HANDYMAN WALLPAPER HANGER 1.1 -- EVALUATION COPY
August 22, 1993

To most easily view this document, open it in Notepad and click
on the little "up" arrow in the upper right-hand corner to
maximize the window.


Contents:

1. Included Files

2. Important Notes

3. Installation

4. Un-Install

5. Legal Stuff

6. Shareware Vendor Guidelines


INCLUDED FILES

The following files are included in the evaluation
version of Handyman Wallpaper Hanger 1.1:

	cmdialog.vb_
	file_id.diz
	handy11.ex_
	handy11.hl_
	handy11.in_
	readme.txt (this file)
	setup.exe
	setup.lst
	setup1.ex_
	setupkit.dl_
	threed.vb_
	ver.dl_

A file which ends with an underscore (_) denotes a
compressed file which will be uncompressed by the setup
program.

If any files are missing, please notify the sysop of the
BBS from which you obtained the zipped file, or notify
Jim Shepherd on CompuServe (71664,2255), or Shepherd
Software at the address given at the end of this
document. Thanks


IMPORTANT NOTES

1. Feel free to upload Handyman Wallpaper Hanger 1.1 to your
   favorite BBS's (in fact, I hope you will). However, please
   be sure to include all the files listed above so that people
   who download Handyman can install it successfully and can
   use it to its fullest capabilities.

2. If you do upload Handyman, PLEASE DO NOT INCLUDE YOUR
   "HANDY11.INI" FILE. This file is unique to your preferences
   and may cause unsatisfactory results for someone else.
   The compressed file, HANDY11.IN_, contains the proper
   defaults for first time users and should be included
   in the zipped file you upload.

3. Handyman Wallpaper Hanger 1.1, and its setup program, require
   the file VBRUN300.DLL to be in your path or in your Windows
   "System" directory in order to run.

   Neither Handyman nor its setup program will work with
   VBRUN200.DLL or VBRUN100.DLL. You can obtain VBRUN300.DLL
   from the Windows Shareware Forum on CompuServe, most BBS's,
   or the shareware vendor from which you obtained Handyman.

4. Handyman requires versions of MicroSoft's CMDIALOG.VBX and
   THREED.VBX (both included with Handyman) with program dates of
   04/28/93 or later. Handyman will not work properly with earlier
   versions of those files.

   If the zipped file you downloaded does not contain CMDIALOG.VBX
   and THREED.VBX with program dates of 04/28/93 or later, please
   notify the sysop of the BBS where you obtained Handyman, and
   also notify Shepherd Software at the address given at the end
   of this document.

5. THE HANDYMAN INSTALLATION PROGRAM DOES NOT MAKE ANY CHANGES
   TO WIN.INI OR SYSTEM.INI, OR ANY OTHER FILES ON YOUR COMPUTER
   AND WILL NOT OVERWRITE ANY FILE WHICH HAS A NEWER DATE THAN THE
   ONE IT IS INSTALLING.

   When you use Handyman, all of the preferences you select in
   Handyman are saved in the "handy11.ini" file, which is stored
   in your Handyman directory.

6. If you want to get started right away, there's an item on
   Handyman's Help menu called "Getting Started" which will
   provide you with the minimum information necessary to begin
   using Handyman.

7. Handyman includes a feature called Magic Target Help
   which allows you to easily call up information and help
   on objects and menu items by clicking on them when Magic
   Target Help is turned on. A good way to familiarize yourself
   with Handyman is to turn on Magic Target Help and take a
   tour of Handyman's features.


INSTALLATION

During installation, Handyman's setup program will suggest a
directory for Handyman's files. You can accept the suggested
directory or type in a different one. If the directory does not
exist, the setup program will create it.

After installing Handyman, the setup program will automatically
create a program group called "Shepherd Software" and will install
Handyman's icon in it. If this offends you, simply move the
Handyman program icon to another group by dragging it to another
program group's open window and dropping it there. You can then
delete the Shepherd Software program group by single-clicking on it
to highlight it and then choosing Delete from Program Manager's
File menu.

HANDYMAN'S SETUP PROGRAM DOES NOT MAKE ANY CHANGES TO YOUR WIN.INI
OR SYSTEM.INI FILES. IT ALSO WILL NOT OVERWRITE ANY FILE WHICH HAS
A NEWER DATE THAN THE FILE IT IS INSTALLING.

