   |||||||||   ||||||||||      //|||||\\
   ||          ||      ||     ||       || 
   ||          ||||||||||      \\
   |||||||     ||\\              \\ 
   ||          ||  \\               \\
   ||          ||    \\      ||       ||
   |||||||||   ||      \\     \\|||||//   32pro




ERS, Emergency Recovery System 32pro V 4.2 September 7, 1997***Pre final***
Copyright © 1996/97. All Rights Reserved.
Theodore Fattaleh author programmer and publisher.
All Program Names are Registered Trademarks of their Respective Owner.
http://www.mslm.com     same as       http://www.multisyslaunch.com
My Email addresses:
2000@msn.com
rustyted@pacbell.net
2000ted@gte.net
**********************
Remember this is a beta and any previous version should be deleted because 
previous versions had serious bugs, also you should check and download for
newer versions, this should be a flawless version though.
*IMPORTANT
Always read the Reinstall instructions below for reinstall instructions because
there will be always new instructions.
Read bugs fixed so far at the bottom of the page and new features added.
Note:
If you are reinstalling, delete ers.dat, ers1.dat, profile1.dat from the ERS32pro 
directory, also delete the Profiles backup directory if you have versions dated before
August 3rd 1997.

You need to be a registered user to enable grayed features and run Auto backup.

(Help.exe  has been fixed, and has a lot nice features, please look into it, you can use it 
as a  scratch pad, if you decide to make a copy of it and run it in different place then 
copy notes1.rtf, notes2.rtf, notes3.rtf,  notes4.rtf and notes5.rtf  notes6.rtf along with
 it and keep them in the same directory you keep Help.exe. improved again Aug 30th.)
Read the troubleshooting section below if Help will not run.
You need the VB kit 500 to be installed in your computer for ERS32pro to run.
 ERS has its own Setup Wizard, ERS doesn't do any modifications or entries
to the registry or any system files, it merely makes new ERS directories  and
copy ERS files to the appropriate directories  and make shortcut to the Start menu,
ERS keeps its data in its own registry (.dat files) instead of using your registry.
In some cases you may need to do an extra step in installing but it will pay back.


Page2
This version of ERS is a 32 bit program, however, Restore batch files are not
converted from long file name to short file name , ERS is installed in a 8 letter
file name format. 
Since Restore has to be done from the "Command Prompt only" in MS-DOS,
I don't see why install it in a long file name path knowing that MS-DOS does not 
recognize it and then have to go  back and fourth through the conversion process.    
The Setup Wizard  will make 20 folders and 7 sub folders of the Profiles folder
in theERS32pro directory.  Read Installation below for more information.

Features: ERS creates backups of Win95 System files. Should the
Win95 registry or other System files get corrupted, backups will then be
available to restore from.
ERS works like magic, in two minutes you can restore from backup and you will be
on your way computing instead of trying to manually troubleshoot or reinstall Win95,
saving you many hours of pain.
ERS is unlike any of the disappointing backup and restore programs , its the
legitimate and the original.
In addition ERS has options to backup the Win95 Startup files and 103 vital files
that  could save you from re installing.
Where C:\ is mentioned, its considering "C" as the boot drive. Where C:\Ers32pro
is mentioned , its considering you installed ERS32pro in the directory C:\Ers32pro.

***********************************************************

*LEGAL Agreement
================
ERS have been tested  successfully to restore Win95 System files listed
in the Overview section. Also ERS32 has been tested to install on computers 
with "A" as the boot drive as in NECK computers.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall publisher,
author or its suppliers be liable  for any damages whatsoever
(including, without limitation, damages for loss of business profits, business
interruption, loss of business information,  or any other pecuniary loss) arising
out of the use of or inability to use this product, even if  been advised of the
possibility of such damages.
Though some states jurisdictions do not allow the exclusion or limitation of
liability for consequential or incidental damages, the above limitation still 
apply to you.
It is your responsibility to read the readme.txt before installing.
***********************************************************
*OVERVIEW
System Files backup:


Page3
By using ERS, Win95 system files are backed-up and 
you are able to restore them (including the Windows Registry).
ERS has proven to be an excellent and reliable backup and restore program.

The program was implemented when it was found that the Win95 backup programs
 called ERU,CFGBCK, and when Win95  prompts you that registry is corrupted
and it will restore from backup were less than 100% reliable.
The ERS Backup is done from the Windows environment, but a restore must to be
done only from the  Command prompt Only(so called DOS outside Windows.)
(which is generally all that one can manage to get to when a really serious
 crash has occurred.)
The files that ERS creates backups from are:

System.dat,  System.da0,  User.dat,  User.da0,  System.ini,  Win.ini,  Command.com, 
MSDOS.sys,  IO.sys,  Protocol.ini,  Autoexec.bat,  Config.sys,   Dosstart .bat.
"Restore from fresh backup to system files will not create adverse behavior,
you can actually play around and restore from any backup and be able to go
back and select another with no adverse reaction. But be sure you do it from
the Command Prompt Only."

