[Source Media Descriptions]

    1 = "Labelled Performance Tools"

[GeneralConstants]
    ; Constants to support the use of radio button dialogs

    Radio1  = "1"
    Radio2  = "2"

    ; Constants to support the use of checkbox dialogs
    Chosen    = "ON"
    NotChosen = "OFF"

[LanguageID]

    LANGID_ENG = ENG

[ProcessorID]

    ProcessorID_I386  = I386
    ProcessorID_I486  = I486
    ProcessorID_I586  = I586
    ProcessorID_R4000 = R4000
    ProcessorID_ALPHA = Alpha_AXP

[PlatformID]

    PlatformID_I386 = i386
    PlatformID_MIPS = mips
    PlatformID_ALPHA = alpha

[ProcessorVar]

    STF_PROCESSOR = "" ? $(LIBHANDLE) GetProcessor
    STF_PLATFORM  = ""

[LanguageVar]

    STF_LANGUAGE       = "" ? $(LIBHANDLE) GetLanguage
    STF_WINDOWSSYSPATH = "" ? $(LIBHANDLE) GetWindowsNtSysDir

[UiVars]
    BuildVersion   = "08-93"

    ; Destination TOOLS Drive Particulars
    VolumeList      = {} ? $(LIBHANDLE) GetHardDriveLetters
    VolumeFreeList  = {} ? $(LIBHANDLE) GetHardDriveFreeSpace
    VolumeFSList    = {} ? $(LIBHANDLE) GetHardDriveFileSystems
    DestVolume      = ""

    ; Defualt tools directory
    TOOLDIR = "\PerfTool"

    ; BOOK Setup Help IDs

    !IDH_DB_TOOLSWELCOME_INS   = 3000
    !IDH_DB_MSTINSTALLMODE_INS = 3010
    !IDH_DB_MSTDEST_INS        = 3020
    !IDH_DB_MSTOPTIONS_INS     = 3030

[ToolVars]

    ToolsSize     = 2
    TotalSize     = 4

    DoMeasTool       = $(Chosen)
    DoProbe          = $(Chosen)
    DoSrc            = $(NotChosen)
    DoAll            = $(NotChosen)

[StringsENG]

    String1 = "Setup cannot install on the current processor."$(!LF)$(!LF)+
              "Cannot proceed with install."

    String2 = "Setup couldn't copy over the tools files."$(!LF)$(!LF)+
              "Cannot proceed with install."

    String3 = "Setup needs the full path specification of your destination.  Please "+
              "reenter a new path.  An example of a full path is: "

    String4 = "The drive specified in the destination path does not "+
              "have enough space for a minimal installation.  Please enter a "+
	      "new path."

    String5 = "There is no free space to install the components."

    String6 = "Setup has detected that you have chosen to install to a network "+
	      "drive.  If you are certain that this drive is valid, and that "+
              "it has sufficient space, please choose OK to continue.  Otherwise, "+
              "choose Cancel to specify another drive."

;----------------------------------------------------
; BILLBOARD MESSAGES
;----------------------------------------------------

[BillboardsENG]

Billboard1 = "Please wait while Setup creates directories on the destination drive..."

[WelcomeDlgENG]

    DlgType     = "Info"
    DlgTemplate = "WELCOME"
    Caption     = "Optimizing Windows NT Tools Setup"

    DlgText     = "Welcome to the Optimizing Windows NT Tools Setup Program."$(LF)$(LF)+
                  "Setup installs the Optimizing Windows NT Tools.  "+
                  "Each setup dialog has basic instructions for "+
                  "completing a step of the installation."$(LF)$(LF)+
                  "To install the Optimizing Windows NT Tools on your computer now, choose Continue "+
                  "or press Enter."$(LF)$(LF)+
                  "To exit Setup without installing the Optimizing Windows NT Tools, choose Exit "+
                  "or press F3."

    Continue     = "&Continue"
    Help         = "&Help"
    Exit         = "E&xit"
    HelpContext  = $(!IDH_DB_MSTWELCOME_INS)

[DestinationDlgENG]

    DlgType      = "Combination"
    DlgTemplate  = "DESTTOOLS"
    Caption      = "Optimizing Windows NT Tools Destination"

    DlgText      = "Setup recommends installing the Optimizing Windows NT Tools on the drive indicated "+
                   "below."

