/*  This is a mountlist entry for the SCSI tape handler provided with   */
/*  MRBackup. Pay particular attention to the StartUp message. Its      */
/*  format is:                                                          */
/*      "<buffer_size>/<device_name>/<unit>/<luno>/<flags>"             */
/*                                                                      */
/*  where                                                               */
/*      <buffer_size> is the total amount of buffer memory, specified   */
/*      in K (K = 1024);                                                */
/*                                                                      */
/*      <device_name> is the SCSI device driver name;                   */
/*                                                                      */
/*      <unit> is the SCSI unit number;                                 */
/*                                                                      */
/*      <luno> is the SCSI logical unit number (not currently used but  */
/*      must be set to zero);                                           */
/*                                                                      */
/*      <flags> is a set of bits controlling certain tape drive options */
/*      The bit values, which may be added together are:                */
/*                                                                      */
/*          1   asynchronous mode, 0 = synchronous mode                 */
/*          2   use on-board buffer, 0 = don't use on-board buffer      */
/*          4   Introduce 2 ms delay before each read/write. This may   */
/*              help prevent bus lockup in async mode.                  */
/*          8   Introduce 4 ms delay (additive).                        */
/*                                                                      */
/*          Example: to enable async mode and the on-board buffer, the  */
/*          <flags> value would be 3 (1 + 2).                           */
/*                                                                      */
/*          Other flag bits will be provided as new features are added. */

/* Default version of MRTape handler. */

Handler = l:mrtape-handler
StartUp = "32/scsi.device/4/0/3"
Stacksize = 6000
Priority = 5
GlobVec = -1
#
