======================================================================
   Microsoft(R) Product Support Services Application Note (Text File)
          WA0585: RUNNING MICROSOFT SCHEDULE+ FROM THE NETWORK
======================================================================
                                                   Revision Date: 2/93
                                                      No Disk Included

The following information applies to Microsoft Schedule+ for 
PC Networks, version 1.0.

 --------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an            |
| Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY      |
| KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO    |
| THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A     |
| PARTICULAR PURPOSE. The user assumes the entire risk as to the     |
| accuracy and the use of this Application Note. This Application    |
| Note may be copied and distributed subject to the following        |
| conditions: 1) All text must be copied without modification and    |
| all pages must be included; 2) If software is included, all files  |
| on the disk(s) must be copied without modification [the MS-DOS(R)  |
| utility DISKCOPY is appropriate for this purpose]; 3) All          |
| components of this Application Note must be distributed together;  |
| and 4) This Application Note may not be distributed for profit.    |
|                                                                    |
| Copyright 1993 Microsoft Corporation. All Rights Reserved.         |
| Microsoft and MS-DOS are registered trademarks and Windows         |
| is a trademark of Microsoft Corporation.                           |
| Novell is a registered trademark of Novell, Inc.                   |
 --------------------------------------------------------------------

INTRODUCTION
============

This application note is addressed to the network administrator and
outlines the procedure for setting up version 1.0 of Microsoft Schedule+
when Schedule+ is run from the network, and no Schedule+ files are stored
locally on the users' workstations. The first section tells how to set up
Schedule+ 1.0 when Microsoft Windows and Schedule+ are run entirely from
the network. The second section tells how to set up Schedule+ 1.0 when
Windows is run locally and Schedule+ 1.0 is run from the network.

    NOTE: Schedule+ version 1.0 was not designed to be run directly from
    the network. Because the file I/O that normally occurs on the local
    workstation is being handled by the network, running Schedule+ from
    the network may decrease Schedule+'s performance.
                                    
RUNNING WINDOWS AND SCHEDULE+ FROM THE NETWORK
==============================================
   
Definitions
-----------
   
    - <WINSHARE> refers to the shared location of the network
      installation of Windows.
    - <WINTEMP> refers to a temporary directory for a temporary
      installation of Windows.
    - <MYDIR> refers to the user's network directory where the user
      stores his or her own Windows files (this will include the *.INI
      and *.GRP files).
   
INSTALLATION STEPS
------------------

To set up the Schedule+ 1.0 shared files

1. Create the <WINTEMP> directory on the server or a local
   workstation, and run "setup /n" (without the quotation marks) from the
   <WINSHARE> directory to create a new installation of Windows in the
   <WINTEMP> directory.

2. Run Windows from <WINTEMP> Use the Windows File Manager to start Setup
   by double-clicking SETUP.EXE on the Schedule+ Program Setup Disk #2.
   During setup:

   a. Choose Custom Setup.
   
   b. When Setup prompts for the Schedule+ directory, type <WINSHARE>
      (without the brackets) as the location. For example, type
      "L:\WINDOWS" (without the quotation marks) if this is the location
      of the network version of Windows.
   
   c. When Setup asks if you want to install the Schedule+ Reminder
      program to load automatically, choose the No button.
   
   d. When Setup is complete and it asks if you want to Run Schedule+,
      Run Demos, or Exit To Windows, choose Exit To Windows.

   This process will install all the Schedule+ for Windows program files
   in the same directory as Windows and create a clean SCHDPLUS.INI file.

3. Set all files in <WINSHARE> to Read-Only. For Novell(R) networks, set
   the files to Shareable and Read-Only.

4. Copy SCHDPLUS.INI from <WINTEMP> to <WINSHARE>.

5. Remove <WINTEMP> (including all files and the directory).

To set up a user for Schedule+ 1.0

1. Copy SCHDPLUS.INI from <WINSHARE>to <MYDIR>.

2. In a group in the Windows Program Manager create a Microsoft Schedule+
   1.0 icon with the following properties:

      Description:       Microsoft Schedule+
      Command Line:      <WINSHARE>\SCHDPLUS.EXE
      Working Directory: <WINSHARE>
      Shortcut Key:      None
      Run Minimized      Not checked

3. Modify each user's WIN.INI file to include the following setting:

      [Sounds]
      SchdplusReminder=<WINSHARE>\MSREMIND.WAV,Schedule+ Reminders

4. If a user wants to be automatically reminded of scheduling messages,
   create an icon in the Startup group to start the file MSREMIND.EXE.