    Combo1Label  = "Destination Drive:"

    Continue     = "&Continue"
    Help         = "&Help"
    Exit         = "E&xit"
    HelpContext  = $(!IDH_DB_MSTDEST_INS)

    GroupLabel   = "Destination Drive Characteristics"

    Static1Label = "Available Space:"
    Static1Text  = $(DestVolumeFree)
    footer1      = "MB"
    footer2      = "Setup all processors"
    footer3      = "Setup current system"
    Static2Label = "Tool Space Needed:"
    Static2Text  = $(TotalSize)
    Static3Text  = $(ToolsSize)

    TextFields   = {$(Static1Text), $(Static2Text), $(Static3Text)}

    ; Editboxes in the dialog

    EditLabel   = "Tool Directory:"
    EditTextLim = 256
    EditTextIn  = $(BASEDIR)
    EditFocus   = "ALL"

    Combo1List   = $(DestVolumeList)
    Combo1Out    = $(DestVolume)

    ComboListItemsIn  = {Combo1List}
    ComboListItemsOut = {Combo1Out}

    NotifyFields = {YES}

[ToolOptionDlg]
    DlgType     = "Check"
    DlgTemplate = "PDKOPTIONS"
    Caption     = "Optimizing Windows NT Tools Setup"
    DlgText     = "You can optionally install the components listed "+
                  "below."$(!LF)$(!LF)+
                  "To copy and install a component, select it's checkbox."$(!LF)$(!LF)+
                  "To skip a component, clear it's checkbox."$(!LF)$(!LF)

    Check1Text  = "&Measurement Tools"
    Check2Text  = "&Sample Performance Monitor source"
    Check3Text  = "&Response Probe Synthetic Workload Generator"
    Check4Text  = "Install for &all processor types"
    Continue    = "&Continue"
    Help        = "&Help"
    Exit        = "E&xit"
    HelpContext = $(!IDH_DB_MSTOPTIONS_INS)
    CheckItemsIn = { $(!Chosen), $(!NotChosen), $(!Chosen), $(!NotChosen) }
    OptionsGreyed = {}

[SetupDoneDlgENG]

    DlgType     = "Info"
    DlgTemplate = "RESTART"
    Caption     = "Optimizing Windows NT Tools Setup"
    DlgText     = "The Optimizing Windows NT Tools have been successfully installed."$(LF)$(LF)+
                  "Please choose Exit to return to Windows NT."
    Windows     = "E&xit to Windows NT"

[SetupNotDoneDlgENG]

    DlgType     = "Info"
    DlgTemplate = "RESTART"
    Caption     = "Optimizing Windows NT Tools Setup"
    DlgText     = "The Optimizing Windows NT Tools were not successfully installed."$(LF)$(LF)+
                  "Please choose Exit to return to Windows NT."
    Windows     = "E&xit to Windows NT"

[LoadSetupLibrary]

    LoadLibrary "x" $(STF_CWDDIR)setupdll.dll LIBHANDLE
    exit

[FreeLibraries]

    FreeLibrary $(LIBHANDLE)
    exit

[ProgressCopyENG]

    ProCaption   = "Optimizing Windows NT Performance Tools Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "The Optimizing Windows NT Tools aren't completely installed.  Are you sure "+
                   "you want to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

[Shell Commands]

    ; Initialise the app, by setting the caption and loading the support library

    set-title "Optimizing Windows NT Tools Setup"
    set Exit_Code = $(!SETUP_ERROR_GENERAL)

    install   LoadSetupLibrary

    ; put up the hourglass
    StartWait

    ; read general constants
    set-subst LF = "\n"
    read-syms GeneralConstants

    ; read the platform independent choices
    read-syms LanguageID
    read-syms ProcessorID
    read-syms PlatformID

    ; read the default language and try to detect the language
    read-syms LanguageVar
    detect    LanguageVar

    ; read and detect the processor we are working on
    read-syms ProcessorVar
    detect    ProcessorVar
    read-syms Strings$(!STF_LANGUAGE)
    read-syms Billboards$(!STF_LANGUAGE)

