This is Info file gdbint.info, produced by Makeinfo version 1.67 from the input file /ade-src/fsf/gdb/gdb/doc/gdbint.texinfo. START-INFO-DIR-ENTRY * Gdb-Internals: (gdbint). The GNU debugger's internals. END-INFO-DIR-ENTRY This file documents the internals of the GNU debugger GDB. Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. Contributed by Cygnus Support. Written by John Gilmore. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy or distribute modified versions of this manual under the terms of the GPL (for which purpose this text may be regarded as a program in the language TeX).  File: gdbint.info, Node: Remote Stubs, Next: Longjmp Support, Prev: Frames, Up: Top Remote Stubs ************ GDB's file `remote.c' talks a serial protocol to code that runs in the target system. GDB provides several sample "stubs" that can be integrated into target programs or operating systems for this purpose; they are named `*-stub.c'. The GDB user's manual describes how to put such a stub into your target code. What follows is a discussion of integrating the SPARC stub into a complicated operating system (rather than a simple program), by Stu Grossman, the author of this stub. The trap handling code in the stub assumes the following upon entry to trap_low: 1. %l1 and %l2 contain pc and npc respectively at the time of the trap 2. traps are disabled 3. you are in the correct trap window As long as your trap handler can guarantee those conditions, then there is no reason why you shouldn't be able to `share' traps with the stub. The stub has no requirement that it be jumped to directly from the hardware trap vector. That is why it calls `exceptionHandler()', which is provided by the external environment. For instance, this could setup the hardware traps to actually execute code which calls the stub first, and then transfers to its own trap handler. For the most point, there probably won't be much of an issue with `sharing' traps, as the traps we use are usually not used by the kernel, and often indicate unrecoverable error conditions. Anyway, this is all controlled by a table, and is trivial to modify. The most important trap for us is for `ta 1'. Without that, we can't single step or do breakpoints. Everything else is unnecessary for the proper operation of the debugger/stub. From reading the stub, it's probably not obvious how breakpoints work. They are simply done by deposit/examine operations from GDB.  File: gdbint.info, Node: Longjmp Support, Next: Coding Style, Prev: Remote Stubs, Up: Top Longjmp Support *************** GDB has support for figuring out that the target is doing a `longjmp' and for stopping at the target of the jump, if we are stepping. This is done with a few specialized internal breakpoints, which are visible in the `maint info breakpoint' command. To make this work, you need to define a macro called `GET_LONGJMP_TARGET', which will examine the `jmp_buf' structure and extract the longjmp target address. Since `jmp_buf' is target specific, you will need to define it in the appropriate `tm-xxx.h' file. Look in `tm-sun4os4.h' and `sparc-tdep.c' for examples of how to do this.  File: gdbint.info, Node: Coding Style, Next: Clean Design, Prev: Longjmp Support, Up: Top Coding Style ************ GDB is generally written using the GNU coding standards, as described in `standards.texi', which is available for anonymous FTP from GNU archive sites. There are some additional considerations for GDB maintainers that reflect the unique environment and style of GDB maintenance. If you follow these guidelines, GDB will be more consistent and easier to maintain. GDB's policy on the use of prototypes is that prototypes are used to *declare* functions but never to *define* them. Simple macros are used in the declarations, so that a non-ANSI compiler can compile GDB without trouble. The simple macro calls are used like this: extern int memory_remove_breakpoint PARAMS ((CORE_ADDR, char *)); Note the double parentheses around the parameter types. This allows an arbitrary number of parameters to be described, without freaking out the C preprocessor. When the function has no parameters, it should be described like: void noprocess PARAMS ((void)); The `PARAMS' macro expands to its argument in ANSI C, or to a simple `()' in traditional C. All external functions should have a `PARAMS' declaration in a header file that callers include. All static functions should have such a declaration near the top of their source file. We don't have a gcc option that will properly check that these rules have been followed, but it's GDB policy, and we periodically check it using the tools available (plus manual labor), and clean up any remnants.  