------------------------------------------------------------------------------- PANASONIC CM/TF 800 (EB2502/EB2503, EBC20/EBC30) ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: PANASONIC Programmer: Keypad ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Requires Conversion (See Conversion Instructions) Stamped Mode Number: EB-2502 or EB-2503 Number of Channels: 832 Programming Sequence: Install fully charge battery Power On Enter Maintenance Mode: * + 0 + # + 0 + * + 0 + # + 0 Enter * + 1 + SND (to program NAM 1) or * + 2 + SND (to program NAM 2) NAM 1 must be programmed before NAM 2 can be programmed. When programming NAM 2 only use steps 01-06 The sequence * + 0 + # + 0 + * + 0 + # + 0 + 1 must be entered within 10 seconds of power up Enter parameter information + STO and then the Step Numnber (i.e., to program System ID, XXXXX + STO + 01) To recal any information already programmed into phone, press RCL + Step Number Press STO + * + * to write NAM information Press END or * + 4 to exit Maintenance Mode Step # of Digits 01 System ID: 5 XXXXX 02 Mobile Number: 10 XXX-XXX-XXXX 03 Preferred System: 1 0(B) ot 1(A) 04 Initial Page Channel: 3 333 or 334 05 Access Overload: 2 XX 06 Group ID: 2 XX 07 Digit Dial Limit: 2 00=32 digits 08 Station Class: 2 XX 09 Speed Dial Number: 12 XXXXXXXXXXXX 10 Lock Code: 2-4 XX, XXX or XXXX 11 Option Bits (FCN 1)(1): 8 1100-0000 12 Option Bits (FCN 2)(2): 8 0001-0100 13 Option Bits (FCN 3)(3): 8 1111-0111 (1) Step 11: Local MIN Not Not Horn Radio Not (0=Disabled) Use Opt Used Used Alert Mute Used (1=Enabled) (2) Step 12: Not Built-in Auto Full Not A/B Pref Home (0=Disabled)Used Monitor Lock Lock Used Select Only Only (1=Enabled) (3) Step 13: Call in DTMF Not Dial Not Cumulative Resettable Indiv (0=65 ms) Absence Interval Used Lock Used Timer Timer Timer (1=Continuous) Conversion of EB-2502 and EB-2503 serial number to ESN (for serial numbers over 1,000,000) (Last 6 digits of stamped Serial Number) + [(7th digit) (262,144)]=ESN without prefix Example #1: Serial Number on phone is 1,234,567 234,567 + [(1)(262,144)] = (496,711) This phone's ESN is 13600496711 Example #2: Serial Number on phone is 3,234,567 234,567 + [(3)(262,144)]=(1,020,999) This phone's ESN is 13601020999 Display ESN: Install Test Cable (Part #WWG18965BA) Enter Maintenance Mode: * + 0 + 0 + 0 + 0 + 0 + # Press * + 3 + SND Enter 1 + 1 + SND ESN will display in decimal. Since the display shows 10 digits maximun, first digit of the prefix (136) is hidden) New Unlock Code: NAM Multiple NAM Select: F + 8 System Select: F + 7 + X X=1 Standard (AB or BA) X=2 A Only X=3 B Only X=4 Home ------------------------------------------------------------------------------- PANASONIC EB-500, CM-500, TP-500, EB-T10, EB-C10 ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: PANASONIC Programmer: Handset with PANASONIC programming adaptor (WWG1865BA) ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Yes, requires conversion if serial number is over 1,000,000 (See Conversion bellow) Handset Programmable: Yes, with adaptor Number of Channels: 832 Programming Sequence: Connect programming adaptor to transceiver and 12 volts power supply Connect handset directly to transceiver Enter the following code: * + 0 + 0 + 0 + 0 + # (to enter maintenance mode) * + 1 + SND (to program NAM #1) or * + 2 + SND (to program NAM #2) NAM #1 must be programmed before NAM 2 can be input "In Use" and "No Svc" will illuminate