From dplumb@cix.compulink.co.uk Wed Oct 9 12:27:22 1996 Date: Tue, 8 Oct 96 00:51 BST-1 From: Dave Plumb To: drwho@l0pht.com Cc: dplumb@cix.compulink.co.uk Subject: Re: *** Forwarded from Usenet/alt.cellular-phone-tech: message 18203 * In-Reply-To: Nick, Ok, I've resisted it so far, but any chance of a copy of this programme? > haven't heard of any. i have coded small program to convert output of > PREA or EERE to binary format. Found some nice features with that - like > where is welcome message stored (so you can change it with EEWR) and I'm inclined to start playing around with EEWR settings now I can find out what was there before. Ideally I'd like to dump the lot out and check it with someone elses SIM inserted who doesn't have SMS capabilities to see if I can activate these features independently of the service provider... BTW on your web pages you don't seem to have the pinout of the Ericsson range (unless I've missed it), which is as follows: Path: cix.compulink.co.uk!news.compulink.co.uk!btnet-feed1!btnet!newsfeed.intern etmci.com!chi-news.cic.net!nntp.coast.net!inquo!bofh.dot!nntp.uio.no!news. kth.se!tybalt.admin.kth.se!celsiustech.se!seu net!news2.swip.net!mn6.swip.net!mn5.swip.net!anders.brink From: gh337@mobile.fon Newsgroups: alt.cellular-phone-tech Subject: Ericson DH353 / Ford Taurus car phone Date: Sat, 01 Jun 1996 16:36:00 -0100 Organization: SoftSpeed Lines: 17 Message-ID: <19960601163600.31b1c1b4@mailbox.swip.net> NNTP-Posting-Host: dialup106-2-7.swipnet.se NNTP-Posting-User: 4eb3d61a6094ae1628f3b33ffd9356aa m> The Ericson has a 14-pin connector on its base with an 1 In Voice 2 In +5V=External Power, 0V=Battery 3 Out Ext Speak control 4 Analog GND 5 Out Voice 6 Out +5V=POWER ON, 0V=POWER OFF 7 Out Charger control 8 Digital/DC GND 9 In 0V=normal,+5V=test, +12V=test+flash 10 In Hook 11 In TTL serial in 12 Out TTL serial out 13 In 0V for aprox 1 sec = POWER ON/OFF 14 In DC Power supply -=-=-=-=-=-=-=-= +------------------------+ | # | \ | .............. / \ 1 8 14 / \__________________/ BTW I finally tidied up my programming lead. I acquired a genuine Ericsson car charging lead which had moveable pins. I removed the RJ11 socket from the bottom connector, and managed to fit the MAX232 and five capacitors internally. It gives a very neat result, with what appears to be just two sockets (9 pin D to Ericsson) and a connecting lead. Regards, David