    ; Check processor type
    ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I386)
        set STF_PLATFORM = $(PlatformID_I386)
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I486)
        set STF_PLATFORM = $(PlatformID_I386)
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I586)
        set STF_PLATFORM = $(PlatformID_I386)
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_R4000)
        set STF_PLATFORM = $(PlatformID_MIPS)
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_ALPHA)
        set STF_PLATFORM = $(PlatformID_ALPHA)
    else
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String1)
        goto setupnotdone
    endif

    ; read the UI Variables and detect their setting on the current machine
    read-syms UiVars
    detect    UiVars
    read-syms ToolVars

    ; setup the STF_SRCPATH
;    split-string PATHCOMP $(!STF_SRCINFPATH) \
;    set STF_SRCDIR = ""
;    forlistdo $(PATHCOMP)
;	ifstr(i) $($) != "install.inf"
;	    set STF_SRCDIR = $(STF_SRCDIR)$($)
;	endif
;    endforlistdo

    ; remove the hourglass
    EndWait

welcome =+

    read-syms WelcomeDlg$(STF_LANGUAGE)
    ui start "Welcome"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto setdestination
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "" QueryUserQuit
        ifstr(i) $($R1) == "OK"
            ui pop 1
            goto setupnotdone
        else
            goto welcome
        endif
    else
        goto end
    endif

setdestination =+

    ; go through the volume list and form the destination volume list of
    ; all volumes which have the size needed to install the tools.

    set DestVolumeList = {}
    set DestVolumeFreeList = {}

    ForListDo $(VolumeList)

       set CurrentVolume      = *($(VolumeList), $(#))
       set CurrentVolumeFree  = *($(VolumeFreeList), $(#))
       set CurrentVolumeFS    = *($(VolumeFSList), $(#))

       set DestVolumeList     = >($(DestVolumeList),     $(CurrentVolume))
       set DestVolumeFreeList = >($(DestVolumeFreeList), $(CurrentVolumeFree))

    EndForListDo

    ; destination drive is the drive with the maximum space

    set DestVolume     = ""
    set DestVolumeFree = 0

    ForListDo $(DestVolumeList)
        set Volume     = $($)
        set VolumeFree = *($(DestVolumeFreeList), ~($(DestVolumeList), $(Volume)))

        ifint $(VolumeFree) > $(DestVolumeFree)
            set DestVolume     = $(Volume)
            set DestVolumeFree = $(VolumeFree)
        endif

    EndForListDo

    set BASEDIR = $(DestVolume)$(TOOLDIR)

destination =+

    ; display tools destination, size available and needed for
    ; user approval

    read-syms DestinationDlg$(STF_LANGUAGE)
    ui start "Destination"
    ifstr(i) $(DLGEVENT) == "NOTIFY"

        ifstr(i) $(Combo1Out) != $(DestVolume)
            set ReInit = YES
            set DestVolume     = $(Combo1Out)
            set DestVolumeFree = *($(DestVolumeFreeList), ~($(DestVolumeList), $(DestVolume)))
            set BASEDIR     = $(DestVolume)$(TOOLDIR)
        else
            set ReInit = NO
        endif
        goto destination

    else-ifstr(i) $(DLGEVENT) == "CONTINUE"
        set ReInit = NO
        LibraryProcedure IsFullPath, $(LIBHANDLE), CheckPathFullPathSpec $(EditTextOut)
        ifstr(i) $(IsFullPath) == "NO"
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3)$(DestVolume)$(TOOLDIR)
            goto destination
        else
            GetDriveInPath Drive, $(EditTextOut)
            Ifcontains(i) $(Drive) in $(DestVolumeList)
                set DestVolume     = $(Drive)
                set DestVolumeFree = *($(DestVolumeFreeList), ~($(DestVolumeList), $(DestVolume)))
                set BASEDIR     = $(EditTextOut)
		ifint $(DestVolumeFree) < $(TotalSize)
		    shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String4)
		    goto destination
		endif
            else
                shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String6)
                ifstr(i) $($R0) != STATUS_SUCCESSFUL
			goto destination
                else
                    ifstr(i) $($R1) == "OK"
			set DestVolume = $(Drive)
			set DestVolumeFree = $(TotalSize)
			set BASEDIR = $(EditTextOut)
                    else
                        set ReInit = NO
                        goto destination
                    endif
                endif
            endif
        endif