if improper data has been input Enter individual data then press STO and the correct 2 digit location Press STO + * + * to program NAM (Press NAM to exit) % Program NAM 1 % Step # of Digits 01 System ID: 5 XXXXX 02 Mobile Numer: 10 XXX-XXX-XXXX 03 Preferred System: 1 0 (B) or 1 (A) 04 Initial Paging Channel: 3 333 or 334 05 Access Overload: 2 XX 06 Group ID: 2 XX 07 Dialed Digit Limit (00 for 32, 29 for 29, 28 for 28): 2 00 08 Station Class: 2 08 09 Frequently Dialed Number for Location: 10 XXX-XXX-XXX 10 Lock Code: 2-4 XX, XXX or XXXX 11 Options (1): 8 11000XX0 12 Options (2): 8 0XX101XX 13 Options (3): 8 11010111 (1) Step 11 - Options [0=Disabled, 1=Enabled] Local MIN Not Not Not Horn Radio Not Use Opt Used Used Used Alert Mute Used (2) Step 12 - Options [0=Disabled, 1=Enabled] Not Built-in Auto Full Not A/B Pref Home Used Monitor Lock Lock Used Select Only Only (3) Step 13 - Options [0=65 milliseconds, 1=Continuous] Call in DTMF Not Dial Not Cumulative Resettable Indiv Absence Interval Used Lock Used Timer Timer Timer % Programming NAM 2 % Step # of Digits 01 System ID 2: 10 XXX-XXX-XXXX 02 Mobile Number 2: 5 XXXXX 03 Preferred System 2: 1 0 (B) or 1 (A) 04 Initial Paging Channel: 3 333 or 334 05 Access Overload 2: 2 XX 06 Group ID 2: 2 XX The following two command sequences cause phone to exit maintenance mode. STO + * + * (To store programmed information) STO + # + # (No programmed information will be saved) % Coversion of EB-500 serial number to ESN % [for serial numbers 1,000,000 to 1,999,999] (Stamped Serial Number)-(1,000,000) + (262,144) = ESN without prefix Example: Serial Number is 1,234,567 (1,234,567) - (1,000,000) + (262,144) = (496,711) The phone's ESN is 13600496711 % For serial numbers 2,000,000 to 2,999,999 % (Stamped Serial Number) - (2,000,000) + (524,288) = ESN without prefix % For serial numbers 3,000,000 to 3,999,999 % (Stamped Serial Number) - (3,000,000) + (786,432) = ESN without prefix Display ESN: Insert Program Adaptor Enter Maitenance Mode: * + 0 + 0 + 0 + 0 + # Press * + 3 + SND Enter 1 + 1 + SND ESN will display in decimal. Since the display shows 10 digits maximum, first digit of the prefix (136) is hidden. Press CHK to see the missing "1" Horn Alert: F + 4 + 2 New Unlock Code: NAM System Select: F + 7 + X X=1 AB or BA Standard X=2 A Only X=3 B Only X=4 Home % Conversion of EB-500 serial number to ESN % [For serial numbers 1,000,000 to 1,999,999] (Stamped Serial Number) - (1,000,000) + (262,144) = ESN without prefix Example: Serial Number is 1,234,567 (1,234,567) = (1,000,000) + (262,144) = (496,711) This phone's ESN is 13600496711 % For serial numbers 2,000,000 to 2,999,999 % (Stamped Serial Number) - (2,000,000) + (524,288) = ESN without prefix % For serial numbers 3,000,000 to 3,999,999 % (Stamped Serial Number) - (3,000,000) + (786,432) = ESN without prefix Display ESN: Insert Program Adaptor Enter Maintenance Mode: * + 0 + 0 + 0 + 0 + # Press * + 3 + SND Enter 1 + 1 + SND ESN will display in decimal. Since the display shows 10 digits maximin, first digit of the prefix (136) is hidden. Press CHK to see the missing "1" Horn Alert: F + 42 New Unlock Code: NAM System Select: F + 7 + X X=1 AB or BA Standard X=2 A Only X=3 B Only X=4 Home ------------------------------------------------------------------------------- PANASONIC EB 3500 Portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: PANASONIC Programmer: Keypad with PANASONIC adaptor (Part #WWG1036A) ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Requires Conversion (See Conversion) Handset Programmable: Yes, provided programming adaptor is availabe Number of Channels: 832 Programming Sequence: Install fully charged battery and programming adaptor Power On Enter Maintenance Mode: * + 0 + 0 + 0 + 0 + # Enter * + 1 + SND (to program NAM 1) or * + 2 + SND (to program NAM 2) NAM 1 must be programmed before NAM 2 can be programmed. When programming NAM 2 only use steps (01-06) Enter parameter information + STO and then the Step # (i.e., to program System ID, XXXXX + STO + 01) To recall any information already programmed into phone, press RCL + Step Number Press STO + * + * to write NAM information Press STO + * + 4 to exit Maintenance mode Step # of Digits 01 System ID: 5 XXXXX 02 Mobile Number: 10 XXX-XXX-XXXX 03 Preferred System: 1 0(B) or 1(A) 04 Initial Page Channel: 3 333 or 334 05 Access Overload: 2 XX 06 Group ID: 2 XX 07 Digital Dial Limit: 2 00=32 digits. 08 Station Class: 2 XX 09 Speed Dial Number: 12 XXXXXXXXXXXX 10 Lock Code: 2-4 XX, XXX or XXXX 11 Options (FCN 1)(1): 8 1101X000 12 Options (FCN 2)(2): 8 0XXX0XXX 13 Options (FCN 3)(3): 8 XXXX0111 Step 11: Local MIN Not End-to Ringer Not Not Not Use Opt Used End Silence Used Used Used Step 12: Built-In Not Monitor Auto Full Not A/B Pref Home Used Svc Only Lock Lock Used Select Only Only Step 13: Call in DTMF Send Dial Not Cumulative Resettable Indiv Absence Interval Lock Lock Used Timer Timer Timer % Conversion of EB-3500 serial number to ESN % [For serial numbers 1,000,000 to 1,999,999] (Stamped Serial Number) - (1,000,000) + (262,144) = ESN without prefix Example: Serial Number is 1,234,567 (1,234,567) = (1,000,000) + (262,144) = (496,711) This phone's ESN is 13600496711 % For serial numbers 2,000,000 to 2,999,999 % (Stamped Serial Number) - (2,000,000) + (524,288) = ESN without prefix % For serial numbers 3,000,000 to 3,999,999 % (Stamped Serial Number) - (3,000,000) + (786,432) = ESN without prefix Display ESN: Insert Program Adaptor Enter Maintenance Mode: * + 0 + 0 + 0 + 0 + # Press * + 3 + SND Enter 1 + 1 + SND ESN will display in decimal. Since the display shows 10 digits maximin, first digit of the prefix (136) is hidden. Press CHK to see the missing "1" New Unlock Code: NAM Multiple NAM Select: F + 8 System Select: F + 7 + X X=1 Standard AB or BA X=2 A Only X=3 B Only X=4 Home ------------------------------------------------------------------------------- PANASONIC HP600 (EB-3510), EBH-30 (EB-3511) Portables ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: PANASONIC Programmer: Keypad with PANASONIC adaptor (Part #EB-X0754) ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Requires Conversion (See Conversion) Handset Programmable: Yes, provided programming adaptor is available or phone was manufactured after March 1, 1991. Number of Channels: 832 Determine Phone's manufacturer date by checking the lable on the back of portable. The lable shows 3 letters. The first letter is the year (A=91,B=92, etc). The second letter shows the month (A=January, B=February, etc) and the third letter displays the manufacturer bach. A phone with label ACX was manufactured in March 1991 Programming Sequence: Install fully charged battery and programing adaptor if necessary. Power On Pre 3/91 Models: Enter Maintenance Mode: * + 0 + 0 + 0 + 0 + # Post 3/91 Models: Enter Maintenance Mode: * + 0 + # + 0 + * + 0 # of Digits System