@database "SwazBlanker/Pyro"
@master "Pyro.guide"
@author David Swasbrook
@(c) Copyright (C)1994 David Swasbrook. All Rights Reserved.
@$VER: Pyro.guide 1.1 (05.02.95)

@INDEX Index

@NODE MAIN "Pyro (05.02.95)"

	SWAZBLANKER : Pyro
	==================

	(C) 1992,93,94 David Swasbrook,
	     All Rights Reserved.

  @{" Introduction          " LINK Introduction		} What it actually does

  @{" Interface             " LINK Interface		} Configuration preferences

  @{" History               "	LINK History		} Bug fixes and updates


@ENDNODE


@NODE Introduction "What it actually does..."

	Pyro/Introduction
	=================

  This blanker draws fireworks explosions on the screen.

@ENDNODE


@NODE Interface "Configuration preferences..."

	Pyro/Interface
	==============

@{b}           Save @{ub}- save and use the current settings.

@{b}            Use @{ub}- use the current settings.

@{b}           Test @{ub}- test the blanker under the current settings

@{b}         Cancel @{ub}- cancel all changes.


@{b}    Max Rockets @{ub}- this sets the maximum number of rockets that may be
                  launched at the same time.
                  @{i}Default: 5.@{ui}

@{b} Explosion Size @{ub}- this sets the number of elements that make up the
                  explosion. Large values give nicer looking explosions but do
                  tend to put a bit of a strain on the CPU.
                  @{i}Default: 100.@{ui}

@{b}       Duration @{ub}- this sets how long the explosions last on screen. Low
                  values are for short period, high values for longer periods.
                  @{i}Default: 100.@{ui}

@{b}   Release Rate @{ub}- this sets how fast the rockets are released. Low values
                  result in a slow release rate, high values mean a faster
                  release rate.
                  @{i}Default: 4.@{ui}

@{b}       Big Dots @{ub}- if this is selected then the graphic pixels used to
                  draw the rockets and explosions will be four times the normal
                  size.
                  @{i}Default: Yes.@{ui}

@{b}   Display Mode @{ub}- the screen mode to use. If the preferred screen cannot
                  be opened then the default screen mode will be tried, if
                  this fails then the minimum screen mode required for this
                  blanker will be tried, if that fails then the blanker will
                  quit and let SwazBlanker choose an alternative blank
                  method.
                  @{i}Default: Lo-Resoloution, 8 Colors.@{ui}

@ENDNODE


@NODE History "Bug fixes and updates..."

	Pyro/History
	============

`1.1'	o Was not "testing" properly from the configuration window, would exit
	  straight away after displaying the title window.

`1.0'	o Aminet release

@ENDNODE


@NODE Index

	Pyro/Index
	==========

  @{" History               "	LINK History		} Bug fixes and updates
  @{" Interface             " LINK Interface		} Configuration preferences
  @{" Introduction          " LINK Introduction		} What it actually does

@ENDNODE