STEP 1 to Enter Progam Mode: Type: *3001#1234500 Phone Responds: STORE NOT DONE STEP 2 to Program the User's Phone Number: Press: 0 2 Phone Responds: 1111111111 (or previously programmed #) Press and HOLD: until display is empty Type: cellular phone number and 02 Phone Responds: REPLACE CONTENTS? For example: 8173905555 02 Press: Phone Responds: STORED STEP 3 to Enter Carrier Parameters: Type: 0 3 Phone Responds: 38*1*1*334*15*15 (or previously programmed parameters) Press and HOLD: until display is empty Type: cellular phone paramemters and 03, on the CT-352, add the Long Distance and International Code. For the CT-350/351: 00038*1*1*334*05*10 03 ³ ³ ³ ³ Home or System ÄÄÄÄÄÄÄÙ 333 for A ³ ÀÄÄÄ-Group ID 334 for B ³ Channel ³ ÀÄ-0 and Last Digit of Phone # For the CT-352: 00038*1*1*334*05*10#0111*1 03 ³ ³ ³ ³ ³ Home or System ÄÄÄÄÙ 333 for A ³ ³ ÀÄÄÄÄÄÄÄInternat Code 334 for B ³ ÀÄÄÄÄ-Group ID Channel ³ ÀÄ-0 and Last Digit of Phone # Phone Responds: REPLACE CONTENTS? Press: STEP 4 to Enter Lock/Security Code Parameters Type: 01 Phone May Respond: 911#*911#0*1234 Press and HOLD: until display is empty Type: 911#*911#0* Type (for the CT-350): 4 digit lock code (1234 is the default) Type (for the CT-351/352): 5 digit security code (12345 is the default) Note: The 0 in this section denotes "ENGLISH" language selection. Replace with a "1" for Spanish, a "2" for French. Type: 01 Phone Responds: REPLACE CONTENTS? Press: You are DONE. The phone must be turned off and then on again before it will recognize the new parameters. Always wait at least two hours after receiving the cellular phone number from the carrier before testing the phone. Settings List: 0 Lock Phone 1 Change Carrier Priority (A/B) 2 Display Last # Dialed 3 Call Timers 4 Turn ON/OFF Display Light 5 Enable/Disable Key Tone 6 Ring Volume 7 Primary/Secondary NAM select 8 Send DTMF Tones (PN/jej-04/07/95)