Only for display cards 
	ASUS V3400TNT/TV & V3000/TV 
		with digital Video decode components
			(Enhanced Video Input Processor SAA7111A - EVIP).
 
 
WARNING!
  *  Don't use VLive with any other display card. Usually it results in complete 
     hang-up of the computer. 
  *  Make sure the most current version of DirectX is installed on your computer 
     (6.0 or above). 
  *  VLive does not operate in the 32bpp-screen mode with screen size more 
     800x600 (this limitation of V3400TNT display card). 
  *  If you have V3000 or you use non-Intel MMX compatible CPU please see section 
     "Additional configure parameters" 
  *  See section "Troubleshooting" first in case of problems 

FEATURES
  -  Automatic detection/set of an input signal source: Composite or S-Video 
  -  Automatic switching between following standards: 
         PAL BGHI, PAL N, PAL M 
         NTSC M, NTSC N, NTSC 4.43, NTSC-Japan 
         SECAM
  -  Detailed set-up of EVIP parameters for imaging quality improvement 
  -  Three high-speed video and audio capture modes with an option of compression 
  -  3D user interface 
  -  and more...

Video/audio compression available in capture modes can reduce the size of the 
output AVI-file considerably.

SHORTCUT KEYS

Keystroke		Actions
-------------------------------------------------------------------------
 ALT+X			Exit from VLive
 CTRL+S			Detection and set current video standard
 CTRL+E			Customizations of parameters of the EVIP
            
 ENTER
 Mouse double click	Shows/hide controls (brightness, contrast...)
 ADD
 CTRL+Z			Maximize/normalize window
 SUBTRACT		Minimize window
              
 UP			Select up-control
 DOWN			Select down-control
 LEFT			Increase current control value
 RIGHT			Decrease current control value
 PAGE UP		Speed decrease current control value
 PAGE DOWN		Speed increase current control value
              
 F7			Start capture mode
 ESC			Stop capture mode
 CTRL+C
 CTRL+INS		Copy of a current frame to the clipboard
 F5			Copy current frame to bitmap-file
 CTRL+O			Customizations of capture parameters and modes
    
If you drag the VLive window and "throw" it to one of the sides of the screen, 
the program window will "stick" to the boundary of the screen (some skill is 
required).

VIDEO&AUDIO CAPTURE

There are three video-capture modes:
  -  Turbo mode 
  -  Standard mode 
  -  Two-phase mode 
 
TURBO CAPTURE
    
It is the fastest capture mode. The output AVI-file is formed for one pass (i.e. 
the audio/video data is written immediately into the AVI-file in real time). 
Possible is the simultaneous capture of a sound. The mode actively uses internal 
features of display card, due to what it was possible to achieve startling 
productivity.
Particular advantage of this mode is that you can get captured frames of 
practically any size. The quality of the image is uniformly high (using hardware 
scaling with smoothing and anti-alias effects).
 
STANDARD CAPTURE

The creation of the AVI-file is carried out for one pass. The simultaneous 
capture of a sound, application of any video and sound compressors is possible.
The size of a frame is fixed. When video-compression is on the speed of 
processing drops dramatically. It is possible, that on computers with faster 
processor or fast compressors this mode can be useful.
 
TWO-PHASE CAPTURE

In this mode the creation of the output AVI-file is executed in two passes.
In the first pass the temporary file is created. Temporary file can be rather 
large. At the second stage the standard AVI-file (optionally - compression). 
Thus, please reserve enough disk space for these two files.
In the given version of the program in this mode the audio capture is 
impossible.
This mode is slightly slower than a turbo - mode (because of a format of 
video-data - RGB24 instead of RGB16). Nevertheless it is an unique mode in which 
it is possible to produce high quality video-compression. In a two-phase mode 
the speed of processing by the compressor of video-stream has no relevance.

TAKE NOTE: the capture mode set influences copying of separate frames into 
clipboard or into bitmap-files as well.


CAPTURE OPTIONS

Capture options dialog is accessible trough key combination CTRL+O.

