From furno@ds.cised.unina.itTue Jul  9 13:37:14 1996
Date: Tue, 09 Jul 1996 13:02:00 -0700
From: Cosmo Furno Palumbo <furno@ds.cised.unina.it>
To: drwho@l0pht.com
Subject: 1341 interface

I found the connections for the 1341 &1331 eric soft.
Yuo must use a RS232 to TTL converter (you can use a MAX232 with 4 
condenser.I hope you have the scheme, if not ask me.).
Using a the 25 pin serial the connections are:
DB25
2,3 into the converter and out to pin 11 and 12 on the 237
7,8 connected to gnd and to pin 8 of 237
5,6 connectet

DB25                          237
2----------converter-----------11
3----------converter-----------12
7-------------GND--------------8
   |
8---
5---
   |
6---

It works fine.The 1341 works with the 237.Sometimes you need to exit 
program and re-enter to continue programming.

Bye

                                            
P.S. I am using a my friend computer at university where i study because 
my mailer (mail. asianet.it ) is unable to deliver  e- mail to you but i 
can receive it from you.My E-Mail address is SRuggieri@mail.asianet.it
(yes still am I)