[WINDOWS] SECTION
The [windows] section contains settings that affect the
following parts of your Windows environment:

 * Applications that start when you start Windows
 * Warning beep
 * Printing
 * Window border width
 * Keyboard speed
 * Mouse settings
 * Definition of files as documents or programs

The windows section can contain the following settings:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Beep=<yes-or-no>
  Default: yes
  Purpose: If this setting is enabled, Windows sounds a
           warning beep when you attempt to do something
           that is not allowed.
To change: Choose the Sound icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
BorderWidth=<number>
  Default: 3
  Purpose: Sets the width of the borders around all the
           windows on your desktop except those (such as
           Control Panel) that have a fixed size. The
           allowed range is 1 (narrowest) to 49 (widest).
To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
CursorBlinkRate=<milliseconds>
  Default: 530
  Purpose: Indicates how many milliseconds elapse between
           each blink of the selection cursor.
To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Device=<output-device-name>, <device-driver>,
       <port-connection>
  Default: none
  Purpose: Defines the default printer. The
           <output-device-name> value can be any device name
           given in the [devices] section. An explicit port
           and driver must be assigned to the device. The
           <device-driver> value is the filename (without
           the extension) of the device-driver file. The
           <port-connection> value is any portname given in
           the ports section.
To change: Choose the Printers icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
DeviceNotSelectedTimeout=<seconds>
  Default: 15
  Purpose: Specifies the default number of seconds for
           Windows to wait for a device to be switched on. A
           value is saved for each printer listed in the
           [PrinterPorts] section. If the device is not
           switched on during this time, Windows won't print
           to the device. Note that for some devices,
           Windows immediately posts an error message if the
           device is not already switched on.
To change: Use TWE to edit. This setting serves only as the
           system default value. To change the value for a
           particular printer, choose the Printers icon from
           the Control Panel window. Using Control Panel changes
           the corresponding value only in the PrinterPorts
           section.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Documents=<extensions>
  Default: none
  Purpose: Defines files that are to be considered
           "documents" by Windows. Files with the extensions
           listed in the extensions section of WIN.INI are
           automatically considered documents. Use this
           setting to define only document file extensions
           that are not in the [extensions] section. The
           extensions listed here are not associated with
           any application. Separate extension names with a
           space, and do not include the preceding periods.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
DoubleClickSpeed=<milliseconds>
  Default: 452
  Purpose: Establishes the maximum amount of time between
           clicks of the mouse button that the system
           will permit for one double-click. The lower the
           value, the less time you have to click twice in
           order to effect a double-click.
To change: Choose the Mouse icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
KeyboardSpeed=<milliseconds>
  Default: 31
  Purpose: Establishes how much time elapses between
           repetitions of a character on the display when
           you hold down a keyboard key. This setting does
           not work for all keyboards. If you delete this
           setting from WIN.INI, Windows Setup will not set
           this speed, but the speed will still be set if
           you choose the Keyboard icon in Control Panel
           (even if you cancel out of it).
To change: Choose the Keyboard icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Load=<filename(s)>
  Default: none
  Purpose: Specifies one or more applications that are to be
           run as icons when Windows is started. This
           value is a list of one or more filenames of
           applications, or documents that are associated
           with an application, each separated by a space.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
MouseSpeed=<0-or-1-or-2>
  Default: 1
  Purpose: Establishes the relationship between mouse
           movement and cursor movement when the value of
           either MouseThreshold1 or MouseThreshold2 is
           exceeded. When this occurs, Windows causes cursor
           movement to accelerate according to the value of
           MouseSpeed. If it is 0, there is no acceleration.
           If it is 1, the cursor is moved twice the normal
           speed when mouse movement exceeds the value of
           MouseThreshold1. If it is 2, the cursor is moved
           twice the normal speed when mouse movement
           exceeds the value of MouseThreshold1 or four
           times the normal speed if mouse movement exceeds
           MouseThreshold2.
To change: Choose the Mouse icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
MouseThreshold1=<pixels>
  Default: 5
  Purpose: Establishes the maximum number of pixels that
           the mouse can move between mouse interrupts
           before Windows alters the relationship between
           mouse movement and cursor movement. If the mouse
           movement exceeds this threshold and MouseSpeed is
           greater than zero, Windows moves the cursor at
           twice the normal speed.
To change: Choose the Mouse icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
MouseThreshold2=<pixels>
  Default: 10
  Purpose: Establishes the maximum number of pixels that
           the mouse can move between mouse interrupts
           before Windows alters the relationship between
           mouse movement and cursor movement. If the mouse
           movement exceeds this threshold and MouseSpeed is
           equal to 2, Windows moves the cursor at four
           times the normal speed.
To change: Choose the Mouse icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
NetWarn=<0-or-1>
  Default: 1
  Purpose: Specifies whether Windows should display a
           warning message if your system is configured to
           run a network and the network is not running or
           the wrong network is running. All Windows
           network-related options will be disabled if the
           network is disabled or incorrect. Setting this
           value to 0 will disable the warning message.
To change: Choose the Network icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
NullPort=<string>
  Default: "None"
  Purpose: Specifies the name used for a null port. This
           name appears in the Printers-Configure dialog box
           in Control Panel when a device is installed (that
           is, the device driver is present) but is not
           connected to any port. This value also appears
           for such a device in the devices section of
           WIN.INI.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Programs=<extensions>
  Default: com exe bat pif
  Purpose: Defines which files Windows regards as
           applications. Extension names are separated by a
           space and do not include the preceding periods.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Run=<filename(s)>
  Default: none
  Purpose: Tells Windows to run one or more specified
           applications when Windows is started. The value
           is a list of one or more filenames of
           applications, or documents associated with
           applications, each separated by a space.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Spooler=<yes-or-no>
  Default: yes
  Purpose: Specifies whether output to the printer is to be
           sent through Print Manager. Changing this value
           to no disables Print Manager.
To change: Choose the Printers icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
TransmissionRetryTimeout=<seconds>
  Default: 45
  Purpose: Specifies the default amount of time to give
           Windows for attempted transmission retries. A
           value is saved for each printer in the
           [PrinterPorts] section. If a successful
           transmission does not occur during this time,
           Windows posts a message box stating that the
           printer is not receiving characters.
To change: Use TWE to edit. This
           setting serves only as the system default value.
           To change the value for a particular printer,
           choose the Printers icon from the Control Panel.
           Using Control Panel changes the corresponding
           value only in the PrinterPorts section.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[DESKTOP] SECTION

