                  FUJITSU 364A (ST, LT, FX, DX, and XL)

                NAM Type:  EEPROM
            Manufacturer:  Fujitsu
              Programmer:  Handset
          ESN Prefix DEC:  133
                     HEX:  85
 ESN, S/N Match Required:  Yes
    Programmable Handset:  Yes
      Available Channels:  832
    Programming Sequence:  Power On
                           F + LOCK
                           Power Off
                           Power On
                           # + 626 + # + 7764726 (within 10 seconds)
                           Hold * key until tone stops
                           Enter data for each step then press STOR
                           Vol UP or DN arrows can be used to scroll
                           Press SEND to write data

                       # of digits
        System ID Format:  5    XXXXX
        Local Use Option:  1    1
              Min Option:  1    1
           Mobile Number:  10   XXX-XXX-XXXX
           Station Class:  2    08 (mobile) 14 (portable)
  Initial Paging Channel:  3    333 or 334
   Access Overload Class:  2    XX
        Preferred System:  1    1 (A) or 0 (B)
         Group ID Format:  2    XX
             Unlock Code:  3 or 4
              Call Timer:  1    4
        Call Restriction:  1    1
     System ID Inhibit #:  5    XXXXX
     System ID Inhibit #:  5    XXXXX
     System ID Inhibit #:  5    XXXXX

Call Timer Increment - 1  Timer Off
                       2  6-seconds
                       3  30-seconds
                       4  60-seconds

Auto Lock - 1  Manual Lock, no out
            2  Manual Lock, no calls
            3  Auto Lock, no out
            4  Auto Lock, no calls

Call Restriction - 1  No restriction
                   2  No memory dialing
                   3  No long-distance
                   4  Both 2 and 3
                   5  Memory calls only

Programming Instructions NAMs 2 thru 4:  Power On
                                         Unlock phone (if locked)
                                         F + 7 + (NAM 2, 3, or 4)
                                         F + LOCK
                                         Power Off
                                         Power On
                                         Follow programming code from above

              Horn alert:  F + #
         New Unlock Code:  NAM
           System Select:  F + 1 + X
                            X=1  AB Pref A
                            X=2  BA Pref B
                            X=3  A only
                            X=4  B only
                            X=5  Home

To confirm setting, press RECL + F + X