File: gdbint.info, Node: Clean Design, Next: Submitting Patches, Prev: Coding Style, Up: Top Clean Design ************ In addition to getting the syntax right, there's the little question of semantics. Some things are done in certain ways in GDB because long experience has shown that the more obvious ways caused various kinds of trouble. In particular: * You can't assume the byte order of anything that comes from a target (including VALUEs, object files, and instructions). Such things must be byte-swapped using `SWAP_TARGET_AND_HOST' in GDB, or one of the swap routines defined in `bfd.h', such as `bfd_get_32'. * You can't assume that you know what interface is being used to talk to the target system. All references to the target must go through the current `target_ops' vector. * You can't assume that the host and target machines are the same machine (except in the "native" support modules). In particular, you can't assume that the target machine's header files will be available on the host machine. Target code must bring along its own header files - written from scratch or explicitly donated by their owner, to avoid copyright problems. * Insertion of new `#ifdef''s will be frowned upon. It's much better to write the code portably than to conditionalize it for various systems. * New `#ifdef''s which test for specific compilers or manufacturers or operating systems are unacceptable. All `#ifdef''s should test for features. The information about which configurations contain which features should be segregated into the configuration files. Experience has proven far too often that a feature unique to one particular system often creeps into other systems; and that a conditional based on some predefined macro for your current system will become worthless over time, as new versions of your system come out that behave differently with regard to this feature. * Adding code that handles specific architectures, operating systems, target interfaces, or hosts, is not acceptable in generic code. If a hook is needed at that point, invent a generic hook and define it for your configuration, with something like: #ifdef WRANGLE_SIGNALS WRANGLE_SIGNALS (signo); #endif In your host, target, or native configuration file, as appropriate, define `WRANGLE_SIGNALS' to do the machine-dependent thing. Take a bit of care in defining the hook, so that it can be used by other ports in the future, if they need a hook in the same place. If the hook is not defined, the code should do whatever "most" machines want. Using `#ifdef', as above, is the preferred way to do this, but sometimes that gets convoluted, in which case use #ifndef SPECIAL_FOO_HANDLING #define SPECIAL_FOO_HANDLING(pc, sp) (0) #endif where the macro is used or in an appropriate header file. Whether to include a "small" hook, a hook around the exact pieces of code which are system-dependent, or whether to replace a whole function with a hook depends on the case. A good example of this dilemma can be found in `get_saved_register'. All machines that GDB 2.8 ran on just needed the `FRAME_FIND_SAVED_REGS' hook to find the saved registers. Then the SPARC and Pyramid came along, and `HAVE_REGISTER_WINDOWS' and `REGISTER_IN_WINDOW_P' were introduced. Then the 29k and 88k required the `GET_SAVED_REGISTER' hook. The first three are examples of small hooks; the latter replaces a whole function. In this specific case, it is useful to have both kinds; it would be a bad idea to replace all the uses of the small hooks with `GET_SAVED_REGISTER', since that would result in much duplicated code. Other times, duplicating a few lines of code here or there is much cleaner than introducing a large number of small hooks. Another way to generalize GDB along a particular interface is with an attribute struct. For example, GDB has been generalized to handle multiple kinds of remote interfaces - not by #ifdef's everywhere, but by defining the "target_ops" structure and having a current target (as well as a stack of targets below it, for memory references). Whenever something needs to be done that depends on which remote interface we are using, a flag in the current target_ops structure is tested (e.g. `target_has_stack'), or a function is called through a pointer in the current target_ops structure. In this way, when a new remote interface is added, only one module needs to be touched - the one that actually implements the new remote interface. Other examples of attribute-structs are BFD access to multiple kinds of object file formats, or GDB's access to multiple source languages. Please avoid duplicating code. For example, in GDB 3.x all the code interfacing between `ptrace' and the rest of GDB was duplicated in `*-dep.c', and so changing something was very painful. In GDB 4.x, these have all been consolidated into `infptrace.c'. `infptrace.c' can deal with variations between systems the same way any system-independent file would (hooks, #if defined, etc.), and machines which are radically different don't need to use infptrace.c at all. * *Do* write code that doesn't depend on the sizes of C data types, the format of the host's floating point numbers, the alignment of anything, or the order of evaluation of expressions. In short, follow good programming practices for writing portable C code.  