The [desktop] section contains optional settings that
control the appearance of the screen background (desktop)
and the positioning of windows and icons on the screen.
The desktop section can contain the following settings:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
GridGranularity=<number>
  Default: 0
  Purpose: Specifies the size (in units of eight pixels)
           of the grid that Windows uses to position
           windows on the screen. The allowed range is 0
           through 49.
To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
IconSpacing=<pixels>
  Default: 77
  Purpose: Specifies the number of pixels that will appear
           between icons. Increasing this number increases
           the amount of space between icons.
To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Pattern=<b1 b2 b3 b4 b5 b6 b7 b8>
  Default: "(None)"  (This string appears when no pattern
                      is specified)
  Purpose: Specifies a pattern that is used to paint the
           screen background. The eight numeric values
           define a bitmap eight pixels wide and eight
           pixels high. Each decimal value represents a
           byte, and each byte represents a row of eight
           pixels. The following shows the effect of setting
           a bit:

           Setting   Effect
           -------   ------
              0      Sets the corresponding pixel to the
                     background color (specified by the
                     Background setting in the colors
                     section).
              1      Sets the corresponding pixel to the
                     foreground color (specified by the
                     WindowText setting in the colors
                     section).

           For example, if you set the <b1> value to the
           decimal value 175, the top row of pixels in the
           bitmap will appear as the binary equivalent
           (10101111) according to the preceding table.

