UNIDEN CP 4600/5600 RADIO SHACK 170-1067/170-1056 Programming: ESN # - To determine the correct ESN number for Uniden phones: Add "172" to the serial number that is located on the side of the box (on the bar code) CP 4600/5600 PROGRAMMING Step 1 - Press and hold down the (PWR) key to turn the unit on. Step 2 - Then press and hold down the (*) and (#) keys simultaneously, continue to hold until the display lights up. Step 3 - Release the (*) and (#) keys and enter the secret code: 3 2 2 1 8 5 9 1 You have approximately 10 seconds to enter the code correctly before the phone returns to normal mode. Step 4 - If you have entered the code correctly, you will see the following on your screen: ÚÄÄÄÄÄÄÄÄÄÄ¿ ³ TESTMODE ³ ³ SELECT ³ ÀÄÄÄÄÄÄÄÄÄÄÙ If something was done incorrectly, you will return to normal mode. Step 5 - Press the number two to enter into NAM programming. You will see the following on your screen. ÚÄÄÄÄÄÄÄÄÄÄ¿ ³ NAM> ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÙ Step 6 - Press a number between 1 - 4 to indicate which NAM you will be programming. Once you have indicated which NAM to program you will see the following screen: ÚÄÄÄÄÄÄÄÄÄÄ¿ ³ ITEM> ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÙ Step 7 - Enter the item number that you wish to program from the table below. Step 8 - Press STO after entering the correct information for that item. Step 9 - You will see the following screen again. ÚÄÄÄÄÄÄÄÄÄÄ¿ ³ ITEM> ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÙ Step 10 - Repeat steps 7 - 9 until all items have been programmed. Step 11 - Press SEND to write the information. The display will read: ÚÄÄÄÄÄÄÄÄÄÄ¿ ³ NAM WR ³ ³ -PASS- ³ ÀÄÄÄÄÄÄÄÄÄÄÙ Step 12 - Press END to return to normal mode. ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ITEM³ DESCRIPTION ³ VALID DATA ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 0 ³Home System Identification (SID) ³5 Digits (00000 through 32767) ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 1 ³Local Use Mark (LU) tells the ³1 Digit (0 or 1) ³ ³ ³mobile if it must be preregistered ³ ³ ³ ³with the system. ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 2 ³Access Method (MIN MARK) Designates³1 Digit (0 or 1) ³ ³ ³whether an area code is always to ³ ³ ³ ³be sent when making a call. ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 3 ³Mobile Identification Number (MIN) ³10 Digits ³ ³ ³Area Code plus the phone number ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 4 ³Initial Paging Channel (IPCH) ³4 Digits (0333 for the "A" ³ ³ ³ ³System or 0334 for the "B") ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 5 ³Access Overload Class (ACCOLO) ³2 Digits (00 through 15) ³ ³ ³The intention of this entry is to ³ ³ ³ ³allow the cellular system to be ³ ³ ³ ³able to determine priority in the ³ ³ ³ ³event of a system overload. ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 6 ³Preferred System Mark (PS) should ³1 Digit (0 for "B" or 1 for "A"³ ³ ³identify with the initial paging ³ ³ ³ ³channel. ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 7 ³Group Identification Mark (GIM). ³2 Digits ³ ³ ³The GIM is a 4 Bit number ³ ³ ³ ³indicating how many Bits of the ³ ³ ³ ³SID starting with the most ³ ³ ³ ³significant digit will be sent. ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 8 ³Lock Mode ³4 Digits (0000 through 9999) ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 9 ³DTMF Duration ³1 Digit (0 for 100 MSEC or 1 ³ ³ ³ ³for End to End) ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