POWER PACK MANUAL INSTALL
for disks 1 through 5

Note: The following instructions require you to be able to use basic DOS and 
Windows commands and text editors. If you are not familiar with using these 
commands or editors, please refer to your DOS and Windows User's Guides for 
further information.

I. Enter the following at the C:\ prompt to create four directories:

1. MD POWERPAK
2. CD POWERPAK
3. MD MONO16
4. MD MIDISOFT
5. MD QUIKTOUR


II. Copy Install disks to appropriate directories. Assuming drive A: is your 
source disk, use the format " COPY  A:\*.*   C:\DIRECTORY", where 
"C:\DIRECTORY" is the path to your application.

1. COPY DISK 1 TO C:\POWERPAK
2. COPY DISK 2 TO C:\POWERPAK\MONO16
3.  Put DISK 3 in drive A: (or B: as applicable), and type the following:
	
	(Note: Enter the following two lines as ONE line, leaving a space 
	between them. If installing from B:\, use "B:\" in the place of "A:\")

	
	COPY  /B  C:\POWERPAK\MONO16\FB_22K16.DLL + A:\FB_22K16.DLL  

	C:\POWERPAK\MONO16\FB_22K16.DLL
	
4. COPY DISK 4 TO C:\POWERPAK\MIDISOFT
5. COPY DISK 5 TO C:\POWERPAK\QUIKTOUR


III. Expand compressed files as needed.

1. Edit the AUTOEXEC.BAT and add " ;C:\POWERPAK " to the end of the PATH line
2. Re-boot your computer
3. From the POWERPAK directory type LHARC X PROGRAMS and [ENTER]
4. From the MIDISOFT directory type LHARC X MIDISOFT and [ENTER]
5.  From the QUIKTOUR directory type LHARC X MVPOWER and [ENTER]


IV. Setting up the Drivers

(Note: If you do not have the original Pro AudioSpectrum installation disks, 
you may wish to copy the following drivers to a backup directory:

a) From the PROAUDIO (or other directory containing your Media Vision DOS 
utilities) copy MVSOUND.SYS, PREC.EXE, PKCD.EXE, PMIX.EXE, and PROMIX.EXE to 
the backup directory. 

b) From the WINDOWS\SYSTEM directory, copy MVMIXER.DRV, MVPROAUD.DRV, 
OPL3.DRV and MMMIXER.DLL to the backup directory. 


1.  From the POWERPAK directory type the following:
	
	COPY   MMMIXER.DLL  C:\WINDOWS\SYSTEM  then [ENTER]
	
	COPY   *.DRV  C:\WINDOWS\SYSTEM  then [ENTER]

	COPY   MVSOUND.SYS  C:\PROAUDIO then [ENTER]

	(Note: C:\PROAUDIO is the default directory for many Media Vision       products. Your product may be installed in a different directory. The   destination path should refer to that in which your Media Vision utilities      are installed) 


V. Setting up Windows Applications

1. From the Windows Program Manager use the File/New menu selection to create 
the POWER PACK Program GROUP.

2. From the Windows Program Manager use the File/New menu selection to crate 
the new Program ITEM for MONOLOGUE (MONO_16.EXE), DICTIONARY MANAGER 
(DICTMGR.EXE), MIDISOFT RECORDING SESSION (SESSION.EXE) and QUICK TOUR 
(MVPOWER.EXE), from their respective directories, and POCKET RECORDER 
(PREC.EXE), POCKET CD (PKCD.EXE), PRO MIXER (PROMIX.EXE), POCKET MIXER 
(PMIX.EXE), and the UPDATE document (UPDATE.WRI)  from the POWERPAK directory. 
This will create icons for the above applications. 








VI. Alternate Monologue install for DOS

If you need to access Monologue in DOS, an 8-bit DOS version is supplies on your Power Pack Installation Disk 1. To install this version, you will need a formatted 720 K, or high density 5¼" or 3½" disk. 

1. Copy MONO8.LZH to your POWERPAK directory 
2. Put the blank, formatted disk in the appropriate drive
3. From the DOS prompt in the POWERPAK directory (C:\POWERPAK), type 
LHARC X MONO8 A:\ (or B:\ if your blank disk is in that drive)
4. You can now run INSTALL from the floppy drive.

VII. To save space on your hard drive, you may wish to delete all the files whth .LZH extensions. To do this, type DEL  *.LZH from each of the above directories.