To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
TileWallpaper=<0-or-1>
  Default: 0
  Purpose: Specifies whether to tile the desktop wallpaper
           across the screen (set this value to 0) or to
           center it (set this value to 1).
To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
Wallpaper=<bitmap-filename>
  Default: "(None)"  (This string appears when no pattern
                      is specified)
  Purpose: Supplies the name of a bitmap file. This bitmap
           appears on the screen background. You need to
           include the full pathname of the file if it is
           not in the Windows or system directory.
To change: Choose the Desktop icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
WallpaperOriginX=<x-coordinate>
  Default: 0
  Purpose: Adjusts the initial offset of a tiled wallpaper.
           The x-origin (default value) is the left side
           of the screen.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
WallpaperOriginY=<y-coordinate>
  Default: 0
  Purpose: Adjusts the initial offset of a tiled wallpaper.
           The y-origin (default value) is the top of the
           screen.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[EXTENSIONS] SECTION

The extensions section contains settings that link groups
of document files with an application so that opening one of
the document files automatically starts the application.
The extensions section can contain settings of the following
type:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
<extension>=<command-line>

  Purpose: Contains a list of filename extensions that
           identify documents, and corresponding command
           lines that are invoked when you choose a file
           that has the associated extensions.

           The <extension> keyname is an extension of one to
           three characters. The <command-line> value is an
           ordinary DOS command line. The command line
           always begins with an application filename (with
           the .EXE extension). This can be followed by any
           command parameters the application needs, usually
           including the document filename. The caret (^)
           character can be used when the original document
           filename is needed in the command line; the caret
           is replaced by the document filename without any
           extension. The most typical <extension> entries
           simply list the application name and the document
           name; for example:

             CAL=CALENDAR.EXE ^.CAL

           If you run a file called MYFILE.CAL after this
           association has been made, the Calendar progam
           will start and automatically open the file named
           MYFILE.

To change: Choose Associate from the File menu in File Manager.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[INTL] SECTION

The [intl] section describes how to display dates, times,
currency amounts, and other items for countries other than
the United States. The default values reflect U.S. options.
To change any setting in this section, choose the International
icon from the Control Panel window. The intl section can
contain the following settings:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iCountry=<country-code>
  Default: 1
  Purpose: Specifies the country code. This number matches
           the country's international telephone code,
           except for Canada, which is 2.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iCurrDigits=<number>
  Default: 2
  Purpose: Specifies the number of digits to put after the
           decimal separator in currency.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iCurrency=<number>
  Default: 0
  Purpose: Specifies a currency format according to the
           following:

             Value  Format
             -----  ------
               0    $2
               1    2$
               2    $ 2
               3    2 $

           The actual currency symbol is specified by the
           sCurrency value.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iDate=<number>
  Default: 0
  Purpose: Specifies a numerical date format according to
           the following:

             Value  Format
             -----  ------
               0    12/31/90
               1    31/12/90
               2    90/12/31

  The actual date divider is specified by the sShortDate
  value. This setting is not used by Windows 3.X
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iDigits=<number>
  Default: 2
  Purpose: Specifies the number of digits to display after
           the decimal separator in numbers.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iLZero=<0-or-1>
  Default: 0
  Purpose: Specifies whether to put leading zeros in decimal
           numbers according to the following:

             Value  Format
             -----  ------
               0    .7
               1    0.7

  The actual decimal separator is specified by the sDecimal
  setting.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iMeasure=<0-or-1>
  Default: 1
  Purpose: Specifies the measurement system according to the
           following:

             Value  System
             -----  ------
               0    metric
               1    English
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iNegCurr=<number>
  Default: 0
  Purpose: Specifies a negative number format according to
           the following:

             Value  Format
             -----  ------
               0    ($1)
               1    -$1
               2    $-1
               3    $1-
               4    (1$)
               5    -1$
               6    1-$
               7    1$-

           The actual currency symbol is specified by the
           sCurrency setting.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iTime=<number>
  Default: 0
  Purpose: Specifies whether to format time using a 12-hour
           clock or a 24-hour clock.

             Value  Format     Meaning
             -----  ------     -------
               0    1:00       12-hour clock
               1    13:00      24-hour clock

           The actual time separator is specified by the
           sTime setting.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
iTLZero=<number>
  Default: 0
  Purpose: Specifies whether to put leading zeros in time
           according to the following:

             Value  Format
             -----  ------
               0    9:15
               1    09:15

