Syntax12.Scn.Fnt ZParcElemsAlloc Syntax14b.Scn.FntSyntax10.Scn.FntaR Syntax12b.Scn.FntSyntax12i.Scn.Fnt  AK0uLineElemsAlloc   AK' / S ZP r Z 2!P   ZP < Z  Z W$  ZP XX~oQ$ x2 #%R%4/H ,  Z u ZP  Z  ZP 'K Z u ZP 'Lk ZG ZP  Z  ZP ' Z    0 ZP ' pR  ^0 9 @,D Z l >/W ZP 'G>_ X Z  y ZP 'E@E  Z  ZP  Z /Syntax12m.Scn.Fnt g ZP 'qw $] Z K ZP  Z  ZP ' Z o ZP   Z  `S tM0u 4v @@TableElemsAllocCSyntax10.Scn.Fnt?Syntax10i.Scn.FntH/left 0/right 0/nohead "*"/noline "*"/col "LL"/table /columns string G@@SSyntax10.Scn.Fnt ZParcElemsAllocfg/left 0/right 0/nohead "*"/noline "*"/col "LL"/table control column formatting string = {L|C|R|N|-}. ,  SSyntax10.Scn.FntParcElemsAlloc/left 0/right 0/nohead "*"/noline "*"/col "LL"/table L left flush C centered R right flush N numeric (period adjusted) - default  tM'y @@CSyntax10.Scn.Fnt<Syntax10i.Scn.FntE/left 0/right 0/nohead "*"/noline "*"/col "LL"/table /rows string J9@@SSyntax10.Scn.Fnt ZParcElemsAlloccd/left 0/right 0/nohead "*"/noline "*"/col "LL"/table control row formatting string = {B|L|C|T|-}. 69 SSyntax10.Scn.Fnt ZParcElemsAllocwx/left 0/right 0/nohead "*"/noline "*"/col "LL"/table B bottom flush L common baseline C centered T top flush - default  tM'w CSyntax10.Scn.Fnt?Syntax10i.Scn.FntG/left 0/right 0/nohead "*"/noline "*"/col "LL"/table /noheads string OzSSyntax10.Scn.Fnt ZParcElemsAlloc^_/left 0/right 0/nohead "*"/noline "*"/col "LL"/table turn header lines off string = {H|V |*}. Z @@SSyntax10.Scn.Fnt ZParcElemsAllocST/left 0/right 0/nohead "*"/noline "*"/col "LL"/table H horizontal V vertical * all  tM'u CSyntax10.Scn.Fnt?Syntax10i.Scn.FntI/left 0/right 0/nohead "*"/noline "*"/col "LL"/table /nolines string B9 SSyntax10.Scn.Fnt ZParcElemsAllockl/left 0/right 0/nohead "*"/noline "*"/col "LL"/table turn separation lines off string = {L|R|B|T|H|V|*}. @SSyntax10.Scn.Fnt ZParcElemsAlloc/left 0/right 0/nohead "*"/noline "*"/col "LL"/table L left frame R right frame B bottom frame T top frame H horizontal separation V vertical separation * all  tM' Syntax10.Scn.Fnt ZParcElemsAlloc5Syntax10i.Scn.Fnt  /left 0/right 0/nohead "*"/noline "*"/table /period string /left integer /right integer /bottom integer /top integer /grid integer @waSyntax10.Scn.Fnt ZParcElemsAlloc/left 0/right 0/nohead "*"/noline "*"/table first char redefines period (e.g. ",") left cell margin right cell margin bottom cell margin top cell margin cell width grid *)  tM0u `S  ZP i>cDocumentation of Text Elements Last Update: 1 Oct 93 (M. Hausner, Ed.) Changed and Updated for O4A: 18 March 96 (R. Degner) Table of Contents Element Class Author Last Update  Clock R. Griesemer 28 Sept 93 Dialogs M. Knasmller Directory H. Mssenbck Error C. Szyperski 28 Sept 93 Fold H. Mssenbck Graphic C. Szyperski 27 Sept 93 Icon R. Griesemer 1 Oct 93 Info C. Steindl Line C. Szyperski 28 Sept 93 Link H. Mssenbck Mark H. Mssenbck Index M. Hof Menu N. Wirth 16 Sept 93 Picture H. Marais, K. Rege 7 Feb 91 Popup - "Hypertext without Surprises" M. Franz, S. Ludwig 30 Sept 93 Stamp C. Szyperski 28 Sept 93 Style C. Szyperski 28 Sept 93 Table C. Szyperski 28 Sept 93 Version H. Mssenbck  This documentation is a periodically updated collection of sections describing fully independent text elements. Each section is divided into two subsections: A textual introduction to the functionality of the particular elements, followed by a list of supported commands. For each command, the command name, its explicit and its implicit parameters are given. Potential implicit parameters are the caret, selections, and the marked viewer. Explicit parameters are described using a compact syntax explained in the tutorial Edit.Guide.Text. At the end of each section a list of required files is given. E-mail update requests to the editor. Implementations of useful new text elements are always welcome. Companion documentation: Edit.Guide.Text - Tutorial and Release Notes Clock Elements Analog clocks elements displaying the current time (whenever the machine is idle). command explicit parameters implicit parameters ClockElems.Insert 9 [number] caret Insert a clock (with radius given in mm; default is 8) at the caret position. Dialog Elements (You have to install Dialogs.lha to use this with O4A) Dialog elemts support incorporation of panels compatible with the Dialogs package into texts. The command DialogElems.Insert inserts a new dialog element into a text at the text caret position. Using the middle mouse button, a dialog element can be "opened" for editing in a dialog viewer. The command DialogElems.Update in the viewers menu