File: gdbint.info, Node: Submitting Patches, Next: Host Conditionals, Prev: Clean Design, Up: Top Submitting Patches ****************** Thanks for thinking of offering your changes back to the community of GDB users. In general we like to get well designed enhancements. Thanks also for checking in advance about the best way to transfer the changes. The two main problems with getting your patches in are, * The GDB maintainers will only install "cleanly designed" patches. You may not always agree on what is clean design. *note Coding Style::., *note Clean Design::.. * If the maintainers don't have time to put the patch in when it arrives, or if there is any question about a patch, it goes into a large queue with everyone else's patches and bug reports. I don't know how to get past these problems except by continuing to try. There are two issues here - technical and legal. The legal issue is that to incorporate substantial changes requires a copyright assignment from you and/or your employer, granting ownership of the changes to the Free Software Foundation. You can get the standard document for doing this by sending mail to `gnu@prep.ai.mit.edu' and asking for it. I recommend that people write in "All programs owned by the Free Software Foundation" as "NAME OF PROGRAM", so that changes in many programs (not just GDB, but GAS, Emacs, GCC, etc) can be contributed with only one piece of legalese pushed through the bureacracy and filed with the FSF. I can't start merging changes until this paperwork is received by the FSF (their rules, which I follow since I maintain it for them). Technically, the easiest way to receive changes is to receive each feature as a small context diff or unidiff, suitable for "patch". Each message sent to me should include the changes to C code and header files for a single feature, plus ChangeLog entries for each directory where files were modified, and diffs for any changes needed to the manuals (gdb/doc/gdb.texi or gdb/doc/gdbint.texi). If there are a lot of changes for a single feature, they can be split down into multiple messages. In this way, if I read and like the feature, I can add it to the sources with a single patch command, do some testing, and check it in. If you leave out the ChangeLog, I have to write one. If you leave out the doc, I have to puzzle out what needs documenting. Etc. The reason to send each change in a separate message is that I will not install some of the changes. They'll be returned to you with questions or comments. If I'm doing my job, my message back to you will say what you have to fix in order to make the change acceptable. The reason to have separate messages for separate features is so that other changes (which I *am* willing to accept) can be installed while one or more changes are being reworked. If multiple features are sent in a single message, I tend to not put in the effort to sort out the acceptable changes from the unacceptable, so none of the features get installed until all are acceptable. If this sounds painful or authoritarian, well, it is. But I get a lot of bug reports and a lot of patches, and most of them don't get installed because I don't have the time to finish the job that the bug reporter or the contributor could have done. Patches that arrive complete, working, and well designed, tend to get installed on the day they arrive. The others go into a queue and get installed if and when I scan back over the queue - which can literally take months sometimes. It's in both our interests to make patch installation easy - you get your changes installed, and I make some forward progress on GDB in a normal 12-hour day (instead of them having to wait until I have a 14-hour or 16-hour day to spend cleaning up patches before I can install them). Please send patches to `bug-gdb@prep.ai.mit.edu', if they are less than about 25,000 characters. If longer than that, either make them available somehow (e.g. anonymous FTP), and announce it on `bug-gdb', or send them directly to the GDB maintainers at `gdb-patches@cygnus.com'.  File: gdbint.info, Node: Host Conditionals, Next: Target Conditionals, Prev: Submitting Patches, Up: Top Host Conditionals ***************** When GDB is configured and compiled, various macros are defined or left undefined, to control compilation based on the attributes of the host system. These macros and their meanings (or if the meaning is not documented here, then one of the source files where they are used is indicated) are: *NOTE: For now, both host and target conditionals are here. Eliminate target conditionals from this list as they are identified.* `BLOCK_ADDRESS_FUNCTION_RELATIVE' dbxread.c `GDBINIT_FILENAME' The default name of GDB's initialization file (normally `.gdbinit'). `MEM_FNS_DECLARED' Your host config file defines this if it includes declarations of `memcpy' and `memset'. Define this to avoid conflicts between the native include files and the declarations in `defs.h'. `NO_SYS_FILE' Define this if your system does not have a `'. `SIGWINCH_HANDLER' If your host defines `SIGWINCH', you can define this to be the name of a function to be called if `SIGWINCH' is received. `SIGWINCH_HANDLER_BODY' Define this to expand into code that will define the function named by the expansion of `SIGWINCH_HANDLER'. `ADDITIONAL_OPTIONS' main.c `ADDITIONAL_OPTION_CASES' main.c `ADDITIONAL_OPTION_HANDLER' main.c `ADDITIONAL_OPTION_HELP' main.c `AIX_BUGGY_PTRACE_CONTINUE' infptrace.c `ALIGN_STACK_ON_STARTUP' Define this if your system is of a sort that will crash in `tgetent' if the stack happens not to be longword-aligned when `main' is called. This is a rare situation, but is known to occur on several different types of systems. `CFRONT_PRODUCER' dwarfread.c `DBX_PARM_SYMBOL_CLASS' stabsread.c `DEFAULT_PROMPT' The default value of the prompt string (normally `"(gdb) "'). `DEV_TTY' symmisc.c `DO_REGISTERS_INFO' infcmd.c `FCLOSE_PROVIDED' Define this if the system declares `fclose' in the headers included in `defs.h'. This isn't needed unless your compiler is unusually anal. ANSI definition. `FILES_INFO_HOOK' target.c `FLOAT_INFO' infcmd.c `FOPEN_RB' Define this if binary files are opened the same way as text files. `GCC2_COMPILED_FLAG_SYMBOL' dbxread.c `GCC_COMPILED_FLAG_SYMBOL' dbxread.c `GCC_MANGLE_BUG' symtab.c `GCC_PRODUCER' dwarfread.c `GETENV_PROVIDED' Define this if the system declares `getenv' in its headers included in `defs.h'. This isn't needed unless your compiler is unusually anal. `GPLUS_PRODUCER' dwarfread.c `HAVE_MMAP' In some cases, use the system call `mmap' for reading symbol tables. For some machines this allows for sharing and quick updates. `HAVE_SIGSETMASK' Define this if the host system has job control, but does not define `sigsetmask()'. Currently, this is only true of the RS/6000. `HAVE_TERMIO' inflow.c `HOST_BYTE_ORDER' The ordering of bytes in the host. This must be defined to be either `BIG_ENDIAN' or `LITTLE_ENDIAN'. `INT_MAX' `INT_MIN' `LONG_MAX' `UINT_MAX' `ULONG_MAX' Values for host-side constants. `ISATTY' Substitute for isatty, if not available. `KERNEL_DEBUGGING' tm-ultra3.h `KERNEL_U_ADDR' Define this to the address of the `u' structure (the "user struct", also known as the "u-page") in kernel virtual memory. GDB needs to know this so that it can subtract this address from absolute addresses in the upage, that are obtained via ptrace or from core files. On systems that don't need this value, set it to zero. `KERNEL_U_ADDR_BSD' Define this to cause GDB to determine the address of `u' at runtime, by using Berkeley-style `nlist' on the kernel's image in the root directory. `KERNEL_U_ADDR_HPUX' Define this to cause GDB to determine the address of `u' at runtime, by using HP-style `nlist' on the kernel's image in the root directory. `LCC_PRODUCER' dwarfread.c `LONGEST' This is the longest integer type available on the host. If not defined, it will default to `long long' or `long', depending on `CC_HAS_LONG_LONG'. `CC_HAS_LONG_LONG' Define this if the host C compiler supports "long long". This will be defined automatically if GNU CC is used to compile GDB. `PRINTF_HAS_LONG_LONG' Define this if the host can handle printing of long long integers via a format directive "ll". `LSEEK_NOT_LINEAR' source.c `L_LNNO32' coffread.c `L_SET' This macro is used as the argument to lseek (or, most commonly, bfd_seek). FIXME, should be replaced by SEEK_SET instead, which is the POSIX equivalent. `MAINTENANCE_CMDS' If the value of this is 1, then a number of optional maintenance commands are compiled in. `MALLOC_INCOMPATIBLE' Define this if the system's prototype for `malloc' differs from the ANSI definition. `MMAP_BASE_ADDRESS' When using HAVE_MMAP, the first mapping should go at this address. `MMAP_INCREMENT' when using HAVE_MMAP, this is the increment between mappings. `NEED_POSIX_SETPGID' Define this to use the POSIX version of `setpgid' to determine whether job control is available. `NORETURN' If defined, this should be one or more tokens, such as `volatile', that can be used in both the declaration and definition of functions to indicate that they never return. The default is already set correctly if compiling with GCC. This will almost never need to be defined. `ATTR_NORETURN' If defined, this should be one or more tokens, such as `__attribute__ ((noreturn))', that can be used in the declarations of functions to indicate that they never return. The default is already set correctly if compiling with GCC. This will almost never need to be defined. `NOTICE_SIGNAL_HANDLING_CHANGE' infrun.c `NO_HIF_SUPPORT' remote-mm.c `NO_JOB_CONTROL' signals.h `NO_MMALLOC' GDB will use the `mmalloc' library for memory allocation for symbol reading, unless this symbol is defined. Define it on systems on which `mmalloc' does not work for some reason. One example is the DECstation, where its RPC library can't cope with our redefinition of `malloc' to call `mmalloc'. When defining `NO_MMALLOC', you will also have to override the setting of `MMALLOC_LIB' to empty, in the Makefile. Therefore, this define is usually set on the command line by overriding `MMALLOC_DISABLE' in `config/*/*.mh', rather than by defining it in `xm-*.h'. `NO_MMALLOC_CHECK' Define this if you are using `mmalloc', but don't want the overhead of checking the heap with `mmcheck'. `NO_SIGINTERRUPT' remote-adapt.c `NUMERIC_REG_NAMES' mips-tdep.c `N_SETV' dbxread.c `N_SET_MAGIC' hppabsd-tdep.c `ONE_PROCESS_WRITETEXT' breakpoint.c `O_BINARY' exec.c `O_RDONLY' xm-ultra3.h `PCC_SOL_BROKEN' dbxread.c `PC_LOAD_SEGMENT' stack.c `PRINT_RANDOM_SIGNAL' infcmd.c `PRINT_REGISTER_HOOK' infcmd.c `PROCESS_LINENUMBER_HOOK' buildsym.c `PROLOGUE_FIRSTLINE_OVERLAP' infrun.c `PUSH_ARGUMENTS' valops.c `PYRAMID_CONTROL_FRAME_DEBUGGING' pyr-xdep.c `PYRAMID_CORE' pyr-xdep.c `PYRAMID_PTRACE' pyr-xdep.c `REGISTER_BYTES' remote.c `REG_STACK_SEGMENT' exec.c `REG_STRUCT_HAS_ADDR' findvar.c `R_FP' dwarfread.c `R_OK' xm-altos.h `SEEK_END' state.c `SEEK_SET' state.c `SEM' coffread.c `SHELL_COMMAND_CONCAT' infrun.c `SHELL_FILE' infrun.c `SHIFT_INST_REGS' breakpoint.c `SIGTRAP_STOP_AFTER_LOAD' infrun.c `STACK_ALIGN' valops.c `STOP_SIGNAL' main.c `SUN4_COMPILER_FEATURE' infrun.c `SUN_FIXED_LBRAC_BUG' dbxread.c `SVR4_SHARED_LIBS' solib.c `SYMBOL_RELOADING_DEFAULT' symfile.c `TIOCGETC' inflow.c `TIOCGLTC' inflow.c `TIOCGPGRP' inflow.c `TIOCLGET' inflow.c `TIOCLSET' inflow.c `TIOCNOTTY' inflow.c `UPAGES' altos-xdep.c `USE_O_NOCTTY' inflow.c `USG' Means that System V (prior to SVR4) include files are in use. (FIXME: This symbol is abused in `infrun.c', `regex.c', `remote-nindy.c', and `utils.c' for other things, at the moment.) `WRS_ORIG' remote-vx.c `alloca' defs.h `const' defs.h `lint' Define this to help lint in some stupid way. `volatile' Define this to override the defaults of `__volatile__' or `/**/'. Platform-specific host conditionals. `ALTOS' altos-xdep.c `ALTOS_AS' xm-altos.h `MOTOROLA' xm-altos.h `NBPG' altos-xdep.c `BCS' tm-delta88.h `DELTA88' m88k-xdep.c `DGUX' m88k-xdep.c `F_OK' xm-ultra3.h Regex conditionals. `C_ALLOCA' regex.c `NFAILURES' regex.c `RE_NREGS' regex.h `SIGN_EXTEND_CHAR' regex.c `SWITCH_ENUM_BUG' regex.c `SYNTAX_TABLE' regex.c `Sword' regex.c `sparc' regex.c `test' regex.c  File: gdbint.info, Node: Target Conditionals, Next: Native Conditionals, Prev: Host Conditionals, Up: Top Target Conditionals ******************* When GDB is configured and compiled, various macros are defined or left undefined, to control compilation based on the attributes of the target system. These macros and their meanings are: *NOTE: For now, both host and target conditionals are here. Eliminate host conditionals from this list as they are identified.* `PUSH_DUMMY_FRAME' Used in `call_function_by_hand' to create an artificial stack frame. `POP_FRAME' Used in `call_function_by_hand' to remove an artificial stack frame. `BLOCK_ADDRESS_FUNCTION_RELATIVE' dbxread.c `PYRAMID_CONTROL_FRAME_DEBUGGING' pyr-xdep.c `ADDITIONAL_OPTIONS' main.c `ADDITIONAL_OPTION_CASES' main.c `ADDITIONAL_OPTION_HANDLER' main.c `ADDITIONAL_OPTION_HELP' main.c `ADDR_BITS_REMOVE (addr)' If a raw machine address includes any bits that are not really part of the address, then define this macro to expand into an expression that zeros those bits in ADDR. For example, the two low-order bits of a Motorola 88K address may be used by some kernels for their own purposes, since addresses must always be 4-byte aligned, and so are of no use for addressing. Those bits should be filtered out with an expression such as `((addr) & ~3)'. `ALIGN_STACK_ON_STARTUP' main.c `ALTOS' altos-xdep.c `ALTOS_AS' xm-altos.h `BCS' tm-delta88.h `BEFORE_MAIN_LOOP_HOOK' Define this to expand into any code that you want to execute before the main loop starts. Although this is not, strictly speaking, a target conditional, that is how it is currently being used. Note that if a configuration were to define it one way for a host and a different way for the target, GDB will probably not compile, let alone run correctly. `BELIEVE_PCC_PROMOTION' coffread.c `BELIEVE_PCC_PROMOTION_TYPE' stabsread.c `BITS_BIG_ENDIAN' Define this if the numbering of bits in the targets does *not* match the endianness of the target byte order. A value of 1 means that the bits are numbered in a big-endian order, 0 means little-endian. `BLOCK_ADDRESS_ABSOLUTE' dbxread.c `BREAKPOINT' tm-m68k.h `CALL_DUMMY' valops.c `CALL_DUMMY_LOCATION' inferior.h `CALL_DUMMY_STACK_ADJUST' valops.c `CANNOT_FETCH_REGISTER (regno)' A C expression that should be nonzero if REGNO cannot be fetched from an inferior process. This is only relevant if `FETCH_INFERIOR_REGISTERS' is not defined. `CANNOT_STORE_REGISTER (regno)' A C expression that should be nonzero if REGNO should not be written to the target. This is often the case for program counters, status words, and other special registers. If this is not defined, GDB will assume that all registers may be written. `CFRONT_PRODUCER' dwarfread.c `DO_DEFERRED_STORES' `CLEAR_DEFERRED_STORES' Define this to execute any deferred stores of registers into the inferior, and to cancel any deferred stores. Currently only implemented correctly for native Sparc configurations? `CPLUS_MARKER' Define this to expand into the character that G++ uses to distinguish compiler-generated identifiers from programmer-specified identifiers. By default, this expands into `'$''. Most System V targets should define this to `'.''