           The actual time separator is specified by the
           sTime setting.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
s1159=<string>
  Default: AM
  Purpose: Specifies the string that follows times before
           noon in the 12-hour time format.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
s2359=<string>
  Default: PM
  Purpose: Specifies the string that follows times after
           noon in the 12-hour format or that follows all
           times in the 24-hour format.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sCountry=<string>
  Default: United States
  Purpose: Specifies the name of the country whose standard
           setting you want to use.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sCurrency=<string>
  Default: $
  Purpose: Specifies the currency symbol you want to use.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sDecimal=<string>
  Default: .
  Purpose: Specifies the punctuation used to separate the
           fractional part of a decimal number from the
           whole number part.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sLanguage=<string>
  Default: usa
  Purpose: Specifies the language you want to work in.
           Windows applications that provide language-
           specific tasks, such as sorting or spell-
           checking, use this setting. The following are the
           standard values:

           Value    Language
           -----    --------
           dan      Danish
           dut      Dutch
           eng      International English
           fcf      French Canadian
           fin      Finnish
           frn      French
           ger      German
           ice      Icelandic
           itn      Italian
           nor      Norwegian
           por      Portuguese
           spa      Spanish
           swe      Swedish
           usa      U.S. English
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sList=<string>
  Default: ,
  Purpose: Specifies the character used to separate items in
           a list. In U.S. English, the most common separator
           is a comma.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sLongDate=<date-picture>
  Default: dddd, MMMM d, yyyy (e.g., Friday, June 1, 1990)
  Purpose: Specifies your choice for the long date format,
           including abbreviations for the words and
           different separators, according to the following:

             Date Picture      Item     Format
             ------------      -----    ------
             M                 Month    1-12
             MM                Month    01-12
             MMM               Month    Jan-Dec
             MMMM              Month    January-December
             d                 Day      1-31
             dd                Day      01-31
             ddd               Day      Mon-Sun
             dddd              Day      Monday-Sunday
             yy                Year     00-99
             yyyy              Year     1900-2040


           You should use Control Panel to change.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sShortDate=<date-picture>
  Default: M/d/yy (e.g., 6/1/90)
  Purpose: Specifies your choice for the short date format,
           including abbreviations for the words and
           different separators, according to the list
           described above in the sLongDate listing. Control
           Panel will accept only certain date-picture
           combinations. You should use Control Panel to
           change this setting.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sThousand=<string>
  Default: ,
  Purpose: Specifies the symbol used to separate thousands
           in a number with more than three digits. An
           example, if the value is a comma (,), is 3,000.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
sTime=<string>
  Default: :
  Purpose: Specifies the character used to separate the
           hours, minutes, and seconds in time. An example,
           if the value is a colon (:), is 15:29:31.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[PORTS] SECTION

The [ports] section lists all available communications and
printer ports, and defines default values; it also lists
files to which printer output can be sent.
The [ports] section can contain one or more occurrences of
the following setting:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
<portname>:=<baud-rate>,<parity>,<word-length>,<stop-bits>
              [[,p]]

  Purpose: Specifies an available output port.

           The <portname> keyname must be the name of an
           output port as it is recognized by MS-DOS. This
           keyname can be COMx: (communications port, where
           x represents the port number), LPTx: (a parallel
           port, where x represents the port number), EPT:
           (used for a specific IBM printer), LPTx.OS2 (a
           parallel port used with OS/2, where x represents
           the port number), FILE:, or a filename.
           For COM ports, the <baud-rate> value specifies
           the port's baud rate; the <word-length> value
           gives the length of a word (in bits); the
           <stop-bits> value gives the number of stop bits
           to be used; and the [[,p]] option specifies that
           hardware handshaking is in effect.

           LPT (parallel), EPT, FILE, and LPTx.OS2 ports do
           not take any parameters.
           The LPTx.OS2 ports are used (instead of the
           corresponding LPT port) when you are running
           Windows in the DOS compatibility box of OS/2.
           This port bypasses the Windows' special output
           handling.
           Specifying a filename for the <portname> will
           direct output to that file. A filename, unlike
           the other port names, must not be followed by a
           colon (:).

           By using FILE:=, Windows will prompt you to
           specify an output file at output time.
           You can specify no more than 10 ports.