ID: 5 XXXXX Mobile Number Number: 10 XXX-XXX-XXXX Preferred System: 1 0(B) or 1(A) Initial Page Channel: 3 333 or 334 Access Overload: 2 XX Group ID: 2 XX Digit Dial Limt: 2 00=32 digits Station Class: 2 XX Speed Dial Number: 12 XXXXXXXXXXXX Lock Code: 2-4 XX, XXX or XXXX Options (FCN 1)(1): 8 11001000 Options (FCN 2)(2): 8 00010100 Options (FCN 3)(3): 8 11110111 Step 11: Local MIN Not Not Ringer Not Not Not Use Opt Used Used Silence Used Used Used Step 12: Not Built-in Auto Full Not A/B Pref Home Used Monitor Lock Lock Used Select Only Only Step 13: (0=65 milliseconds, 1=Continous) Call-in DTMF Send Dial Not Cumulative Resettable Indiv Absence Interval Lock Lock Used Timer Timer Timer % Conversion of EB-3510 serial number to ESN % [For serial numbers 1,000,000 to 1,999,999] (Stamped Serial Number) - (1,000,000) + (262,144) = ESN without prefix Example: Serial Number is 1,234,567 (1,234,567) = (1,000,000) + (262,144) = (496,711) This phone's ESN is 13600496711 % For serial numbers 2,000,000 to 2,999,999 % (Stamped Serial Number) - (2,000,000) + (524,288) = ESN without prefix % For serial numbers 3,000,000 to 3,999,999 % (Stamped Serial Number) - (3,000,000) + (786,432) = ESN without prefix Display ESN: Insert Program Adaptor (PRE 3/91 Phones only) Enter Maintenance Mode: * + 0 + 0 + 0 + 0 + # or * + 0 + # + 0 + * + 0 + # ( if phone was manufacturerd after 3/91) Press * + 3 + SND Press 1 + 1 + SND ESN will display in decimal. Since the display shows 10 digits maximum, first digit of the prefix (136) is hidden. Press CHK to see the missing "1" New Unlock Code: NAM Multiple NAM Select: F + 8 System Select: F + 7 + X X=1 Standard (AB or BA) X=2 A Only X=3 B Only X=4 Home ------------------------------------------------------------------------------- PANASONIC 6106, 6110, EB311 AND EB362 ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: PANASONIC Programmer: Handset with PANASONIC programming adaptor ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Yes, 6106 - No, 6110 (requires conversion) Handset Programmable: Yes, provided programming adaptor is available Number of Channels: 666 (6106) or 832 (6110) Programming Sequence: Connect programming adaptor to phone and 12 volt power supply Power On Enter the following passwords * + 0 + 0 + 0 + 0 + # (wait for 0) * + 1 + SND ( wait for 1) 5 + 0 + SND (display will Clear) Enter individual data then press STO and the correct 2 digit location (i.e. 01, 02, etc) Write NAM information with STO + * + * Steps # of Digits 01 System ID: 4 XXXX 02 Mobile Number: 10 XXX-XXX-XXXX 03 Lock code: 3-4 XXX or XXXX 04 Frequently Dialed #: 10 XXX-XXX-XXXX 05 Station Class: 2 XX 06 Initial Paging Channel: 3 XXX 07 Access Overload: 2 XX 08 Group ID: 2 XX 09 Options(1): 8 11X11100 10 Options(2): 8 00000100 11 Options(3): 8 11000011 % Manufacturer Options % Step 9: Local MIN Preferred EE Rep Use Opt System Sig Opt Horn N/A N/A 1 1 0(B)-1(A) 1 1 1 0 0 Step 10: Built-in Auto A/B Pref Sys Home N/A Monitor Lock N/A N/A Sel. Only Only 0 0 0 0 0 1 0 0 Step 11: (0=65 milliseconds, 1=Continuous) Call In DTMF Total Call Ind Call Absense Interval N/A N/A N/A N/A Timer Timer 1 1 0 0 0 0 1 1 % Conversion of 6110 serial number to ESN % [For serial numbers 1,000,000 to 1,999,999] (Stamped Serial Number) - (1,000,000) + (262,144) = ESN without prefix Example: Serial Number is 1,234,567 (1,234,567) = (1,000,000) + (262,144) = (496,711) This phone's ESN is 13600496711 % For serial