[v7setup]
Rev = 1.57

1   = OK
2   = Cancel
3   = Help
4   = Card name : %s
5   = Memory : %d MByte
6   = Resolution
7   = Colors
8   = 16 colors
9   = 256 colors
10  = 64K colors
11  = True color
12  = Fonts
13  = small
14  = large
15  = Refresh rate
16  = Test
17  = Active display driver:

23  = Ver. %s

68  = v7truvbe.exe has to be executed before Windows can be restarted
69  = v7litvbe.exe has to be executed before Windows can be restarted
70  = Restart
71  = Exit to DOS
72  = No Restart
73  = Restart WINDOWS to activate the changes
74  = Please insert disk labelled "Drivers for Windows"
75  = %d x %d Pixels
76  = %d Hz Interlaced
77  = %d Hz
78  = ISA-BUS
79  = LOCAL-BUS
80  = SPEA / V7SETUP Ver.
81  = Restore
82  = Test is running. You can restore the former refresh rate or keep the active one.
83  = Keep
84  = PCI-BUS

85  = v7mervbe.exe has to be executed before Windows can be restarted
86  = v7mirvbe.exe has to be executed before Windows can be restarted
87  = v7provbe.exe has to be executed before Windows can be restarted

88  = ERROR : This program requires WINDOWS 3.1
89  = ERROR : "lzexpand.dll" cannot be loaded
90  = This program can be started only once
91  = No SPEA/V7 S3-Board found
92  = Not sufficient memory on the destination drive
93  = File "%s" cannot be created
94  = File "%s" cannot be copied
95  = WARNING : Program group cannot be created
96  = File "%s" not found
97  = ERROR : No driver is available for the chosen resolution
98  = If your screen creates garbage during the test, press ENTER to cancel the test
99  = SPEA BIGWIN %s

