Ref: 02360003   
Title: Importing EtherLink 16 Drivers into LAN Manager 2.x
Date: 12/6/91

Copyright 3Com Corporation, 1991.  All rights reserved.

In Microsoft LAN Manager versions 2.0 and later, the EtherLink 16 adapter 
is not listed as an option in the adapter install menu.  To install the 
EtherLink 16 in an existing LAN Manager 2.x system, follow these steps:

1.  Follow the standard MS LAN Manager (version 2.0 or later) installation 
procedure that appears on your screen.

2.  Select <Actions>, then select <Import network drivers>.

3.  Follow the request prompt, insert the EtherDisk diskette, and 
select "3Com EtherLink 16 and EtherLink 16 TP".

4.  Continue with the MS LAN Manager installation procedure.  At the 
"Select Network Hardware and Software" screen, select "3Com EtherLink 16 
and EtherLink 16 TP", and choose the "Add Driver" box.

5.  Follow the MS LAN Manager installation procedure until the installation 
is complete.

Note:  If you have the PREDITOR utility on your computer system, you can
invoke the PREDITOR program after completing the SETUP based portion
of the installation to select the adapter and to bind to a protocol.