  -  Capture mode ("Turbo mode", "Standard mode", "Two-phase mode") - current 
     capture mode 
  -  Capture audio - select to enable audio capture
  -  Vertical blanking synchronization - synchronization of the video-capture 
     buffer reading

Size of the captured video frames
  -  Frame size - width and height of the digitized frame in pixels 
  -  List - choice of significance from the list 
  -  Window size - to set width and height equal to a current size of the window. 
  -  User - direct input of width and height. 

Thread Priority - set priority capture task for two-phase capture.

Color mode - capture color format

Audio compression options - specify settings for Rate (the sample Rate for 
digitizing audio), Format (the bit depth of digitized audio), and Type (the 
compression method for digitized audio) 

Video compression options - specifies the codec (compressor/decompressor) 
and set options specific to the selected codec. 

Choices of abort of capture mode condition.
  -  Time limit - maximum time in seconds 
  -  Size Limit - maximum size in megabytes 
  -  Frames limit - maximum frames 

Capture file options:
  -  Capture file base name - AVI file name. VLive automatically will add next 
     following number to the name of the file if necessary. 
  -  Capture path - folder for AVI-files.
  -  Capture temporary path - folder used in two-phase capture. 
  -  Enable log - writes capture result statistics to log-file.

ADDITIONAL CONFIGURE PARAMETERS

Some parameters of the program can be changed only in the INI-file of the 
program (default VLive.ini).

Following parameters are defined:

Name		Value	Description
-------------------------------------------------------------------------
Model		0	V3000
		1	V3400TNT
MMX		0	None MMX support
		1	Enable MMX CPU support (only Intel MMX instructions supported)
D3RM		0	Disable 3D user interface (only registered version)
		1	Enable 3D user interface
Language		AutoAuto-detect interface language
		English	English interface language
		French	(currently not supported)
		German	(currently not supported)
		Italian	(currently not supported) 
		Russian	Russian interface language
StickyGap	###	Minimum split between an screen edge and window 
			boundary for "adhesion"
StayOnTop	0 
		1	Program window will be always on top of all other windows
MeshPathPath		Folder for 3D-interface modules
AutoScanVMode	###	NumberTime (in ms.) between detection attempts of 
	            	current video standard
		0	Disable this features
StoreParams	0	Prevents storing parameters of the program
BUGFlag		0 
		1	For old versions of display drivers
-------------------------------------------------------------------------
    
The program can be started with a parameter, which is the name of the 
configuration file. It allows starting VLive with various options.


KNOWN ISSUES

For various reasons some audio and video-compressors may not work or the 
AVI-file may be malformed. 

VLive does not support display cards with a built-in tuner, more precisely it 
does not support tuner control. 

There might be problems with simultaneous use of VLive and any other program 
utilizing DirectX ((close VLive and start again). 

Switching Windows screen modes when VLive is active might result in errors 
(close VLive and start again). 


TROUBLESHOOTING

Common problems

This section describes how to resolve common problems you may encounter while 
using VLive.

PROBLEM:
After start the program "hangs up" without any error message.
SOLUTION: 
Check up the current model of the display card in the configuration file of the 
program (Vlive.ini). Set an option value "Model" in 0 for V3000 and in 1 for 
V3400.
If all is correctly set, check the following requirements:
  -  The program is guaranteed to work only under Windows 98 
  -  Microsoft DirectX version 6.0 or above have to be installed 
  -  The program works only with ASUS V3000/TV and V3400/TV display cards 
  -  Set 16-bit display mode for screen resolution more than 800x600, (you can 
     set any screen resolution - 1024x768, 1152x864, 1280x1024, but display mode 
     should be 16bpp) 
  -  See problem with different drivers below 

PROBLEM (ONLY IN V3400):
After start of the program you observe the pink screen. Moving the program 
window you hear sounds.
SOLUTION: 
Update driver for your display card. The program is designed for version 2.00 or 
higher ASUS display driver or nVIDIA Detonator. If you can't or don't want to 
update of the driver set parameter value "BUGFlag" in the program configuration 
file (Vlive.ini) to 1. It slows program down noticeably.

