Manual Installation Procedure
Fusion CD 16E
(16-Bit board with internal SONY drive)
Version 1.2 Installation Diskette

* * * * * * * * * * * * * * * * * * * *    DOS Environment Installation   * * * * * * * * * * * * * * * * * * 
1.	Make a FUSION16 directory  (MD C:\FUSION16)
2.	Copy A: or B:*.* C:\FUSION16
3.	Add the following to the 
		CONFIG.SYS:
			DEVICEHIGH=C:\FUSION16 \MVSOUND.SYS D:3 Q:7 t:1 s:1,220,1,5 M:0
						('J:1' can be added to invoke joystick)
			DEVICEHIGH=C:\FUSION16\TSLCDR.SYS /D:MVCD001 

		AUTOEXEC.BAT:
			C:\FUSION16\MSCDEX.EXE /D:MVCD001 /M:10 /V /L:D /E
			PATH C:\FUSION16; . . . . etc.
			SET BLASTER=A220 D1 I5 T3
4.	Reboot the system.

* * * * * * * * * * * * * * * * * * *   Windows Environment Installation   * * * * * * * * * * * * * * * * * 
1.	Copy A:\*.386 C:\WINDOWS\SYSTEM
	Copy A:\*.CFG C:\WINDOWS\SYSTEM
	Copy A:\*.DLL C:\WINDOWS\SYSTEM
	Copy A:\*.DRV C:\WINDOWS\SYSTEM
2.	Edit WIN.INI - add the following to the [WINDOWS] section:
		LOAD=C:\FUSION\GBLD.EXE
	Save file and exit.
3.	Edit SYSTEM.INI and add the following:
		[386 enh]
		DEVICE=VPASD.386
		VIRTUALIZEHDIRQ=FALSE

		[MCI]
		MIXER=MCIMIXER.DRV

		[DRIVERS]
		WAVE=MVPROAUD.DRV
		MIDI=OPL3.DRV
		MIDI1=MVPROAUD.DRV
		AUX=MVPROAUD.DRV
		MIXER=MVMIXER.DRV

		[OPL2.DRV]
		DRUMCHANNEL=10...

		[MVPROAUD.DRV]
		DMA=3
		IRQ=5

	Save file and exit.
4.	Start Windows and enter the MultiMedia group.  Verify that (2) icons are present, then leave 	Windows.