(* KnowledgePro help file January 18, 1988 *)
/Using the Function Keys
Press F1 again for more help or SPACE to exit

The available function keys appear at the
bottom of the screen. They are :

F1 - Help. Press F1 again for more help.
F2 - Change the default directory.
F3 - Select - move the cursor among the
     hypertext concepts.
F4 - View -  display hypertext for the
     concept under the cursor.     ... pg down
F5 - Evaluate - enter commands in an edit
     window while an application is running.
     Press ESC to execute the commands. This
     key may be disabled in some knowledge
     bases.
F6 - Debug - displays a menu of the topics
     contained in the knowledge base.
     entered. This key may be disabled in
     some knowledge bases.
F7 - Calls the KnowledgePro editor. This key
     may be disabled in some knowledge bases.
                                    ...pg down
F8 - DOS - Enter a DOS command. Type "exit"
     to return to KnowledgePro.

F10 - Quit - Quit the current application or,
     if not inside an application, quit
     KnowledgePro.

These keys may also be selected by moving the
mouse cursor over the key in the message
window and clicking either button.

/Select a Knowledge Base
Press F1 again for more help or SPACE to exit

All knowledge bases in the current directory
with a suffix of .KB or .CKB are shown on the
opening menu.
- To select from the menu move the cursor
  using the cursor control keys or select the
  first letter of the knowledge base then
  press <ENTER>. If you have a mouse you can
  point and click to select a knowledge base.
                                   ...pg down

- To enter the name of a knowledge base not
  on the menu press <SPACE> then type in the
  full file name (including path and drive).

/Answer a question
Press F1 again for more help or SPACE to exit

There are three different ways you can
provide information to a knowledge base :
 1] select from a pop-up menu
 2] type a one line response
 3] enter text in an editor window.
To select from the menu move the cursor using
the cursor control keys or select the first
letter of the answer then press <ENTER>
                                    ...pg down
When you're asked to select more than one menu
item, move the cursor to each menu item and
press <INS> or press the right mouse button.
A small diamond will appear to the left of the
item to indicate that it has been selected.
Reselecting a selected item will remove the
diamond.  Press <ENTER> or the left mouse
button when all items are selected. The item
under the cursor is always selected when the
<Enter> key or left mouse button is pressed.

                                    ...pg down

To enter a response to the => prompt type the
response at the prompt and press <Enter>

When a pop-up window appears, you will have a
full text editor to allow you to type in your
response.  For more information on the text
editor, press F1 for more help and then select
"Editor" from the pop-up menu.

/Display a message
Press F1 again for more help or SPACE to exit

When you're finished reading a message, press
<SPACE> to continue or, with a mouse, point and
click on the word "Space" at the bottom of the
screen. When a message is more than one page
long, use PgUp and PgDn to scroll through it.

/Highlighted Text - Hypertext
Press F1 again for more help or SPACE to exit

As messages are displayed some areas of text
may be highlighted or underlined. There
highlighted concepts are "threaded" to more
information about the concepts.  To display the
threaded text, move the menu bar to the
highlighted concept you want to select using F3
or the mouse. Press F4 or the mouse button to
view the thread.

/Using a mouse
Press F1 again for more help or SPACE to exit

To select from a menu, point to the item and
click the left button.  To select more than one
item, point to each item and press the right
button.  Each selected item will be marked with
a diamond.  When the last item has been marked,
click the left button.  The item under the
cursor is always selected.  To remove a
diamond, reselect the item with the right
button.                             ...pg down
To select a hypertext thread point to the
hypertext concept and click either button.

To select a command from the message window
point to the command and press either button.

To page through messages or menus longer than
one page, point at the Pg_of_ message in the
lower right of the screen and click the left
button to page forward and the right button to
page back. The mouse can also be used in the
editor. (See editor help).
/Editor
Press F1 again for more help or SPACE to exit

To call the editor, press the F7 key. This
key may be disabled in some knowledge bases.
The editor uses many of the same commands as
WordStar and the Turbo Pascal Editor.  To
leave the editor press ESC.  You will be
asked if you want to save your file.

Available Editor commands are:
                                    ...pg down
   Moving the cursor
<-        or  ^D   Character left
->        or  ^S   Character right
^<-       or  ^A   Word Left
^->       or  ^F   Word Right
TAB       or  ^I   Tab
UP ARROW  or  ^E   Line Up
DN ARROW  or  ^X   Line Down
^W                 Scroll Up
^Z                 Scroll Down
PgUp      or  ^R   Page Up
                                    ...pg down
PgDn      or  ^C   Page Down
HOME      or  ^QS  Beginning of a line
END       or  ^QD  End of a line
^HOME     or  ^QE  Beginning of a page
^END      or  ^QX  End of a page
^PgDn     or  ^QR  Beginning of the file
^PgUp     or  ^QC  End of the file
^QB                Mark beginning of block
^QK                Mark end of block


                                    ...pg down
   Deleting and Inserting Text
^G   Delete character under the cursor
^H   Delete character to left of cursor
^T   Delete next word
^Y   Delete a line
^QY  Delete to the end of a line
^KY  Delete a marked block
^V   Insert on/off
^N   Insert a line


                                    ...pg down
     Block commands
^KS  Save the file
^KB  Mark beginning of block
^KK  Mark end of a block
^KH  Hide/display a block
^KC  Copy a block
^KV  Move a block
^KY  Delete a block
^KR  Read a block from a file
^KW  Write a block to a file
^KP  Print a block or entire
     file if no mark                ...pg down
   Formatting commands
^B   Reformat paragraph
^OR  Set the right margin
^QI  Toggle autoindent mode
^QW  Toggle word wrap

   Find and Replace commands
^QA  Find and replace a string
^QF  Find an occurrence of a string
^L   Find the next occurrence

                                    ...pg down
   Leaving the editor
ESC  Leave the editor - You will be asked if
     you want to save your file.
The mouse can also be used in the editor. Press
the right button while the mouse cursor is in
the editor window to bring up a pop-up menu of
all the editor commands. Select a command by
pressing the left button. To move the text
cursor, point to the desired location and click
the left button. To scroll the edit
window in any direction, point at the border
and click either button.
/Find and Replace
Enter a string to be found in the file. If
you are replacing text, you will be prompted
for a the replacement text. You will also be
prompted for options. Valid options are:

B  - Search backwards from the current cursor
     position
G  - Global replacement
n  - number. Find the nth occurrence of the
     search string
                                    ..pg down
N  - Replace without asking
U  - Ignore case when searching for text.
W  - search for whole words only.

Multiple options can be specified.
WordStar is a trademark of MicroPro Int'l
Turbo Pascal is a trademark of Borland Int'l

/Save a Knowledge Base
Press F1 again for more help or SPACE to exit

Press <ENTER> to save or <ESC> to avoid
saving the knowledge base.

/Display the Knowledge Base
Press F1 again for more help or SPACE to exit

When F6 is pressed, the topics contained in
the knowledge base are displayed in a pop-up
menu. The hierarchy of the topics is
indicated by the indentation level. When a
topic is selected from the menu, its values,
properties and the commands inside it are
displayed.

/Syntax error
Press F1 again for more help or SPACE to exit

An error has occured during compilation.
Press F7 to display the line in error. Often
it's the line above that's at fault.

/Runtime error
Press F1 again for more help or SPACE to exit

An error has occurred while running a
knowledge base. Press F10 to abort.

/Garbage Collection
Press F1 again for more help or SPACE to exit

The "Collecting Memory" message means that
KnowledgePro is reclaiming memory that has
become inaccessible. If this happens
frequently try removing resident programs.
/

