ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
º TommySoftware CAD/DRAW Version 1.11a

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Current version

This version 1.11a of TommySoftware CAD/DRAW was released on October 20, 1993.
There might be a newer release available today. You can get information
concerning the current version where you got this program from.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Installation

The installation process is different depending on the way you received
TommySoftware CAD/DRAW. Please make sure to follow all steps carefully!

1. If you received TommySoftware CAD/DRAW on disk:

   On this disk you can find TommySoftware CAD/DRAW in packed form. In order
   to use this program, you have to unpack and copy it to your harddisk by
   means of the program SETUP.EXE. Set the current path to the disk drive
   containing the disk of TommySoftware CAD/DRAW and the following command:

        SETUP

   Then follow the instructions displayed on the screen.


2. If you downloaded TommySoftware CAD/DRAW from a BBS:

   As you are reading this text, you have succeeded in unpacking the file
   TSCD_A.EXE. As a result, you should now have at least the following files
   available:

        ADDRESS.TXT     README.TXT      REGISTER.TXT    OMBUDSMN.ASP
        SETUP.EXE       SHAREWAR.TXT    VENDOR.TXT
        TSCD_A.EXE      TSCD_B.TSX      TSCD_C.TSX      TSCD_D.TSX

   In order to install TommySoftware CAD/DRAW, make sure that all these files
   reside in the same directory or on the same disk. Now set the current path
   to that directory resp. disk and enter the following command:

        SETUP

   Then follow the instructions displayed on the screen.

   After the installation, you may delete the files stated above. But before,
   please give a copy of them to all your friends! Please make sure, however,
   that you give them all the installation files, and not a copy of the
   installed program. Without a proper installation, the program may not work
   properly on their computer.


Please do ONLY register at your local shareware dealer. He will also answer
your questions concerning TommySoftware CAD/DRAW. You can find his address in
the registration form that you can call with the command HELP > REGISTER.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Support via COMPUSERVE 

Questions concerning the installation and technical questions can be mailed
to TommySoftware via CompuServe 100273,1143. Before sending a mail, you should
download the file TSCDQA.TXT from the GRAPHICS SUPPORT forum (GO GRAPHS) in
Library Section 5, "Paint and Draw Programs". This file contains the current
Questions-and-Answers document build on all previous questions.
In this location, you will also get the answers to your own questions. Due to
this way of answering, your mail will be made public when answered! You should
keep this in mind when creating your mail.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º ATTENTION!!!  The content of the disk(s) may not be altered. The software   º
º may only be passed on if the price per disk does not exceed US$ 10.00 resp. º
º the equivalent value in the local currency. All trademarks must not be used º
º without permission.                                                         º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

As of October 1993