        ui pop 1
        goto queryinstall

    else-ifstr(i) $(DLGEVENT) == "EXIT"

        set ReInit = NO
        shell "" QueryUserQuit
        ifstr(i) $($R1) == "OK"
            ui pop 1
            goto setupnotdone
        else
            goto destination
        endif
    else
        goto end
    endif

queryinstall =+

    read-syms ToolOptionDlg
    ui start "Options" 
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set DoMeasTool  = *($(CheckItemsOut), 1)
        set DoSrc       = *($(CheckItemsOut), 2)
        set DoProbe     = *($(CheckItemsOut), 3)
        set DoAll       = *($(CheckItemsOut), 4)
        ui pop 1
        goto tooldirs
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "" QueryUserQuit
        ifstr(i) $($R1) == "OK"
            ui pop 1
            goto setupnotdone
        else
            goto queryinstall
        endif
    else
        goto "end"
    endif

tooldirs = +

    ; First define the destination directories for the tools
    set MEASDir         = $(BASEDIR)\meastool
    set PROBEDir        = $(BASEDIR)\probe
    set PERFSRCDir      = $(BASEDIR)\src

toolinstall	=+
    StartWait

    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard1)
    install Install-CopyToolsFiles
    shell "subroutn.inf" PopBillboard

    EndWait

finish = +
    read-syms ProgressCopy$(STF_LANGUAGE)
    install Install-All-Files-Now
    ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_SUCCESS"
        goto setupdone
    else
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String2)
        goto setupnotdone
    endif

setupdone=+

    set Exit_Code = $(!SETUP_ERROR_SUCCESS)
    read-syms SetupDoneDlg$(STF_LANGUAGE)

    ui start "Done"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto end
    else
        goto end
    endif

setupnotdone=+

    read-syms SetupNotDoneDlg$(STF_LANGUAGE)

    ; remove the hourglass
    EndWait

    ui start "NotDone"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto end
    else
        goto end
    endif

end = +

    install   FreeLibraries
    exit

[QueryUserQuit]

    set Status     = STATUS_FAILED
    set UserAction = CANCEL

    ; read in quit message

    read-syms ExitWarningDlg$(!STF_LANGUAGE)
    ui start "ExitWarning"
    ifstr(i) $(DLGEVENT) == "YES"
        set Status     = STATUS_SUCCESSFUL
        set UserAction = "OK"

    else-ifstr(i) $(DLGEVENT) == "NO"
        set Status     = STATUS_SUCCESSFUL
        set UserAction = "CANCEL"
    else
    endif

fin_QueryUserQuit = +
    Return $(Status) $(UserAction)

[ExitWarningDlgENG]

    DlgType      = "MessageBox"
    STF_MB_TITLE = "Exit Optimizing Windows NT Tools Setup"
    STF_MB_TEXT  = "The Optimizing Windows NT Tools are not completely installed.  Are you "+
                   "sure you want to exit Setup?"
    STF_MB_TYPE  = 3
    STF_MB_ICON  = 5
    STF_MB_DEF   = 2

[Install-CopyToolsFiles]

    set STF_VITAL = ""
    set STF_DECOMPRESS = 1
    CreateDir  $(BASEDIR)
    ifstr(i) $(!DoProbe) == $(!Chosen)
        CreateDir  $(PROBEDir)
        ifstr(i) $(!DoAll) == $(!Chosen)
            CreateDir  $(PROBEDir)\$(PlatformID_I386)
            CreateDir  $(PROBEDir)\$(PlatformID_MIPS)
            CreateDir  $(PROBEDir)\$(PlatformID_ALPHA)
        else
            CreateDir  $(PROBEDir)\$(STF_PLATFORM)
        endif
        
        CreateDir  $(PROBEDir)\example
    endif
    ifstr(i) $(!DoMeasTool) == $(!Chosen)
        CreateDir  $(MEASDir)
        ifstr(i) $(!DoAll) == $(!Chosen)
            CreateDir  $(MEASDir)\$(PlatformID_I386)
            CreateDir  $(MEASDir)\$(PlatformID_MIPS)
            CreateDir  $(MEASDir)\$(PlatformID_ALPHA)
        else
            CreateDir  $(MEASDir)\$(STF_PLATFORM)
        endif
    endif
    ifstr(i) $(!DoSrc) == $(!Chosen)
        CreateDir  $(PERFSRCDir)
        CreateDir  $(PERFSRCDir)\PerfMon
    endif