can be used to make the modifications in the dialog permanent. Dialog elements can be used like ordinary dialogs: focus the element using the left mouse key and do everything what you would do with an ordinary dialog. command explicit parameters implicit parameters DialogElems.Insert ("^" | "*" | name) caret (plus marked viewer, if "*" is used) Inserts a dialog element sized to show the dialog stored in file "name". If a dialog viewer is marked, the command inserts the dialog of this viewer. Directory Elements Directory elements allow a user to conveniently switch between working directories. These elements are derived from popup elements and always show the current working directory. Note: these elements are currently only available on the Power Macintosh. User interaction. A middle click at a directory element pops up a list of path names, e.g., HD:Oberon:MyFolder (an absolute path name) or $Source (a relative path name starting in the directory that contains the Oberon application). By selecting one of the menu items the current working directory is switched to that path and is displayed in the directory element. The list of path names can be edited after a middle-right click at the element (in the same way as in popup elements). command explicit parameters implicit parameters DirElems.Insert caret inserts a directory element at the caret position. Error Elements (O4A uses Error Elems from XE) Fold Elements Fold elements can be used to hierarchically fold text pieces. Folding a text piece causes its replacement by another, usually shorter or empty text piece. Unfolding a folded text piece reveils the original text piece while hiding its replacement. A (partially) folded text may be compiled as if it where fully unfolded using a utility module Folds. Folds also includes the functionality of ErrorElems, as defined elsewhere in this documentation.documentation. Options such as the compiler or error message file to be used can be specified in a file Folds.Profile. command explicit parameters implicit parameters FoldElems.Insert selection Makes the selection foldable by inserting a pair of fold elements around it. The fold elements are in expanded state. FoldElems.InsertCollapsed selection Makes the selection foldable by inserting a pair of fold elements around it. The fold elements are in collapsed state. FoldElems.Expand marked viewer or command viewer Unfolds (expands) all folds in the specified viewer. FoldElems.Collapse marked viewer or command viewer Folds (collapses) all folds in the specified viewer. FoldElems.Marks ("^" | "on" | "off") marked viewer or command viewer Makes all fold elements in the specified viewer visible or invisible. FoldElems.Search selection, focus viewer Searches for the selected text pattern in the text of the focus viewer starting at the caret position. It searches also within folded parts and opens folds if necessary to display occurrences of the pattern. If no selection exists, the last search pattern is used again. If no caret is set, the search starts at the beginning of the text. FoldElems.Restore marked viewer or command viewer Restores all folds that were expanded during a FoldElems.Search command to their previous state. Folds.Compile ("*" [compiler-options]) marked viewer or command viewer Compiles the marked text containing folds. The compiler is started on the fully expanded view of the text. Folds.ShowError [caret] Shows the next error after the caret position. If no caret is set, the first error in the text is displayed. Folds.SetProfile Sets the options specified in the file Folds.Profile (which compiler and which error message file should be used; should warnings be displayed). SetProfile is done automatically at the beginning. If Folds.Profile is missing, default options are: Compiler.Compile, OberonErrors.Text, warnings displayed. Procedures ExpandAll(t, from, temp) expands all fold elements in text t if they are after the text position from. If temp is TRUE, the folds are only expanded temporarily and can be collapsed again with FoldElems.Restore. CollapseAll(t, modes) collapses all fold elements in text t if they are of a kind that is contained in the set modes. FindElem(t, pos, proc, e) searches text t starting at position pos. For every encountered text element procedure proc is invoked. If this procedure returns TRUE, the element is returned by FindElem as e. Switch(e) switches the fold element e from collapsed to expanded or vice versa. Twin(e) If (e, x) is a pair of fold elements, Twin(e) returns x. Graphics