Go to the first, previous, next, last section, table of contents.
- MakeCD version:
-
MakeCD 2.4
- Computer:
-
A4000/040 with Oktagon 2008 SCSI, OS 3.0, IDE-Fix '97 v1.3, setpatch v43.6 (Public Beta)
- Hostadapters:
-
- Oktagon 2008 Z2 SCSI-2 (Rom v6.8), ID=1
-
Quantum SCSI Fireball TM 2110S 300N (2GB HD), ID=2
Yamaha SCSI CDR-400c v1.0d, ID=5
- AlfaQuatro 4 IDE devices Interface
-
Seagate IDE Medalist ST32140A 0.80 (2GB HD), ID=0
Toshiba IDE 4x CD-Rom XM-5302TA 1095, ID=3
- SCSI devices:
-
SoftSCSI_OktagonC9XE9.device v6.9 (31.08.95)
Reselection disabled for all devices
(Using reselection only for the CDR, causes it to hang!)
Synchron Mode disabled for all devices
- IDE devices:
-
scsi.device v107.1 (03.06.97) ("patched" by IDE-Fix)
or atapi.device v117.1 (03.06.97), both can be used.
- CD writer:
-
YAMAHA CDR400c 1.0d (MMC.driver) (this driver is named now CDR_SCSI3_ATAPI)
- CD-ROM drive:
-
TOSHIBA CD-ROM XM-5302TA 1095 (AtapiCD.driver)
- Hints:
-
- Use SoftSCSI_OktagonC9XE9.device v6.9 or higher. Also use 256 KB
Chunks and Intel Format for "Raw audio data".
- Update Yamaha CDR-400c's firmware to v1.0d. Writing to Yamaha
causes the buffer capacity to drop to 0% almost all the time!!
- Digital Audio Extraction works at all speeds (6x-4x-2x-1x).
- Writing at 4x speed should work always, except for on-the-fly
writing from HD and 4x writing with audio image files!
- Writing at 2x speed should work always.
- Writing at 1x speed should also work always.
- Only XA/Mode 2, Form 1 track types can't be written to the Yamaha,
it either just stops or keeps on blinking it's LED!
- Also copying a Mode 2 track from CD to CDR did not work! XA/Mode 2,
Form 2 & Audio (with preemphasis) are not tested.
Tested by M.L. Lie <M.L.Lie@net.HCC.nl>
.
Go to the first, previous, next, last section, table of contents.