Total file number is 13 files, unless you have deleted  "Dosstart.bat", "Config.sys"
or  the  "Autoexec.bat."
A restore from ERS  works like magic! When system files gets damaged ERS will
restore the Win95 files to get you back where you were at the time you did the
backup. A GOOD FRESH BACKUP IS ESSENTIAL.
=======================
Windows Startup files are the files that start Win95 but doesn't include
the system files. If Win95 will not start after a restore from system files
then the other alternative to  restore from the Startup files backup.
KEEP THIS BACKUP CURRENT. Basically VMM32.vxd is the file that keeps
changing depending on changes you make to the startup.
"Microsoft recommends re-installing Win95 if VMM32.vxd gets corrupted but 
here is a better alternative to Microsoft lengthy recommendation that worked
OK with  me, however a re-install still could be necessary."
The files are
vmm32.vxd, kernel32.dll, krnl386.exe, Gdi.exe, Gdi32.dll, user.exe, user32.dll 
win.com .
=======================
Windows 95 Vital files are files that could be over written by other programs
but not as often as System files.ALWAYS KEEP THIS BACKUP CURRENT
AT ALL TIMES. if you install a new program do a second backup to Vitals2 
backup after installation, wait couple days, and if everything is working properly,
then you can delete the older backups.

Page4
You can restore from this backup if you get error messages from Win95 that this 
file is missing corrupted or dated wrong then you don't have to restore all these files
but can pick out the ones that the error message refers to and replace only the 
damaged file{s}. 

Some of these files can be replaced from within Windows but many have to be 
replaced from the "Command Prompt Only", as an example, oleaut32.dll can be
replaced from within Windows  only if you have ALL other applications closed,
including  MS Internet Explorer While the vmm32.vxd file is always running, 
and can never be replaced from within Windows.

As a last resort before you make the decision to re-install Win95, you can make a
complete restoration from this backup, and hopefully get Windows back in good 
working order, in a minute or two.

There are about 103 windows 95 vital files, consuming about 10 Mb of hard 
disk space. Vital files include backups to the files that are over written by the 
Internet Explorer 4.0.
Your computer might not have all 103 files , don't worry if you see only 89 of these
are backed up, as you may not be using some of them yet, but you may later on see
them.

End Over View
************************************************************
*REGISTRATION
ERS 32pro:
Support shareware and pay the registration fee, cost is $20 only for one computer,
$4 for each extra license.
*Credit Card, Credit card processed through a high security, reputable CC 
processing agency, linked from ERS homepage http://www.mslm.com
Check, cash  Mail to:
Theodore Fattaleh
1834 S Bentley Av. #202
West Los Angeles, CA 90025
USA
=====================
http://www.mslm.com     same as       http://www.multisyslaunch.com
My *Email addresses are, if you get a returned mail try the other one.
If you are curious why my Email address is 2000 or 2000ted or rustyted,
its just easy to remember.
2000@msn.com   also its  2000@classic.msn.com
rustyted@pacbell.net
2000ted@gte.net
Look for new Email addresses at my homepage.
Page5
This program is made to be downloaded from the Internet only, so we don't ship
unless you absolutely can't download the software, and if we ship its  no 
different from what you get on the net except being on floppies with labels on them.
Shipping cost is:
$6 within the USA and Canada.
$10 all other countries.

With the registration you get the disabled parts of this program enabled,
E-mail support , the final version of this program and future updates plus
mail notifications on what's new with ERS. Also you will get a surprise or surprises.

*************************
*INSTALLATION

Before ERS32Pro will run,  you MUST install the VB kit 500 , either included
with this download or download it at my homepage.
ERS has its own setup Wizard, ERS doesn't do any modifications or entries
to the registry or any system files, it merely makes the new directories  and
copy ERS files to the appropriate directories  and make shortcut to the Start menu.
This version of ERS is a 32 bit program but batch files are not converted from long file
name to short file name so it has to be installed in 8 letter path, I don't see why install it 
in a long file name path knowing that MS-DOS does not recognize it and has to be
converted back .
In some cases you may need to do an extra step in installing but it will pay back.
The ERS setup wizard will make 20 folders and 10 sub folders of the Profiles folder,
one external file and one external folder.