PROBLEM:
In a turbo-capture mode (or in other capture modes) the program abnormal 
finishes or you receive error messages.
SOLUTION: 
Check up the current CPU type in the program configuration file (Vlive.ini). Set 
"MMX" parameters value to 1 if yours is Intel MMX-compatible CPU. In any other 
case, set this parameter value to 0.
If, despite of it, again there are errors, check up set-up parameters for audio 
and video of compression. The program is unable to work with some codecs because 
of their specifics.

NOTE: for a model ASUS V3000 a turbo-capture mode is not accessible.

PROBLEM (ONLY IN V3000):
The 3D-interface elements at window resizing do not function. 
SOLUTION: 
There is no solution. This problem is caused by shortage of a video memory V3000 
has. The partial solution consists of full deactivation of the 3D-interface. For 
this purpose in the program configuration file (Vlive.ini) set value "D3RM" to 0 
(available only in the registered version). In this case the program have to be 
controlled by the keyboard (see readme.txt for details).

PROBLEM:
It is impossible to understand purposes of parameters in the dialogue of set-up 
Enhanced Video Input Processor SAA7111A - EVIP.
SOLUTION: 
Overwhelming majority of parameters of this dialogue has very specific purpose, 
making sense only to an expert. Besides they require having good knowledge in 
the processing television signals area. The inclusion of all this information in 
VLive Help file is not planned. Try experimenting, it is completely safe for 
your display card and might bring some improvements. 
If you are interested at the details, you can get full description of SAA7111A 
chip on PHILIPS Company website. 


If you have not found solution for your problems here, write to the technical 
support by one of the addresses enclosed in readme.txt file

Please provide following information: 
  -  The detailed definition of a problem and condition it of appearance (start 
     of the program, capture video...) 
  -  The version of operational system (Windows95, 98, NT, ...) 
  -  The full name of the display card (for example, ASUS AGP V3400/TV 16 Mb 
     SGRAM) 
  -  Version number and manufacturer of drivers of your display card 
  -  Model and CPU speed 
  -  RAM size 



LICENSE FOR USE AND DISTRIBUTION

The Video Live is shareware.
This means:
  1. The author - Igor Lookin, exclusively owns all copyrights to VLive.
  2. Anyone may use this software during a test period of 30 days.
     Following this test period of 30 days or less, if you wish to continue
     to use VLive, you MUST register.
  3. The VLive unregistered shareware version may be freely distributed
     provided the distribution package is not modified. No person or
     company may charge a fee for the distribution of FAR without written
     permission from the copyright holder.
  4. Video Live IS DISTRIBUTED "AS IS".  NO WARRANTY OF ANY KIND IS EXPRESSED
     OR IMPLIED.  YOU USE AT YOUR OWN RISK.
     THE AUTHOR WILL NOT BE LIABLE FOR DATA LOSS, DAMAGES, LOSS OF
     PROFITS OR ANY OTHER KIND OF LOSS WHILE USING OR MISUSING THIS SOFTWARE.
  5. You may not use, copy, emulate, clone, rent, lease, sell, modify,
     decompile, disassemble, otherwise reverse engineer, or transfer the
     licensed program, or any subset of the licensed program, except as
     provided for in this agreement.  Any such unauthorized use shall
     result in immediate and automatic termination of this license and
     may result in criminal and/or civil prosecution.
     Igor Lookin reserves all rights not expressly granted here.
  6. Installing and using VLive signifies acceptance of these terms and
     conditions of the license.
  7. If you do not agree with the terms of this license
     you must remove VLive files from your storage devices
     and cease to use the product.


REGISTRATION
Registration of the program will allow you to sponsor further development of the 
following versions of the VLive for next generation display cards.

THE ORDER OF REGISTRATION
See Order.html

-------------------------------------------- 
ADDRESSES FOR CONTACTS
Lookin@ab.ru
http://www.ab.ru/~lookin
http:/www.geocities.com/Eureka/Park/6634