. `DBX_PARM_SYMBOL_CLASS' stabsread.c `DECR_PC_AFTER_BREAK' Define this to be the amount by which to decrement the PC after the program encounters a breakpoint. This is often the number of bytes in BREAKPOINT, though not always. For most targets this value will be 0. `DECR_PC_AFTER_HW_BREAK' Similarly, for hardware breakpoints. `DELTA88' m88k-xdep.c `DEV_TTY' symmisc.c `DGUX' m88k-xdep.c `DISABLE_UNSETTABLE_BREAK addr' If defined, this should evaluate to 1 if ADDR is in a shared library in which breakpoints cannot be set and so should be disabled. `DO_REGISTERS_INFO' infcmd.c `END_OF_TEXT_DEFAULT' This is an expression that should designate the end of the text section (? FIXME ?) `EXTRACT_RETURN_VALUE' tm-m68k.h `EXTRACT_STRUCT_VALUE_ADDRESS' values.c `EXTRA_FRAME_INFO' If defined, this must be a list of slots that may be inserted into the `frame_info' structure defined in `frame.h'. `EXTRA_SYMTAB_INFO' If defined, this must be a list of slots that may be inserted into the `symtab' structure defined in `symtab.h'. `FILES_INFO_HOOK' target.c `FLOAT_INFO' infcmd.c `FP0_REGNUM' a68v-xdep.c `FPC_REGNUM' mach386-xdep.c `FP_REGNUM' parse.c `FRAMELESS_FUNCTION_INVOCATION' blockframe.c `FRAME_ARGS_ADDRESS_CORRECT' stack.c `FRAME_CHAIN' Given FRAME, return a pointer to the calling frame. `FRAME_CHAIN_COMBINE' blockframe.c `FRAME_CHAIN_VALID' frame.h `FRAME_CHAIN_VALID_ALTERNATE' frame.h `FRAME_FIND_SAVED_REGS' stack.c `FRAME_GET_BASEREG_VALUE' frame.h `FRAME_NUM_ARGS (val, fi)' For the frame described by fi, set val to the number of arguments that are being passed. `FRAME_SPECIFICATION_DYADIC' stack.c `FRAME_SAVED_PC' Given FRAME, return the pc saved there. That is, the return address. `FUNCTION_EPILOGUE_SIZE' For some COFF targets, the `x_sym.x_misc.x_fsize' field of the function end symbol is 0. For such targets, you must define `FUNCTION_EPILOGUE_SIZE' to expand into the standard size of a function's epilogue. `GCC2_COMPILED_FLAG_SYMBOL' dbxread.c `GCC_COMPILED_FLAG_SYMBOL' dbxread.c `GCC_MANGLE_BUG' symtab.c `GCC_PRODUCER' dwarfread.c `GDB_TARGET_IS_HPPA' This determines whether horrible kludge code in dbxread.c and partial-stab.h is used to mangle multiple-symbol-table files from HPPA's. This should all be ripped out, and a scheme like elfread.c used. `GDB_TARGET_IS_MACH386' mach386-xdep.c `GDB_TARGET_IS_SUN3' a68v-xdep.c `GDB_TARGET_IS_SUN386' sun386-xdep.c `GET_LONGJMP_TARGET' For most machines, this is a target-dependent parameter. On the DECstation and the Iris, this is a native-dependent parameter, since is needed to define it. This macro determines the target PC address that longjmp() will jump to, assuming that we have just stopped at a longjmp breakpoint. It takes a CORE_ADDR * as argument, and stores the target PC value through this pointer. It examines the current state of the machine as needed. `GET_SAVED_REGISTER' Define this if you need to supply your own definition for the function `get_saved_register'. Currently this is only done for the a29k. `GPLUS_PRODUCER' dwarfread.c `GR64_REGNUM' Very a29k-specific. `HAVE_REGISTER_WINDOWS' Define this if the target has register windows. `REGISTER_IN_WINDOW_P regnum' Define this to be an expression that is 1 is the given register is in the window. `IBM6000_TARGET' Shows that we are configured for an IBM RS/6000 target. This conditional should be eliminated (FIXME) and replaced by feature-specific macros. It was introduced in haste and we are repenting at leisure. `IEEE_FLOAT' Define this if the target system uses IEEE-format floating point numbers. `IGNORE_SYMBOL type' This seems to be no longer used. `INIT_EXTRA_FRAME_INFO (fromleaf, fci)' If defined, this should be a C expression or statement that fills in the `EXTRA_FRAME_INFO' slots of the given frame FCI. `INIT_EXTRA_SYMTAB_INFO' symfile.c `INIT_FRAME_PC (fromleaf, prev)' This is a C statement that sets the pc of the frame pointed to by PREV. [By default...] `INNER_THAN' Define this to be either `<' if the target's stack grows downward in memory, or `>' is the stack grows upwards. `IN_SIGTRAMP pc name' Define this to return true if the given pc and/or name indicates that the current function is a sigtramp. `SIGTRAMP_START' `SIGTRAMP_END' Define these to be the start and end address of the sigtramp. These will be used if defined, and `IN_SIGTRAMP' is not; otherwise the name of the sigtramp will be assumed to be `_sigtramp'. `IN_SOLIB_TRAMPOLINE pc name' Define this to evaluate to nonzero if the program is stopped in the trampoline that connects to a shared library. `IS_TRAPPED_INTERNALVAR name' This is an ugly hook to allow the specification of special actions that should occur as a side-effect of setting the value of a variable internal to GDB. Currently only used by the h8500. Note that this could be either a host or target conditional. `KERNEL_DEBUGGING' tm-ultra3.h `LCC_PRODUCER' dwarfread.c `L_LNNO32' coffread.c `MIPSEL' mips-tdep.c `MOTOROLA' xm-altos.h `NBPG' altos-xdep.c `NEED_TEXT_START_END' Define this if GDB should determine the start and end addresses of the text section. (Seems dubious.) `NOTICE_SIGNAL_HANDLING_CHANGE' infrun.c `NO_HIF_SUPPORT' remote-mm.c `NO_SIGINTERRUPT' remote-adapt.c `NO_SINGLE_STEP' Define this if the target does not support single-stepping. If this is defined, you must supply, in `*-tdep.c', the function `single_step', which takes a pid as argument and returns nothing. It must insert breakpoints at each possible destinations of the next instruction. See `sparc-tdep.c' and `rs6000-tdep.c' for examples. `NUMERIC_REG_NAMES' mips-tdep.c `N_SETV' dbxread.c `N_SET_MAGIC' hppabsd-tdep.c `ONE_PROCESS_WRITETEXT' breakpoint.c `PCC_SOL_BROKEN' dbxread.c `PC_IN_CALL_DUMMY' inferior.h `PC_LOAD_SEGMENT' stack.c `PC_REGNUM' If the program counter is kept in a register, then define this macro to be the number of that register. This need be defined only if `TARGET_WRITE_PC' is not defined. `NPC_REGNUM' The number of the "next program counter" register, if defined. `NNPC_REGNUM' The number of the "next next program counter" register, if defined. Currently, this is only defined for the Motorola 88K. `PRINT_RANDOM_SIGNAL' infcmd.c `PRINT_REGISTER_HOOK' infcmd.c `PRINT_TYPELESS_INTEGER' This is an obscure substitute for `print_longest' that seems to have been defined for the Convex target. `PROCESS_LINENUMBER_HOOK' buildsym.c `PROLOGUE_FIRSTLINE_OVERLAP' infrun.c `PS_REGNUM' parse.c `PUSH_ARGUMENTS' valops.c `REGISTER_BYTES' remote.c `REGISTER_NAMES' Define this to expand into an initializer of an array of strings. Each string is the name of a register. [more detail] `REG_STACK_SEGMENT' exec.c `REG_STRUCT_HAS_ADDR' findvar.c `R_FP' dwarfread.c `R_OK' xm-altos.h `SDB_REG_TO_REGNUM' Define this to convert sdb register numbers into GDB regnums. If not defined, no conversion will be done. `SEEK_END' state.c `SEEK_SET' state.c `SEM' coffread.c `SHELL_COMMAND_CONCAT' infrun.c `SHELL_FILE' infrun.c `SHIFT_INST_REGS' breakpoint.c `SIGTRAP_STOP_AFTER_LOAD' infrun.c `SKIP_PROLOGUE' A C statement that advances the PC across any function entry prologue instructions so as to reach "real" code. `SKIP_PROLOGUE_FRAMELESS_P' A C statement that should behave similarly, but that can stop as soon as the function is known to have a frame. If not defined, `SKIP_PROLOGUE' will be used instead. `SKIP_TRAMPOLINE_CODE (pc)' If the target machine has trampoline code that sits between callers and the functions being called, then define this macro to return a new PC that is at the start of the real function. `SP_REGNUM' parse.c `STAB_REG_TO_REGNUM' Define this to convert stab register numbers (as gotten from `r' declarations) into GDB regnums. If not defined, no conversion will be done. `STACK_ALIGN' valops.c `STOP_SIGNAL' main.c `STORE_RETURN_VALUE (type, valbuf)' A C expression that stores a function return value of type TYPE, where VALBUF is the address of the value to be stored. `SUN4_COMPILER_FEATURE' infrun.c `SUN_FIXED_LBRAC_BUG' dbxread.c `SVR4_SHARED_LIBS' solib.c `SYMBOL_RELOADING_DEFAULT' symfile.c `TARGET_BYTE_ORDER' The ordering of bytes in the target. This must be defined to be either `BIG_ENDIAN' or `LITTLE_ENDIAN'. `TARGET_CHAR_BIT' Number of bits in a char; defaults to 8. `TARGET_COMPLEX_BIT' Number of bits in a complex number; defaults to `2 * TARGET_FLOAT_BIT'. `TARGET_DOUBLE_BIT' Number of bits in a double float; defaults to `8 * TARGET_CHAR_BIT'. `TARGET_DOUBLE_COMPLEX_BIT' Number of bits in a double complex; defaults to `2 * TARGET_DOUBLE_BIT'. `TARGET_FLOAT_BIT' Number of bits in a float; defaults to `4 * TARGET_CHAR_BIT'. `TARGET_INT_BIT' Number of bits in an integer; defaults to `4 * TARGET_CHAR_BIT'. `TARGET_LONG_BIT' Number of bits in a long integer; defaults to `4 * TARGET_CHAR_BIT'. `TARGET_LONG_DOUBLE_BIT' Number of bits in a long double float; defaults to `2 * TARGET_DOUBLE_BIT'. `TARGET_LONG_LONG_BIT' Number of bits in a long long integer; defaults to `2 * TARGET_LONG_BIT'. `TARGET_PTR_BIT' Number of bits in a pointer; defaults to `TARGET_INT_BIT'. `TARGET_SHORT_BIT' Number of bits in a short integer; defaults to `2 * TARGET_CHAR_BIT'. `TARGET_READ_PC' `TARGET_WRITE_PC (val, pid)' `TARGET_READ_SP' `TARGET_WRITE_SP' `TARGET_READ_FP' `TARGET_WRITE_FP' These change the behavior of `read_pc', `write_pc', `read_sp', `write_sp', `read_fp' and `write_fp'. For most targets, these may be left undefined. GDB will call the read and write register functions with the relevant `_REGNUM' argument. These macros are useful when a target keeps one of these registers in a hard to get at place; for example, part in a segment register and part in an ordinary register. `USE_STRUCT_CONVENTION (gcc_p, type)' If defined, this must be an expression that is nonzero if a value of the given TYPE being returned from a function must have space allocated for it on the stack. GCC_P is true if the function being considered is known to have been compiled by GCC; this is helpful for systems where GCC is known to use different calling convention than other compilers. `VARIABLES_INSIDE_BLOCK (desc, gcc_p)' For dbx-style debugging information, if the compiler puts variable declarations inside LBRAC/RBRAC blocks, this should be defined to be nonzero. DESC is the value of `n_desc' from the `N_RBRAC' symbol, and GCC_P is true if GDB has noticed the presence of either the `GCC_COMPILED_SYMBOL' or the `GCC2_COMPILED_SYMBOL'. By default, this is 0. `OS9K_VARIABLES_INSIDE_BLOCK (desc, gcc_p)' Similarly, for OS/9000. Defaults to 1. `WRS_ORIG' remote-vx.c `test' (Define this to enable testing code in regex.c.) Motorola M68K target conditionals. `BPT_VECTOR' Define this to be the 4-bit location of the breakpoint trap vector. If not defined, it will default to `0xf'. `REMOTE_BPT_VECTOR' Defaults to `1'.  