Elements Graphic elements support incorporation of graphs compatible with the standard Draw package into texts. A single command is provided by module GraphicElems in order to insert a new graphics. Using the middle mouse button, a graphics element can be "opened" for editing. As a result, a graphics viewer is opened displaying the graph. The command GraphicElems.Update in the viewer's menu can be used to propagate changes made to the graph back to the graphics element. Graphic elements support inplace editing: focus the element using the left mouse key and use standard Draw editing techniques within the activated graphics frame. command explicit parameters implicit parameters GraphicElems.Insert ("^" | "*" | name) caret (plus marked viewer, if "*" is used) Inserts a graphics element sized to show the graph stored in graphics file "name". If an open graphics viewer is marked, the command can be used to insert all or part of a displayed graph: if a selection exists in the marked graphics viewer's graph, only the selection is copied into the graphics element. Icon Elements Display a small "walking sysiphus" icon. By clicking on such an icon using MM, a screen saver is started. Using an icon editor, the file IconElems.Icon may be changed or replaced to install a different animated icon. command explicit parameters implicit parameters IconElems.Insert caret Inserts a new Icon Element at the caret position. Info Elements Info elements are similar to popup menus. When clicking on the element with the middle mouse button, it responds by showing a text. This text contains additional information about the text in which the element is inserted. A typical application is a source module where you would like to add some informations about the programmer and the programming task to the document. command explicit parameters implicit parameters InfoElems.Insert caret Inserts a new Info Element at the caret position. Hints The module Find exports a command called AllInfo which can be very useful in combination with InfoElems: Find.AllInfo ^  searches within the InfoElems of the files specified with Find.Domain. The selection must be of the form item = searchPattern where item is one of {"Title", "Author", "Abstract", "Keywords", "Version", "From", "Until", "Hints", "Changes"}, searchPattern must match exactly or contain asterisks. E.g.: Find.AllInfo Author = *CS* Contents of a new InfoElem: "Title": no title "Author": no name "Abstract": no abstract "Keywords:": no keywords "Version": no version "From": 28.10.94 16:59:45 "Until": no date (use StampElems.Insert) "Hints": This text can again contain arbitrary text elements! Line Elements Line elements support horicontal or vertical lines within a text. A single command is provided to insert new line elements. The insertion command takes certain parameters such that line elements can be set to automatically adapt in width and height. command explicit parameters implicit parameters LineElems.Insert ("^" | ( ("auto" | "tab" | W) ("auto" | H) ) ) caret Inserts a line of given or automatically adopted width and height into a text. Width and height may be set in units of 1/10 mm. Otherwise, the width may be set to extend to the end of the current line ("auto") or to the next tabulator position ("tab"). The height may be set to equal the paragraphs line height (determined by the parc's line attribute). Link Elements This module provides two kinds of text elements: link elements and link menus. - A link element represents a hypertext link to a mark element (MarkElems). When the user middle-clicks at the link element the text around the associated mark element is displayed. A middle click at the mark element leads one back to the link element. - A link menu is an extension of a popup element (PopupElems). It can be used in the menu bar of a viewer. When the user clicks at a link menu, a list of all mark elements in the viewer pops up. By selecting an entry the user can get to any of the mark elements quickly. The list of marks is collected automatically. For example, the user can invoke the command MarkElems.MarkProcs to insert mark elements in front of all procedure names in procedure declarations. The link menu will then show all these mark elements and the procedure names following them in the text. Of course the user can also insert mark elements explicitly (e.g., in front of type names or variable names). These marks will also be shown in the link menu together with the names following them in the text. User interaction. A middle click