1ERS folder is kept in the boot drive C:\, where you will find all the restore batch files,
DO NOT.. double click these batch files from within Windows, you can however, right 
click them and select Edit if you are curious, but don't make any changes unless you 
know what you are doing.
ERS.bat will be found in the C:\ directory, you can double click this specific .bat file 
with no resulting problem because all it contains is data information about your backup
dates, reminder on the restorations command and your added notes to the backup,
there is no executable commands, so you should feel free to get familiarized with it.
If restoring from backup Just type ERS OR ers.bat at the Command Prompt
and it will automatically change directory to the 1ers folder . Very easy, just type ERS.
Ers.bat created and recreated every time you do a backup.
Note: Sometimes MsDos wouldn't recognize typing ERS then type ERS.bat
ERS Setup Wizard copies the following files if you don't have them but doesn't
overwrite any. Attrib.exe to "C", and the self registering files richtx32.ocx, and comdlg32.ocx   and  stkit432.dll to  C:\Windows\System.


Page6
*REINSTALLING
Use the Setup.exe and select Reinstall if you want to reinstall and rebuild the previous
installation, or if you download an update.
Once you click the  Reinstall in Setup.exe, select to either Reinstall ERS32pro or
Install Richtx32.ocx. (see troubleshooting help.)

Delete  ers.dat, ers1.dat , ers2.dat and  profile1.dat. Also delete all
 backups in the Profiles folder, because I changed the configurations on those
.dat files, (do this only if you have ERS32pro versions before August 3, 97)
Delete Notes1.rtf through notes6.rtf in C:\ERS32pro\Ersfiles, the 6 RTF files 
are backed up now in "Notes Backup1" and "Notes Backup2" folders.
*UNINSTALLING
To Un-install simply delete the entire Ers32pro directory ,
Delete shortcuts found in C:\Windows\Startmenu\Programs.
Delete Sched3d.lnk or Sched7d.lnk in C:\Windows\Startmenu\Programs\Startup
if exist.
Also delete ERS.bat and the 1ERS folder from the root directory C:\ .
Don't forget to empty the Recycle Ben.
There is no registry entries to take out.

End Installing, Reinstalling and Uninstalling.
****************************************************
CREATING *BACKUPS
Also see Auto backup below.
Explanations of backups. (read the Restore section on how to restore.)
-----------------------
*3Day Rotating:
This is a three day rotating backup, if you are using the seven day
rotating backup this will overwrite day 1, day 2 and day 3 of the 7 day backup.
{if you are indeed using the seven day rotating backup}.
Once you execute the backup
backup in day 3 will be deleted, backup in day 2 will transfer to day 3, 
backup in day1 will transfer to day 2 and a fresh backup will be placed in Day 1.

In another words or backwards, once you execute3 Day rotating, today's backup
 will be placed in Day 1, yesterday's in Day 2 and the day before yesterday will be
 placed in Day3.
------------------------
*7Day Rotating: (Recommended)
This is a seven day rotating backup, if you are using the three day
rotating backup and decide to go to the seven day rotating backup, this will overwrite
the routine Day 1, Day 2 and Day 3 of the 3Day Backup.



Page7
Once you execute this backup
backup in day 7 will be deleted, backup in day 6 will transfer to day 7,
backup in day 5 will transfer to day 6, backup in day 4 will transfer to day 5,
backup in day 3 will transfer to day 4, backup in day 2 will transfer to day 3,
backup in day 1 will transfer to day 2, and a fresh backup will be created in Day 1.
hope I didn't confuse you.

Creates new backup in Day1>>Day2>to>Day3>to>Day4>to>Day5>to>
Day6>to>Day7>gets>Deleted

All above backups are made in C:Ers32pro\D1, D2, D3..through...D7 . folders.
=================================
BackupA, BackupB and BackupC are manual backups of System files that are
made independent of each other and any other.
These backups are made in C:\ERS32pro\BackupA, BackupB, BackupC folders.
All the above is a System files backups.
***************************
Vitals1 and Vitals2: 
Are backups of about 103 Win95 essential files which are most likely 
to get over written or corrupted, backing up these files could save you a 
Win95 re-install or a format of the hard drive, keep them current and keep only
one backup, after you install a new program do another backup in Vitals2.
wait few days then delete the older one.
You will find these backups in C:\ERS32pro\Vitals1, Vitalw1 and Vitals2, Vitalw2 and
uses about 8mb of hard disk space.
The letter S in Vitals1 folder stands for files backed up from Windows\System 
directory.
The W in Vitalw1 folder stands for files backed up from the Windows directory.
The 1 stands for backup #1 and  2 stands for backup #2.
============
Startup1 and Startup2 backups:
These are the  Win95 startup files, if Win95 does not start and a restore
from System files backup did not help then hopefully this restore will restart
your computer.
These backups are kept in C:\Ers32pro\Startup1, Startup2, Wincom1 and wincom2.

