NEC P7 Cellular Phone Programming

NEC P7 a.k.a. NEC 701

This information is from an australian version, it is not known if it works on any others.

9*762##074 FCN RCL 76 RCL #01

RCL #71 to get into NAM programming mode, then the steps are:

  1. PRESS # Enter MIN

  2. PRESS # THEN THE 4 DIGIT LOCK CODE

  3. PRESS # THEN THE HOME AREA SID CODE.

  4. PRESS # GI MARK 00

  5. PRESS # FIRST P-CH 0333

  6. PRESS # SYSTEM A-1

  7. PRESS # ACCOLC PUT IN 0 AND THE LAST DIGIT OF THE MOBILE NUMBER

  8. PRESS # MIN MARK YES-1

  9. PRESS # LOCAL USE YES-1

  10. PRESS # EMG NO 000

  11. PRESS # FCN STATE 00

  12. PRESS # Area Code *

  13. PRESS # PROGRAMMING IS COMPLETE

  14. PRESS CLR FOR 1-2 seconds SECOND

  15. PRESS RCL # 0 2

RCL #24 displays ESN

RCL #02 reboots phone

Editor's note: These commands seem to be similar to those used on the P2/P3.

If you have no RCL key use the MEM key instead