at a link element displays the text around the associated mark element. If the mark element is in the same text as the link element, the text is scrolled to the mark element's position. If it is in a different text, a new viewer is opened showing the mark element and its surrounding text. A middle-right click at a link element opens a viewer showing the value of the link target (expressed by the tuple ). This text can be edited and stored back to the element with LinkElems.Update from the viewer's menu. A middle click at a link menu pops up a list of all marks in the viewer's text. By selecting a specific entry the text is scrolled to that mark. command explicit parameters implicit parameters LinkElems.Insert caret inserts a link element at the caret position. The target point of the link is taken from the most recent selection. If a mark element is selected the link goes to that mark element otherwise a new mark element is inserted at the beginning of the selection. LinkElems.InsertMenu caret inserts a link menu at the caret position. Link menus should only be used in the menu bar of a viewer. LinkElems.Update updates an edited value. See also "middle-right click" above. Procedures New(f, k) creates and returns a link element that leads to the mark element with the key k in file f. FollowLink(f, k, lf, le) follows as link to a mark element with the key k in file f. The frame containing the link element must be given in lf and the link element itself in le. These two parameters are used to establish a backwards link. Hint It is a good idea to insert a link menu in Edit.Menu.Text, so that a list of all marks can be popped up in all text viewers. Mark Elements Mark elements mark a certain position in a text. They are typically used as the target of hypertext links (LinkElems) or as bookmarks. They can be referenced via a numeric key. User interaction. If one got to a mark element by following a hypertext link, a middle click at this element will lead one back to the source of the link, i.e., to the corresponding link element. A middle+right click will open a viewer showing the element's key. The key can be edited and stored back to the element with MarkElems.Update from the viewers menu. This may be useful in rare cases to resolve key ambiguities. command explicit parameters implicit parameters MarkElems.Insert caret inserts a mark element with a new key at the caret position. MarkElems.Update updates an edited key value. See also "middle click" above. MarkElems.ShowNext caret searches for the next mark element after the caret position and sets the caret to it. MarkElems.MarkProcs marked viewer inserts mark elements in front of all procedure declarations in the marked viewer. This is useful in the context of link menus (see LinkElems.Menu) which automatically create links to all mark elements in a text. Procedures New() returns a new and initialized mark element that has not been inserted into a text yet. Index Elements Index elements work similar to mark elements. They also mark a text position which may be used as the target of hypertext links (LinkElems) or as bookmarks. The added functionality is their ability to automatically create an index of the corresponding text. User interaction. A middle click will open a viewer showing the text associated with this element. The associated text can be edited and stored back to the element with IndexElems.Update resp. MarkElems.Update from the viewer menus. command explicit parameters implicit parameters IndexElems.Insert caret inserts an index element with a new key at the caret position. The current selection is taken as the associated text. If there is no current selection, the associated text is empty. IndexElems.Update updates the edited associated text. See also "middle click" above. IndexElems.Hide marked viewer hides all index elements in the marked viewer. IndexElems.Show marked viewer redisplays all index elements in the marked viewer. IndexElems.Index server-name "*" {option} Generates an Index for the marked viewer. As a side effect, text is printed as well. For a detailed description of available options read the information on Edit.Print. The index is displayed in a separate viewer. It has the following format: tab pagenumber {"," pagenumber }. Picture Elements Picture elements support incorporation of pictures compatible with the standard Paint package into texts. Using the middle mouse button, a picture element can be "opened" for editing. As a result, a picture viewer is opened displaying the picture. The