------------------------------------------------------------------------------- NOKIA-MOBIRA LX-11 & M-11 ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: NOKIA-MOBIRA Programmer: Handset or LX-11 Service Handset ESN Prefix DEC: 165 HEX: A5 ESN, S/N Match Required: Yes, either a match or subtract 737856 from serial number. Handset programmable: Yes, security code must be known Number of Channels: 832 Programming Sequence: Power On Enter Programming Mode: * + 3001 + # + XXXXX + SEL + 9 + END XXXXX=12345 (from factory) or XXXXX=Current Security Code "IdEnt IF InFO Pri" will display Press END key to step through parameters To toggle parameters, press SND Once Last parameter is entered and END key is pressed, the information is stored in the NAM Programming Sequence for 2nd NAM: Enter Programming Mode described above "IdEnt ID InFO Pri" will display Press SND to toggle to second NAM "IdEnt ID InFO OPT" will display Press END, "OPt InFO EnABLEd" appears Press END key to step through parameters and program as outlined above. # of digits System ID: 5 XXXXX Access Method (MIN Opt): 1 1 Local Use: 1 1 Phone Number: 10 XXX-XXX-XXXX Station Class: 2 08 Initial Page Channel: 3 333 or 334 Access Overload: 2 XX Preferred System: 1 A or B (SND to toggle) Group ID: 2 XX Security Code: 4 XXXX Manufacturer Date: Can't be changed Installation Date: 6 mm/dd/yy "Prog Done" will appear Horn Alert (Option): SEL + 2 + Turn ignition Off New Unlock Code: SEL + 5 + (5 digit security code) + SEL (Unlock Code Displays) + New 4 digit Unlock Code + SEL Select System: SEL + 1 + 1 + 1 (To Scroll Choices) Both Standard AB or BA H Home (A only or B only) Non H Non-Home (A only or B only) H Sid Home Only ------------------------------------------------------------------------------- NOKIA MOBIRA M-10 ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: NOKIA MOBIRA Pogrammer: Phone Handset or Service Handset ESN Prefix DEC: 165 HEX: A5 ESN, S/N Match Required: Yes, either a match or subtract 737856 from serial number for ESN. Handset Programmable: Yes, previded lock code is known Number of Channels: 832 Programming Sequence: Power On Enter Programming mode: * 17 * 3001 * XXXX * XXXX=1234 (new phones) else XXXX=current unlock code Once last item is entered then phone is returned to normal operations SEL button increments steps. # of Digits System ID: 5 XXXXX MIN Option: 1 1 Local Use: 1 1 Phone Number: 10 XXX-XXX-XXXX Station Class: 2 08 Initial Paging Channel: 3 333 or 334 Access Overload: 2 XX Group ID: 2 XX Unlock Code: 4 XXXX Horn Alert: SEL + 2 New Unlock Code: NAM System Select: SEL + 1 + 1 + 1 etc... (following will appear) A A only B B only S AB or BA H Home Press CLR to exit ------------------------------------------------------------------------------- NOKIA-MOBIRA P-30 Portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: NOKIA-MOBIRA Programmer: Keypad or Service adaptor ESN Prefix DEC: 165 HEX: A5 ESN, S/N Match Required: Yes Handset Programmable: Yes, provided security code is known. Number of Channels: 832 Programming Sequence: Power on Enter Access Code * + 17 + * + 2001 + * + XXXXX + * XXXXX=12345 from factory else XXXXX=current security code HO-Id should appear in display Press SEL to enter data and increment Phone automatically writes NAM information upon completion of final step # of digits System ID: 5 XXXXX MIN Option: 1 1 Local Use: 1 1 Mobile Number: 10 XXX-XXX-XXXX Station Class: 2 10 Initial Page Channel: 3 333 or 334 Access Overload: 2 XX Group ID: 2 XX Security Code: 5 XXXXX New Unlock Code: SEL + 75 + 5 digit security code (NAM) + CLR new 4 digit unlock code Sytstem Select: SEL + 1 + 1 + 1 + etc.. (following will appear) S Standard AB or BA A A only B B Only H Home Display will clear in two seconds. ------------------------------------------------------------------------------- NOKIA MOBIRA P4000 & PT-612 Portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: NOKIA MOBIRA Programmer: Keypad (provided current security code is known. If not, service adaptor is necessary to access program parameters) ESN Prefix DEC: 165 HEX: A5 Number of Channels: 832 Programming Sequence: Power On Enter Program Mode: * + 3001 + # + XXXXX + SEL + 9 + END XXXXX=12345 (new phones) else XXXXX=current security code "IDENTIF INFO PRI" will display (Press SND to toggle "on' if necessary) Press END to step through parameters To toggle parameters, press SND Once programming is complete, power phone Off then ON to exit program mode # of digits System ID: 5 XXXXX + END Access Method (MIN Opt): 1 1 + END Local Use: 1 1 + END Mobile Number: 10 XXX-XXX-XXXX + END Station Class: 2 10 + END Initial Paging Channel: 3 333 or 334 + END Preferred System: 1 (A or B) + END (SND to toggle) Group ID: 2 XX + END Security Code: 5 XXXXX+ END Serial Number: Press END Manufacturer Date: Press END Installation Date: 6 mm/dd/yy + END Programming Second NAM: With "IDENTIF INFO PRI" on display, press SND to toggle to "IDENTIF IBFO OPT" Enter information for steps 1-13 for the 2nd NAM Power Phone OFF and ON to complete the program process New Unlock Code: SEL + 5 + 5 digit security code (NAM) (Current Unlock Code will display) + new 4 digit Unlock Code + SEL System Select: SEL + 1 + 1 + 1 + etc.. (to scroll choices) Home, A, B, Both AB or BA