5. Verify that the <WINSHARE> directory is in the MS-DOS search path for
   each user.

RUNNING WINDOWS LOCALLY AND SCHEDULE+ FROM THE NETWORK
======================================================

Definitions
-----------
   
    - <WINDIR> refers to an individual user's locally installed Windows
      directory.
    - <SCHDPLUS> refers to the Microsoft Schedule+ directory on the
      network server.
   
INSTALLATION STEPS
------------------

To set up the Schedule+ 1.0 shared files and the first user

1. Run Windows from the first user's workstation. Use the Windows File
   Manager to start Setup by double-clicking SETUP.EXE on the Schedule+
   Program Setup Disk #2. During setup:

   a. Choose Custom Setup.
   
   b. When Setup prompts for the Schedule+ directory, type <SCHDPLUS>
      (without the brackets) as the location. For example, type
      "L:\SCHEDULE" (without the quotation marks) if this is the location
      of the network-shared copy of Schedule+.
   
   c. When Setup asks if you want to install the Schedule+ Reminder
      program to load automatically, choose the No button.
   
   d. When Setup is complete and it asks if you want to Run Schedule+,
      Run Demos, or Exit To Windows, choose Exit To Windows.

   This process will install all the Schedule+ program files and create a
   clean SCHDPLUS.INI file.

2. Copy the following files from the first user's workstation to
   <SCHDPLUS>:

      <WINDIR>\SCHDPLUS.INI
      <WINDIR>\WINHELP.EXE
      <WINDIR>\SYSTEM\SHELL.DLL
      <WINDIR>\SYSTEM\COMMDLG.DLL

      (Schedule+-specific DLL files:)

      <WINDIR>\SYSTEM\NVCONN.DLL
      <WINDIR>\SYSTEM\TRNSCHED.DLL
      <WINDIR>\SYSTEM\PABNSP.DLL
      <WINDIR>\SYSTEM\MAILMGR.DLL
      <WINDIR>\SYSTEM\MAILSPL.EXE
      <WINDIR>\SYSTEM\DEMILAYR.DLL
      <WINDIR>\SYSTEM\AB.DLL
      <WINDIR>\SYSTEM\STORE.DLL
      <WINDIR>\SYSTEM\FRAMEWRK.DLL
      <WINDIR>\SYSTEM\MSSFS.DLL
      
3. Remove all the above "Schedule+-specific DLL files" from
   <WINDIR>\SYSTEM.

To set up additional users for Schedule+ 1.0

1. Copy SCHDPLUS.INI from <SCHDPLUS> to <WINDIR>.

2. In a group in the Windows Program Manager create a Microsoft Schedule+
   1.0 icon with the following properties:

      Description:       Microsoft Schedule+
      Command Line:      <SCHDPLUS>\SCHDPLUS.EXE
      Working Directory: <SCHDPLUS>
      Shortcut Key:      None
      Run Minimized      Not checked

3. Modify each user's WIN.INI file to include the following setting:

      [Sounds]
      SchdplusReminder=<SCHDPLUS>\MSREMIND.WAV,Schedule+ Reminders

4. If a user wants to be automatically reminded of scheduling messages,
   create an icon in the Startup group to start the file MSREMIND.EXE.

5. Place the <SCHDPLUS> directory in the MS-DOS search path for each
   user.

    NOTE: If you are using Windows version 3.0, you must replace the
    following file in your <WINDIR> directory with the copy found in the
    <SCHDPLUS> directory for the Schedule+ Help to operate properly:

      WINHELP.EXE   Windows 3.1 Help engine