To install Handyman from diskette, do the following:

NOTE: VBRUN300.DLL must be installed in your path or in your
      Windows "System" directory in order to use the setup program
      (and to run Handyman). 

1. Place the Handyman diskette in your A: or B: drive.

2. From Program Manager, choose Run... from the File menu.

3. In the box which appears, type "A:\setup" or B:\setup"
   (without the quotes).

4. Click OK or press ENTER.


To install Handyman from a zipped file, do the following:

NOTE: VBRUN300.DLL must be installed in your path or in your
      Windows "System" directory in order to use the setup program
      (and to run Handyman). 

1. Unzip HANDY11.ZIP.

2. From Program Manager, choose Run... from the File menu.

3. In the box which appears, type the complete path to Handyman's
   setup program. For example, if you unzipped HANDY11.ZIP in your
   "Download" directory on your C: drive, you would type
   "C:\DOWNLOAD\SETUP.EXE" (without the quotes).

4. Click OK or press ENTER.

5. Once Handyman has been successfully installed, you can delete all
   the files which were included in HANDY11.ZIP so long as you didn't
   install Handyman into the same directory that contains those files.
   In that case, delete ONLY the following files:

	cmdialog.vb_
	file_id.diz
	handy11.ex_
	handy11.hl_
	handy11.in_
	setup.exe
	setup.lst
	setup1.ex_
	setupkit.dl_
	threed.vb_
	ver.dl_

   Be sure to leave handy11.exe, handy11.ini, handy11.hlp, and
   readme.txt in your Handyman directory.


UN-INSTALL

I hope you will like using Handyman, but if you decide to
remove it from your computer, do the following:

1. Delete all the files from your Handyman directory.

2. Remove (delete) your Handyman directory.

3. You may want to delete the following files which were installed
   in your Windows "System" directory by Handyman's setup program:

	cmdialog.vbx
	threed.vbx

 **HOWEVER, DO NOT DELETE THESE .VBX FILES if you have MicroSoft
   Visual Basic (any version), Standard or Professional editions
   since you need these files for yourself. Also, do not delete
   these files if they are needed by another Visual Basic
   application. You also should not delete VBRUN300.DLL since you
   will need that file in order to run other Visual Basic
   applications. I know this is all probably self-evident but
   it's easy to make mistakes in the heat of the moment.

4. Remove the Handyman program icon by single-clicking on it to
   highlight it and then choosing Delete from Program Manager's
   File menu.

5. If your Shepherd Software program group is now empty, you can
   remove (delete) it by single-clicking on it to highlight it and
   then choosing Delete from Program Manager's File menu.


LEGAL STUFF

Handyman Wallpaper Hanger 1.1 and related files, including the
help file, are Copyright  1993 by James Shepherd/Shepherd Software.
All rights reserved.

This is the evaluation version of Handyman. It is
distributed as shareware for a 30 day evaluation period.
You agree by using this product to either register it
within 30 days of receipt, or to discontinue using it.
Continued use without registration is a violation of
Shepherd Software's copyright.

Shepherd Software makes no warranty of any kind with regard
to this software or documentation, including, but not limited
to, any implied warranties of merchantability and fitness
for a particular purpose. Shepherd Software shall not be
liable for errors or for incidental or consequential damages
in connection with the furnishing, performance, or use of
this product. The software and the information contained in
the documentation are subject to change without notice.


SHAREWARE VENDOR GUIDELINES

Handyman Wallpaper Hanger 1.1 may be distributed as shareware
by Association of Shareware Professionals (ASP) approved
shareware vendors, provided the shareware vendor follows ASP
guidelines regarding the distribution of shareware products.

A shareware vendor not approved by ASP must contact
Jim Shepherd/Shepherd Software prior to distribution for
permission to distribute Handyman Wallpaper Hanger 1.1.
Jim Shepherd/Shepherd Software can be contacted either by
e-mail on CompuServe (71664,2255), or by U.S. Postal Mail
at the following address:

	Shepherd Software
	6984 McKinley St.
	Sebastopol, Ca. 95472
