from TABWORKS and
did not have icon(s) appear on a new page, follow the steps
outlined below:

        "TABWORKS" is a replacement shell for the Windows
Program Manager.  In order for the Groups and program Icons
to be created, Program Manager must be running.  You can start
Program Manager by clicking on the TABWORKS icon for Program
Manager or using FILE  |  RUN  and enter PROGMAN at the command
line.

        Re-start the installation in Program Manager -- use  
FILE  |  RUN   and at the command line enter the drive letter of 
your source drive followed by :\SETUP      press the [Enter] key.  
Assuming that the source drive letter is A, this is what you would 
enter at the command line:

                A:\CV

and press the [Enter] key.  It's that easy.

        Group(s) and Icon(s) will then be created in Program Manager.
Please see the documentation you received with your computer about 
TABWORKS (or the on-line Help) for instructions for creating pages 
in TABWORKS which correspond to the Groups in Windows Program Manager.




"Compaq" is a registered trademark (tm) of Compaq Computer Corporation.
"Tabworks" is copyright (c) Xerox Corporation.
"Windows" and "Program Manager" refer to Micro Soft Windows copyright (c)
Micro Soft Corporation.

5/95  Micro Star Software