úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú
    ú                                                                     ú
    ú   ÜÛßßÛÜ         ßÛÛ  ßÛÛ          ßÛÛ                              ú
    ú  ÛÛ    ß  ÜÜÜÜÜ   ÛÛ   ÛÛ  ÜÜ ÜÜÜ   ÛÛ ÜÜ   ÜÜÜÜÜ  ÜÜ ÜÜÜ   ÜÜÜÜÜ   ú
    ú  ÛÛ      ÛÛÜÜÜÛÛ  ÛÛ   ÛÛ   ÛÛ  ÛÛ  ÛÛß ÛÛ ÛÛ   ÛÛ  ÛÛ  ÛÛ ÛÛÜÜÜÛÛ  ú
    ú  ÛÛ    Ü ÛÛ       ÛÛ   ÛÛ   ÛÛ  ÛÛ  ÛÛ  ÛÛ ÛÛ   ÛÛ  ÛÛ  ÛÛ ÛÛ       ú
    ú   ßÛÜÜÛß ßÛÜÜÜÛß ÜÛÛÜ ÜÛÛÜ  ÛÛÜÜÛß ÜÛÛ  ÛÛ ßÛÜÜÜÛß  ÛÛ  ÛÛ ßÛÜÜÜÛß  ú
    ú                             ÛÛ                                      ú
    úúúúúúúúúúúúúúúúúúúúúúúúúúúú ÜÛÛÜ úúúúúúúúúúúúú CrAcKinG CoRPoRaTioN úú



NEW P100 V1.0
NOTE:- A mouse and working mouse driver are required to use this program.
Log to A: type P100 and enter.

Note the two scroll bars one to the left and one to the right of the centre
window, click and drag the LEFT HAND scroll bar about half way down the screen
, when you release the mouse button a number which relates to timing speed 
will appear on screen. We recomend you try 7200 first as a starting
point. adjust the bar untill a successfull chipping of V1.0 has been done,
note the speed selected for next time.
NOTE:-THE PROGRAM WILL NOT WORK AT ALL IF THE LEFT SCROLL BAR IS NOT PROPERLY
ADJUSTED WITH YOUR MOUSE .DO NOT adjust the right hand scroll bar, this is 
factory set.

Functions within the window can be mouse selected or use the TAB key to
rotate around the selection buttons. Use TAB key to select ESN window,
enter ESN without spaces or slashes eg:-01010012345 and press enter, the
selection window will now show chipping options. Again mouse or TAB key
and enter to select.

On screen LABELS:
1. EARLY P4 = P4 versions V2.0 to 3.2 (Thin aerial)
2. MEDIUM P4 = P4 versions 3.4 to 3.6  (Thin aerial)
3. P100/LATE P4 = Versions V1.3 to V1.8(Thick aerial P4 and Early P100)
4. LATE P100 = P100 version 1.0

PLEASE NOTE:- IT takes about 90 seconds to chip the phone, after the first
few bleeps there will be no sound or other on screen indication that anything
is happening. DO NOT be tempted to disconnect the phone or take any other 
action untill the two red EXIT windows "wobble" and the new ESN is displayed
on the screen of the phone.

When programming P100/LATE P4(V1.3 to V1.5))it will be necessary to change the 
software rom while programming and replace the original software rom 
afterwards. NOTE: Some customers report that they have been able to program 
these versions without rom changing, we have not found this to be so but
it may be worth trying.

N.B. the rumor has it that if it is a 1.5 p100 with a toshiba processor
it can be blown as a 1.0 (not proven to me yet!)