:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: VIRUS INFORMATION BASE :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Rev. 12-01-95 HOW TO INSTALL VIP ON YOUR HARDDISK If you want to use the VIB from your harddisk, then you have do the following: 1. Copy the VIB drawer and the VIB.info files for example to your DH0: partition. 2. Take a text editor and add the following text in your harddisk s/startup-sequence: Assign Virus: DH0:VIB/Virus (contains all the texts) Assign V-IFF: DH0:VIB/V-IFF (contains all the demos) 3. If you want for example VIB installed on your DH1: partition you have to write: Assign Virus: DH1:VIB/Virus 4. Please remember, that you >>>MUST<<< have the Amigaguide.library in your Libs/dir. VIB have been succesful tested with the following library versions: Version 34.11 (62.932 bytes) Version 34.8 (62.996 bytes) Version 39.11 (24.800 bytes) Version 40.4 (22.020 bytes) IMPORTANT! Older versions will NOT...run correct!!! ------------------------------------------------ SOME LITTLE TIPS Virus Info Base have been tested at Workbench 1.3, 2.0, 2.1, 3.0, 3,1 on the following Amigas: Amiga 500, Amiga 600, Amiga CDTV, Amiga 1200, Amiga 3000, Amiga 4030, Amiga 4040. Attention please do you have the old Kickstart 1.3 you can ONLY..use the Amigaguide.library 34.xx types! The V.I.B. icon have the default to use the Amigaguide. Please attention, if you want to run "Multiview", then you have to change the V.I.B. icon as stated in the following: 1. Find the pull-down menu in the top of the screen 2. Choose the icon/information menu 3. Delete the icon default (Amigaguide) in the comment gadget and write Multiview. :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: ELS 10-10-94