To change COM port settings: Choose the Ports icon from
           the Control Panel.
To change or add other ports: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
LPT1.OS2=<pathname>
LPT2.OS2=<pathname>
LPT3.OS2=<pathname>
LPT4.OS2=<pathname>
  Default: none
  Purpose: Specifies the pathname of the printer you are
           using if you are using Windows in the DOS
           compatibility box of OS/2.
To change: Use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[FONTS] SECTION

The [fonts] section describes one or more display font files
that are loaded by Windows at start-up. The fonts section can
contain one or more occurrences of the following setting:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
<font-name>=<font-file>
  Purpose: Specifies a font file. The <font-name> keyname is
           the descriptive name of a font. The <font-file>
           value is the filename of a file that contains
           font resources.
To change: Choose the Fonts icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[PRINTERPORTS] SECTION

The [PrinterPorts] section lists the active and inactive
printers that can be accessed by Windows device drivers,
specifies the communications port or ports to which the
devices are connected, and specifies their corresponding
timeout values. The PrinterPorts section can contain one or
more occurrences of the following setting:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
<device-name>=<driver-name>,
               <port-name>,<DeviceNotSelectedTimeout>,
               <TransmissionRetryTimeout>
               [[,<port-name>,<DeviceNotSelectedTimeout>,
                 <TransmissionRetryTimeout>,...]]

  Purpose: Specifies an active or inactive printer.

           The <device-name> keyname is the name of the
           device. The <driver-name> value is the driver
           filename.

           After the <driver-name> value, there is a set of
           <port-name>, <TransmissionRetryTimeout>, and
           <DeviceNotSelectedTimeout> values for each port
           that has a printer of the specified type.
           If a device is not currently connected, the
           <port-name> value is the string specified in the
           NullPort setting (in the [windows] section).
           The <TransmissionRetryTimeout> value determines
           the amount of time (in seconds) allowed for
           attempted transmission retries.
           The <DeviceNotSelectedTimeout> value determines
           the number of seconds Print Manager will wait for
           the device to be switched on.
           If the timeout values are not specified for a
           particular port, Windows uses the default
           settings listed in the [windows] section for that
           port.

  CAUTION: When changing a setting in this section,
           be sure it does not conflict with a corresponding
           setting in the [devices] section. Problems may
           occur if a connected device does not appear in
           the [PrinterPorts] section.

To change: Choose the Printers icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[DEVICES] SECTION

The [devices] section names the active printers. The
settings in this section reflect those in the [PrinterPorts]
section, without the timeout values. This section is
necessary only for Windows version 2.x applications, which
look to the [devices] section for this information. The
devices section can contain one or more occurrences of
the following setting:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
<device-name>=<driver-name>, <port-name>
               [[,<port-name>,...]]

  Purpose: Specifies an active printer.

           The <device-name> keyname is the name of the
           device. The <driver-name> value is the driver
           filename. The <port-name> value specifies the
           port that the printer is connected to. If the
           printer is not currently connected, the <port-
           name> value is the string specified in the
           NullPort setting (in the [windows] section).

  CAUTION: When changing a setting in this section,
           be sure it does not conflict with a corresponding
           setting in the [PrinterPorts] section. Problems
           may occur if a connected device does not appear
           in the [PrinterPorts] section.

To change: Choose the Printers icon from the Control Panel.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
[COLORS] SECTION

The [colors] section defines the colors for components of
the Windows display. The colors section can contain settings
of the following type:
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
<component>=<red-value> <green-value> <blue-value>

  Purpose: The <red-value>, <green-value>, and <blue-value>
           values are integers that specify the relative
           intensities of red, blue, and green,
           respectively. These settings can range from 0
           (minimum intensity) to 255 (maximum intensity).

           The <component> keyname can be any one of the
           following:

           Keyname            Refers to
           ---------------    ------------------------------
           ActiveBorder       Border of the active window
           ActiveTitle        Active title bar
           AppWorkspace       Application workspace for
                              Windows applications
           Background         Screen background (desktop)
           ButtonFace         Button face
           ButtonShadow       Button shadow
           ButtonText         Button text
           GrayText           Text that is dimmed (as in an
                              unavailable command name)
           Hilight            Background of highlighted text
           HilightText        Highlighted text
           InactiveBorder     Border of the inactive window
           InactiveTitle      Inactive title bar
           Menu               Menu background
           MenuText           Menu text
           Scrollbar          Scroll bar
           TitleText          Title-bar text
           Window             Window workspace
           WindowFrame        Window frame
           WindowText         Window text

To change: For most of these settings, choose the Color
           icon from the Control Panel window. For
           ButtonFace, ButtonShadow, ButtonText, GrayText,
           Hilight and HilightText, use TWE to edit.
úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
ù