File: gdbint.info, Node: Native Conditionals, Next: Obsolete Conditionals, Prev: Target Conditionals, Up: Top Native Conditionals ******************* When GDB is configured and compiled, various macros are defined or left undefined, to control compilation when the host and target systems are the same. These macros should be defined (or left undefined) in `nm-SYSTEM.h'. `ATTACH_DETACH' If defined, then GDB will include support for the `attach' and `detach' commands. `CHILD_PREPARE_TO_STORE' If the machine stores all registers at once in the child process, then define this to ensure that all values are correct. This usually entails a read from the child. [Note that this is incorrectly defined in `xm-SYSTEM.h' files currently.] `FETCH_INFERIOR_REGISTERS' Define this if the native-dependent code will provide its own routines `fetch_inferior_registers' and `store_inferior_registers' in `HOST-nat.c'. If this symbol is *not* defined, and `infptrace.c' is included in this configuration, the default routines in `infptrace.c' are used for these functions. `GET_LONGJMP_TARGET' For most machines, this is a target-dependent parameter. On the DECstation and the Iris, this is a native-dependent parameter, since is needed to define it. This macro determines the target PC address that longjmp() will jump to, assuming that we have just stopped at a longjmp breakpoint. It takes a CORE_ADDR * as argument, and stores the target PC value through this pointer. It examines the current state of the machine as needed. `PROC_NAME_FMT' Defines the format for the name of a `/proc' device. Should be defined in `nm.h' *only* in order to override the default definition in `procfs.c'. `PTRACE_FP_BUG' mach386-xdep.c `PTRACE_ARG3_TYPE' The type of the third argument to the `ptrace' system call, if it exists and is different from `int'. `REGISTER_U_ADDR' Defines the offset of the registers in the "u area"; *note Host::.. `SOLIB_ADD (filename, from_tty, targ)' Define this to expand into an expression that will cause the symbols in FILENAME to be added to GDB's symbol table. `SOLIB_CREATE_INFERIOR_HOOK' Define this to expand into any shared-library-relocation code that you want to be run just after the child process has been forked. `START_INFERIOR_TRAPS_EXPECTED' When starting an inferior, GDB normally expects to trap twice; once when the shell execs, and once when the program itself execs. If the actual number of traps is something other than 2, then define this macro to expand into the number expected. `USE_PROC_FS' This determines whether small routines in `*-tdep.c', which translate register values between GDB's internal representation and the /proc representation, are compiled. `U_REGS_OFFSET' This is the offset of the registers in the upage. It need only be defined if the generic ptrace register access routines in `infptrace.c' are being used (that is, `infptrace.c' is configured in, and `FETCH_INFERIOR_REGISTERS' is not defined). If the default value from `infptrace.c' is good enough, leave it undefined. The default value means that u.u_ar0 *points to* the location of the registers. I'm guessing that `#define U_REGS_OFFSET 0' means that u.u_ar0 *is* the location of the registers. `CLEAR_SOLIB' objfiles.c `DEBUG_PTRACE' Define this to debug ptrace calls.  File: gdbint.info, Node: Obsolete Conditionals, Next: XCOFF, Prev: Native Conditionals, Up: Top Obsolete Conditionals ********************* Fragments of old code in GDB sometimes reference or set the following configuration macros. They should not be used by new code, and old uses should be removed as those parts of the debugger are otherwise touched. `STACK_END_ADDR' This macro used to define where the end of the stack appeared, for use in interpreting core file formats that don't record this address in the core file itself. This information is now configured in BFD, and GDB gets the info portably from there. The values in GDB's configuration files should be moved into BFD configuration files (if needed there), and deleted from all of GDB's config files. Any `FOO-xdep.c' file that references STACK_END_ADDR is so old that it has never been converted to use BFD. Now that's old!  File: gdbint.info, Node: XCOFF, Prev: Obsolete Conditionals, Up: Top The XCOFF Object File Format **************************** The IBM RS/6000 running AIX uses an object file format called xcoff. The COFF sections, symbols, and line numbers are used, but debugging symbols are dbx-style stabs whose strings are located in the `.debug' section (rather than the string table). For more information, *Note Top: (stabs)Top, and search for XCOFF. The shared library scheme has a nice clean interface for figuring out what shared libraries are in use, but the catch is that everything which refers to addresses (symbol tables and breakpoints at least) needs to be relocated for both shared libraries and the main executable. At least using the standard mechanism this can only be done once the program has been run (or the core file has been read).