    AddSectionFilesToCopyList Files-Main           $(STF_SRCDIR) $(BASEDIR)
    ifstr(i) $(!DoProbe) == $(!Chosen)
        AddSectionFilesToCopyList Files-Main           $(STF_SRCDIR)probe $(PROBEDir)
        ifstr(i) $(!DoAll) == $(!Chosen)
            AddSectionFilesToCopyList Files-Probe-bin  $(STF_SRCDIR)probe\$(PlatformID_I386) $(PROBEDir)\$(PlatformID_I386)
            AddSectionFilesToCopyList Files-Probe-bin  $(STF_SRCDIR)probe\$(PlatformID_MIPS) $(PROBEDir)\$(PlatformID_MIPS)
            AddSectionFilesToCopyList Files-Probe-bin  $(STF_SRCDIR)probe\$(PlatformID_ALPHA) $(PROBEDir)\$(PlatformID_ALPHA)
        else
            AddSectionFilesToCopyList Files-Probe-bin  $(STF_SRCDIR)probe\$(STF_PLATFORM) $(PROBEDir)\$(STF_PLATFORM)
        endif
        AddSectionFilesToCopyList Files-Probe-example  $(STF_SRCDIR)probe\example $(PROBEDir)\example
    endif
    ifstr(i) $(!DoSrc) == $(!Chosen)
        AddSectionFilesToCopyList Files-Main           $(STF_SRCDIR)src $(PERFSRCDir)
        AddSectionFilesToCopyList Files-PerfMonSrc     $(STF_SRCDIR)src\perfmon $(PERFSRCDir)\PerfMon
    endif
    ifstr(i) $(!DoMeasTool) == $(!Chosen)
        AddSectionFilesToCopyList Files-Main           $(STF_SRCDIR)MeasTool $(MEASDir)
        ifstr(i) $(!DoAll) == $(!Chosen)
            AddSectionFilesToCopyList Files-MeasTool-bin   $(STF_SRCDIR)MeasTool\$(PlatformID_I386) $(MEASDir)\$(PlatformID_I386)
            AddSectionFilesToCopyList Files-MeasTool-bin   $(STF_SRCDIR)MeasTool\$(PlatformID_MIPS) $(MEASDir)\$(PlatformID_MIPS)
            AddSectionFilesToCopyList Files-MeasTool-bin   $(STF_SRCDIR)MeasTool\$(PlatformID_ALPHA) $(MEASDir)\$(PlatformID_ALPHA)
        else
            AddSectionFilesToCopyList Files-MeasTool-bin   $(STF_SRCDIR)MeasTool\$(STF_PLATFORM) $(MEASDir)\$(STF_PLATFORM)
        endif
    endif

    exit

[Install-All-Files-Now]
    CopyFilesInCopyList
    exit

[Files-Main]
1,readme.txt,      !DECOMPRESS

[Files-Probe-bin]
1,creatfil.ex_,    RENAME=creatfil.exe
1,probe.ex_,       RENAME=probe.exe
1,probeprc.ex_,    RENAME=probeprc.exe
1,statw32.dl_,     RENAME=statw32.dll
1,timerw32.dl_,    RENAME=timerw32.dll
1,wait.ex_,        RENAME=wait.exe

[Files-Probe-example]
1,1024.SP_,        RENAME=1024.SCP
1,1024.SR_,        RENAME=1024.SCR
1,1024.ST_,        RENAME=1024.SCT
1,2048.SP_,        RENAME=2048.SCP
1,2048.SR_,        RENAME=2048.SCR
1,2048.ST_,        RENAME=2048.SCT
1,4096.SP_,        RENAME=4096.SCP
1,4096.SR_,        RENAME=4096.SCR
1,4096.ST_,        RENAME=4096.SCT
1,512.SP_,         RENAME=512.SCP    
1,512.SR_,         RENAME=512.SCR    
1,512.ST_,         RENAME=512.SCT    
1,DOPROBE.BA_,     RENAME=DOPROBE.BAT