numbers 2,000,000 to 2,999,999 % (Stamped Serial Number) - (2,000,000) + (524,288) = ESN without prefix % For serial numbers 3,000,000 to 3,999,999 % (Stamped Serial Number) - (3,000,000) + (786,432) = ESN without prefix Horn Alert: F + 4 + 4 New Unlock Code: NAM System Select: F + X X=7 Home X=8 B Only X=9 A Only X=# BA or AB ------------------------------------------------------------------------------- PANASONIC 6104EA & 6104EC ------------------------------------------------------------------------------- NAM Type: Tri-State Manufacturer: PANASONIC Programmer: Motorola 1801 - Celnum or Curtis ESN Prefex DEC: 136 HEX: 88 ESN, S/N Match Required: Yes Programmable Handset: No Available Channels: 666 Phone Number Format: XXX-XXX-XXXX Lock Code Format: XXX MIN Option: Enabled Repertory Option: Enabled Handsfree Option: Disabled (Enable if equiped) Local Use Option: Enabled End-to-End Signalling: Enabled Horn Alert Option: Enabled System ID Format: XXXXX Preferred System: A or B Access Overload Class: XX Group ID Format: XX Initial Paging Channel: 333 or 334 Station Class: 00 Horn Alert Code: END + # (simultaneously) New Unlock Code: NAM System Select: N/A ------------------------------------------------------------------------------- PANASONIC 6104EB ------------------------------------------------------------------------------- NAM Type: Tri-State Manufacturer: PANASONIC Programmer: Motorola 1801 - Celnum or Curtis ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Yes Programmable Handset: No Available Channels: 666 Phone Number Format: XXX-XXX-XXXX Lock Code Format: XXX MIN Option: Enabled Repertory Option: Enabled Handsfree Option: Disabled Local Use Option: Enabled End-to-End Signalling: Enabled Horn Alert Option: Enabled System ID Format: XXXXX Preferred System: A or B Access Overload Class: XX Group ID Format: XX Initial Paging Channel: 333 or 334 Station Class: 00 Hex Address B7 B0 13 0 0 0 1 0 0 0 0 14 0 1 0 0 0 0 1 1 Hex Address 13 - B4 A/B Select Hex Address 14 - B6 DTMF Interval B1 Total Call Timer B0 Individual Call Timer Horn Alert: END + # (Simultaneously) New Unlock Code: NAM System Select: F + X X=7 Standard AB or BA X=8 Preferred Only (A or B) X=9 Non-Preferred Only (B or A) ------------------------------------------------------------------------------- PANASONIC 6105EA, 6105EB & 6105EX (100, 101, 102, 103, 104, 105) ------------------------------------------------------------------------------- NAM Type: Tri-State Manufacturer: PANASONIC Programmer: Motorola 1801 - Celnum or Curtis ESN Prefix DEC: 136 HEX: 88 ESN, S/N Match Required: Yes Programmable Handset: No Available Channels: 666 Phone Number Format: XXX-XXX-XXXX Lock Code Format: XXX MIN Option: Enabled Reportory Option: Enabled Handsfree Option: Disabled Local Use Option: Enabled End-to-End Signalling: Enabled Horn Alert Option: Enabled System ID Format: XXXXX Preferred System: A or B Access Overload Class: XX Group ID Format: XX Initial Paging Channel: 333 or 334 Station Class: 00 Hex Address B7 B0 13 0 0 0 1 1 0 0 0 14 1 1 0 0 0 0 1 1 15 1 0 0 0 0 0 0 0 Hex Address 13 - B4 A/B System Selection B3 16 digit display Hex Address 14 - B7 Received Call Indicator B6 DTMF Interval B1 Total Call Timer B0 Individual Call Timer Hex Address 15 - B7 Last Digit Clear Horn Alert: END + # (Simultaneously) New Unlock Code: NAM System Select: STO + # + X X=1 Standard AB or BA X=2 Preferred Only (A or B) X=3 Non-Preferred Only (B or A)