End Backup
**************************************************







Page8

*RESTORING
Note: Don't forget to print this section.
To Restore:
Restart computer and quickly press F8 when you see the line "Starting Windows 95",
appear on the screen, and select the "Command Prompt Only" from the menu.
TYPE ERS OR ers.BAT at the command prompt to execute ERS.bat, by doing so
it automatically changes directory to the 1ers folder which will then show you all the 
notes you have previously written, and the dates of all the backups, while producing 
a list of the required restoration commands., so all you need to remember the word 
ERS.If for some reason typing ERS didn't function then type, ERS.bat or type:
CD 1ers.
there :

Type BackupA to restore from BackupA
Type BackupB to restore from BackupB
Type BackupC to restore from BackupC

Type Day1 to restore from Day1 backup( today's backup.)
Type Day2 to restore from Day2 backup (yesterday's backup.)
Type Day3 to restore from Day3 (day before yesterday's backup.)
so on down the line through Day4, Day5, Day6 and Day7 that if you backup daily.

Type vitals1 to restore from vitals1 backup.
Type vitals2 to restore from Vitals1 backup.

Type startup1 to restore from startup1 backup.
Type startup2 to restore from startup2 backup.

Note: If the Autoexec.bat, Config.sys and the Dosstart.bat size are equal to
zero 0 bytes (or empty) then MS-DOS will give you "file not found" while restoring.

REMEMBER...!!!   Type ERS, at the "Command Prompt Only"

Just type ERS, ERS will then guide you, and remind you how to proceed with the
restoration process.
{If you see an ERS.bat in the root directory don't delete it.}
Note: You may need to add the  .bat extensions to the above restore commands.
Note:  Don't forget to print above section.

 



Page9
Explanations of many MS-DOS modes in Win95:
************************************
There could be up to four instances of MS-DOS in Win95.
In case of a clean Windows' 95 install there are only three.
Restore from ERS backups works only with one:
That one is the "COMMAND PROMPT ONLY" 

To access it start your computer and quickly press the F8 key when you see the
 line, "Starting Win95", appear on the screen.
 From the menu  that appears you must select: "Command Prompt only", 
(that is MSDOS Stand alone), Win95 is completely out of the picture here.
REMEMBER, this is the ONLY one to select and use, in order to successfully restore
 Win95 system files using ERS.

*DO NOT UNDER ANY CIRCUMSTANCES RESTORE FROM ANY OF THE FOLLOWING :
===================
MSDOS inside windows called MSDOS Prompt. (don't use this one)

MSDOS mode outside Windows, is the one that when you Shut down windows
and select Exit to MS DOS.(Still controlled by Win95)(don't use this one)

When you start your computer and select F8 when says "Starting Win95"
from the menu you can select:
"Previous version of MS-DOS" if you installed Win95 on top DOS6.22
then you will have option in the menu to select.(don't use this one )

Also don't use the" Command Prompt in Safemode", absolutely NO, you are in the
windows environment here and MS-DOS doesn't know Safemode.

*********************************************************
*AUTO BACKUP

There is two ways to backup using Auto backup.
3 Day or  7 Day, refer to the Backup section to read about 3 Day and 7 Day
backups,.
By Selecting 3 Day  or 7 Day,  ERS will backup daily automatically upon
startups , it will show up only once every 22 hours and will pause for 30 seconds
before commencing backups giving you a chance to Cancel backup it if necessary, 
also you can bypass the 30 second pause by clicking on the "Bypass timer, backup
now" (look for new option to select Auto backup intervals time user define, soon)


Page10
You can select only one automatic rotating backup, 3 Day or 7 Day .
When you select 3Day then 7Day gets deleted from the Startup folder and when 
you select 7Day then 3Day gets deleted from the Startup.

This feature uses very little resources upon startups, specially with the 30 second pause.
The names of the Auto backups files are sched7d.exe and sched3d.exe, the shortcuts 
that  are placed in the Startup folder are either sched3d.lnk or sched7d.lnk.
You can use 3rd party schedulers to run the auto backups by executing the 
sched3d.exe or sched7d.exe, use only one and don't copy these .exe to outside
the directory of Ers32pro, you have to make shortcuts to them to run them if that
what you desire.
Notice view Window # 1 when you add or remove the 3 Day or 7 Day  Auto backup
from the startup folder.

Note: When you start and close the ERS program ERS.bat gets recreated in C:\ , 
To view the Startup folder click on the label that says "Auto back add to startup"

If you have ERS installed in a non English Win95 you will need to make a shortcut
to the Sched7d.exe or Sched3d.exe to the Startup folder manually, don't copy or move
sched7d.exe or sched3d.exe but make a shortcut and copy or drag and drop the
Shortcut. Let me know if you want customized version for your native language.

**************************