[Files-MeasTool-bin]
1,CLEARMEM.EX_, RENAME=CLEARMEM.EXE
1,CTRLIST.EX_, RENAME=CTRLIST.EXE
1,KILL.EX_, RENAME=KILL.EXE
1,LODCTR.EX_, RENAME=LODCTR.EXE
1,NTIMER.EX_, RENAME=NTIMER.EXE
1,PERFMTR.EX_, RENAME=PERFMTR.EXE
1,PMON.EX_, RENAME=PMON.EXE
1,PVIEW.EX_, RENAME=PVIEW.EXE
1,SETEDIT.EX_, RENAME=SETEDIT.EXE
1,TLIST.EX_, RENAME=TLIST.EXE
1,UNLODCTR.EX_, RENAME=UNLODCTR.EXE
1,VADUMP.EX_, RENAME=VADUMP.EXE
1,WPERF.EX_, RENAME=WPERF.EXE

[Files-PerfMonSrc]
1,ADDLINE.C_,   RENAME=ADDLINE.C
1,ADDLINE.DL_,  RENAME=ADDLINE.DLG
1,ADDLINE.H_,   RENAME=ADDLINE.H
1,ADDLOG.C_,    RENAME=ADDLOG.C
1,ADDLOG.DL_,   RENAME=ADDLOG.DLG
1,ADDLOG.H_,    RENAME=ADDLOG.H
1,ALERT.C_,     RENAME=ALERT.C
1,ALERT.H_,     RENAME=ALERT.H
1,ALERTS.BM_,   RENAME=ALERTS.BMP
1,ALRTDISP.DL_, RENAME=ALRTDISP.DLG
1,ALRTOPTN.DL_, RENAME=ALRTOPTN.DLG
1,BOOKMARK.C_,  RENAME=BOOKMARK.C
1,BOOKMARK.H_,  RENAME=BOOKMARK.H
1,CHOSECOM.C_,  RENAME=CHOSECOM.C
1,CHOSECOM.DL_, RENAME=CHOSECOM.DLG
1,COMMAND.C_,   RENAME=COMMAND.C
1,COMMAND.H_,   RENAME=COMMAND.H
1,COUNTERS.C_,  RENAME=COUNTERS.C
1,COUNTERS.H_,  RENAME=COUNTERS.H
1,DATASRC.C_,   RENAME=DATASRC.C
1,DATASRC.DL_,  RENAME=DATASRC.DLG
1,DATASRC.H_,   RENAME=DATASRC.H
1,DIALOGS.C_,   RENAME=DIALOGS.C
1,DIALOGS.H_,   RENAME=DIALOGS.H
1,DISPOPTN.H_,  RENAME=DISPOPTN.H
1,DIVLARGE.C_,  RENAME=DIVLARGE.C
1,DIVLARGE.H_,  RENAME=DIVLARGE.H
1,DLGIDS.H_,    RENAME=DLGIDS.H
1,EXPORT.C_,    RENAME=EXPORT.C
1,EXPORT.DL_,   RENAME=EXPORT.DLG
1,FILEOPEN.C_,  RENAME=FILEOPEN.C
1,FILEOPEN.H_,  RENAME=FILEOPEN.H
1,FILESAVE.C_,  RENAME=FILESAVE.C
1,FILEUTIL.C_,  RENAME=FILEUTIL.C
1,FILEUTIL.H_,  RENAME=FILEUTIL.H
1,GLOBALS.H_,   RENAME=GLOBALS.H
1,GRAFDATA.C_,  RENAME=GRAFDATA.C
1,GRAFDATA.H_,  RENAME=GRAFDATA.H
1,GRAFDISP.C_,  RENAME=GRAFDISP.C
1,GRAFDISP.H_,  RENAME=GRAFDISP.H
1,GRAPH.C_,     RENAME=GRAPH.C
1,GRAPH.H_,     RENAME=GRAPH.H
1,HELPLINE.RC_, RENAME=HELPLINE.RC
1,INIT.C_,      RENAME=INIT.C
1,INIT.H_,      RENAME=INIT.H
1,INTRLINE.C_,  RENAME=INTRLINE.C
1,INTRLINE.H_,  RENAME=INTRLINE.H
