
                        ScanTek 2.9

                    A scanner driver for
               Microtek, Highscreen and Mustek
                      Flatbed Scanner


             Copyright 1995/96/97 Waldemar Zhner

                  Get It, Feel It, Love It


 Overview
----------

 The ScanTek scanner driver has the following features:

 1. Support of the following SCSI Microtek scanner models:
        MICROTEK IISP, MICROTEK II, HIGHSCREEN Flatbed Color IIs,
        ScanMaker E3, ScanMaker 35t

    Support of the following SCSI Mustek scanner models:
        Three Pass Scanners:
        6000CX, 8000CX (not tested), 12000CX (not tested) all should work

        One or Single Pass Scanners:
        6000SP, 8000SP (not tested), 12000SP (not tested) all should work
        6000CZ (not tested), 8000CZ (not tested)

        600IISP, 800IISP (not tested) all should work

    If your scanner is not mentioned in the list above try it and
    give me a response whether it works or not.

    Attention: Mustek scanners have a critical SCSI interface. It
               was reported to me that these scanners may not work
               with the A3000(T) internal SCSI interface. It is
               possible that these scanners do not work with other
               SCSI host adapters, either.
               But the Mustek 6000CX works in combination with an
               Oktagon SCSI host adapter.
               Be sure to disable reselection for Mustek scanners
               on your SCSI host adapter. Otherwise your system may
               not boot.


 2. Support of black/white, built-in halftone (dither), one-pass-color-scan,
    three pass color scan, grey, red, green and blue scan.

 3. Individual setting of resolution, scanning frame, contrast, shadow,
    midtone, highlight, exposure time and scanning speed for download to the
    scanner.

 4. Download of a color look up table (gamma correction table ) to the scanner
    supported.

 5. Scanning to IFF File of 1, 8 or 24 bit color depth. The maximum size of
    the scanned image is independent from the RAM size. After the scanning
    process it is possible to start an external program.

 6. GUI for preview and configuration of the driver. You need Kickstart 2.04
    but Kickstart 3.0 is recommended.

 7. Sizeable preview window in black/white or grey scale. Color preview
    on Cybergraphix screens (15, 16 or 24 bit necessary).
    There are much more skilled programs to view and manipulate the scanned
    images in color. (A tool like ADPRO, IMAGE FX or so is needed, if you
    want to do sophisticated postproduction)

 8. Screenmode requester to define custom screen for working. The actual public
    screen is supported as well

 9. Configurable SCSI device and SCSI ID. The driver supports only SCSI
    connectable scanners.

 10. The driver is tested with the following SCSI drivers: oktagon.device and
     gvpscsi.device V4.5.

 11. ScanTek is written using SAS C 6.55.

 11. ScanTek is SHAREWARE.

 12. The non registered version of ScanTek is a full working version, but all
     scanned images have black lines to motivate you to register.
     Additionally the maximum size of the preview is restricted.



 History
---------

 V2.9   9 Feb. 1997

   - Redesign of the Look-Up Table to ensure font sensitivity


 V2.8  11 Jan. 1997

   - New icons for ScanTek
   - Recognition and handling of new Mustek scanners enhanced
   - Minior bug fixes
   - Introduction of the ScanTek Support WebSite


 V2.7  6 Dec. 1996

   - Recognition and handling of new Mustek scanners enhanced
   - Recognition of Microtek ScanMaker E6 adapted


 V2.6  30 Oct. 1996

   - Full support of Mustek one pass scanners
   - Recognition of Mustek scanners enhanced


 V2.5  5 Oct. 1996

   - Workaround to handle strange color mode behaviour of Mustek
     one pass scanners
   - Reverse scanning in black and white mode introduced


 V2.4 10 Sept. 1996

   - Support of Mustek SCSI one pass color scanners in color mode and
     parameter ranges.
   - ScanTek can now open its GUI windows on the actual public screen.


 V2.3  6 Sept. 1996

   - Color Preview on Cybergraphix screens in true color mode
     (15, 16 or 24 bit) for onepass flatbed scanners
   - Grey/Red/Green/Blue Preview on Cybergraphix screens in true color mode
     (15, 16 or 24 bit) for threepass and onepass flatbed scanners
   - Change and recall of predefined resolution values


 V2.2 26 July 1996

   - Enhanced support for Mustek scanners
     "Exposure Time" and "Contrast" parameters are now correct
   - Gamma value "All" now works on threepass scanner
   - Alternative Black/White scanning mode


 V2.1  5 July 1996

   - Preview now fully supported for Mustek 6000CX
   - Special adaption for Mustek 6000CX to use 8.5 * 14 inch scanning frame


 V2.0  30 Apr. 1996

   - Preview in color mode with proper options values
   - Use of expanded Contrast and Exposure Time selections on certain scanners
   - X and Y Aspect Ratio in color images is correct now
   - ScanMaker E3 does not support undocumentated red, gree and blue scanning
   - Lookup Table command supported (Gamma Correction on certain scanner
     possible)
   - Scanning Frame Setting is now more intuitive
   - Reverse image scanning supported (only on certain scanners possible)
   - Accurate scanning supported. Scanning frame is now more precise.


 V1.3  25 Feb. 1996

   - Detection of new ScanMaker E3 Flatbed scanner implemented
   - Special adaption for E3 to use 8.5 * 13.5 inch scanning frame
     (due to E3 inquiry data the max frame size is 8.5 * 11.69 inch)
   - No start of the external program, if the scanning process is aborted
   - Higher dpi rates for ScanMaker 35t (slide scanner) possible
     Preview image should look better now.
   - "Main Control" window and gadgets modified
   - Debug filename "ScanTek.log" can be overriden through CLI or Tooltype


 V1.2   3 Jan. 1996

   - Debug output data revised and enhanced
   - Max Frame Setting setting introduced
   - Start of external program possible
   - Window positions are remembered and saved
   - Configuration file enhanced


 V1.1  17 Dec. 1995

   - detection of Microtek scanner via SCSI inquiry enhanced
   - stepping of resolution slider adapted to expanded base resolution
   - calculation of scanning frame size data modified


 V1.0  30 Nov. 1995

   - first public release