1,LARGEINT.AS_, RENAME=LARGEINT.ASM
1,LARGEINT.H_,  RENAME=LARGEINT.H
1,LEGEND.C_,    RENAME=LEGEND.C
1,LEGEND.H_,    RENAME=LEGEND.H
1,LINE.C_,      RENAME=LINE.C
1,LINE.H_,      RENAME=LINE.H
1,LOG.C_,       RENAME=LOG.C
1,LOG.H_,       RENAME=LOG.H
1,LOGDISP.DL_,  RENAME=LOGDISP.DLG
1,LOGOPTNS.C_,  RENAME=LOGOPTNS.C
1,LOGOPTNS.DL_, RENAME=LOGOPTNS.DLG
1,LOGOPTNS.H_,  RENAME=LOGOPTNS.H
1,LOGS.BM_,     RENAME=LOGS.BMP
1,MEMORY.C_,    RENAME=MEMORY.C
1,MENUIDS.H_,   RENAME=MENUIDS.H
1,MENUS.RC_,    RENAME=MENUS.RC
1,OWNDRAW.H_,   RENAME=OWNDRAW.H
1,PERFDATA.C_,  RENAME=PERFDATA.C
1,PERFDATA.H_,  RENAME=PERFDATA.H
1,PERFERR.H_,   RENAME=PERFERR.H
1,PERFMON.BM_,  RENAME=PERFMON.BMP
1,PERFMON.C_,   RENAME=PERFMON.C
1,PERFMON.H_,   RENAME=PERFMON.H
1,PERFMON.IC_,  RENAME=PERFMON.ICO
1,PERFMON.RC_,  RENAME=PERFMON.RC
1,PERFMOPS.C_,  RENAME=PERFMOPS.C
1,PERFMOPS.H_,  RENAME=PERFMOPS.H
1,PERFMRC.H_,   RENAME=PERFMRC.H
1,PLAYBACK.C_,  RENAME=PLAYBACK.C
1,PLAYBACK.H_,  RENAME=PLAYBACK.H
1,PMEMORY.H_,   RENAME=PMEMORY.H
1,PMHELPID.H_,  RENAME=PMHELPID.H
1,PMRC.DL_,     RENAME=PMRC.DLG
1,PRINT.H_,     RENAME=PRINT.H
1,REGISTRY.C_,  RENAME=REGISTRY.C
1,REGISTRY.H_,  RENAME=REGISTRY.H
1,REPORT.C_,    RENAME=REPORT.C
1,REPORT.H_,    RENAME=REPORT.H
1,RPTOPTNS.C_,  RENAME=RPTOPTNS.C
1,RPTOPTNS.DL_, RENAME=RPTOPTNS.DLG
1,RPTOPTNS.H_,  RENAME=RPTOPTNS.H
1,SIZES.H_,     RENAME=SIZES.H
1,STATUS.C_,    RENAME=STATUS.C
1,STATUS.H_,    RENAME=STATUS.H
1,STRIDS.H_,    RENAME=STRIDS.H
1,STRINGS.RC_,  RENAME=STRINGS.RC
1,SYSTEM.C_,    RENAME=SYSTEM.C
1,SYSTEM.H_,    RENAME=SYSTEM.H
1,TIMEFRM.C_,   RENAME=TIMEFRM.C
1,TIMEFRM.DL_,  RENAME=TIMEFRM.DLG
1,TIMEFRM.H_,   RENAME=TIMEFRM.H
1,TIMELINE.C_,  RENAME=TIMELINE.C
1,TIMELINE.H_,  RENAME=TIMELINE.H
1,TOOLBAR.C_,   RENAME=TOOLBAR.C
1,TOOLBAR.H_,   RENAME=TOOLBAR.H
1,TYPEDEFS.H_,  RENAME=TYPEDEFS.H
1,UTILS.C_,     RENAME=UTILS.C
1,UTILS.H_,     RENAME=UTILS.H
1,VALUEBAR.C_,  RENAME=VALUEBAR.C
1,VALUEBAR.H_,  RENAME=VALUEBAR.H
1,WINHELPR.H_,  RENAME=WINHELPR.H