command PictureElems.Update in the viewer's menu can be used to propagate changes made to the picture back to the picture element. command explicit parameters implicit parameters PictElems.Insert ("^" | "*" | name ["scaled"]) caret Inserts a picture element sized to show the picture stored in picture file "name". If "*" is used, the marked picture is inserted. Popup Elements - "Hypertext without Surprises" Popup elements respond to a middle mouse click by showing a text of lines (usually commands) that can be selected (executed) by moving the mouse up and down. The default behavior is to interpret the selected line as a command and execute it. Oberon.Par is initialized with the viewer and the frame containing the menu as well as with the menu text and the position of the command in this text. If the menu contains just a single line it does not pop up but this line is selected by default. If the user clicks at the menu without moving the mouse the most recently selected line is assumed to be still selected. If the selected line starts with another element (e.g., a link element) this element receives a middle-click message, i.e., it is executed. Editing a menu. A middle+right click at a popup element opens a viewer that displays the menu text. This text can be edited (commands can be added or removed) and stored back to the element by executing the command PopupElems.Update from the menu bar of the viewer. The menu name can be changed by editing the name of the edit viewer. command explicit parameters implicit parameters PopupElems.Insert (name | string | ^) inserts a popup menu at the caret position. The command argument specifies the menu name. PopupElems.InsertMenu (name | string | ^) inserts a small popup menu at the caret position. The height of a small menu is chosen such that the menu fits into the menu bar of a viewer. The command argument specifies the menu name. PopupElems.Toggle If executed from the menu bar of the menu edit viewer, the command toggles between a small and a large menu element. PopupElems.Update can be executed from the menu bar of the menu edit viewer. It stores the text in this viewer as the menu text of the edited popup menu. Procedures - MeasureMenu(m) computes the metrics of the popup window for the menu text. This procedure has to be called whenever the menu text has been modified. Hints for implementors of subclasses - Intercepting the menu selection: In subclasses of popup menus the menu selection can be intercepted by reacting to the execute message (ExecMsg) that is sent to the menu when one of its lines is selected. This message contains the position (origin) of the selected line in the menu text. - Popup menus with icons: A popup element usually displays a string (its name). If this string is empty an empty element box is drawn. A subclass of popup elements can then draw an icon into the menu box. Menu Elements Menu elements are a variant of popup elements. They appear as a simple piece of text (their name) on the screen. If clicked at with MM, a command menu pops up. A Middle-Left-Click at the element causes the menu text to be displayed for editing in a separate viewer. The first line of the menu text is interpreted as the menu name. command explicit parameters implicit parameters MenuElems.Insert caret position Inserts a menu element at the caret position. Initially the element is displayed as a blank rectangle. A Middle-Left-Click displays the (empty) menu text for editing. MenuElems.Update text in command viewer This command is usually contained in the menu of the viewer that displays the text of a menu element for editing. It installs the text in the viewer as the new menu text of the element. Stamp Elements Display date of most recent store of the text containing the element. (After insertion, StampElems display the current date.) The insert command takes an optional font name which is used to preset the font of the inserted element. command explicit parameters implicit parameters StampElems.Insert [name] caret Inserts a new stamp element, where the name indicated the font to be used. (If name is omitted, the default font is used.) Style Elements Style Elements extend standard Parcs by adding a name and automatic conformance of equally named parcs within a text. For example, a parc named "heading" may be set to format a section heading. Then, all parcs with that name use and maintain the same format as changes are propagated automatically. When copying a style parc from one text to another the behaviour of the copied parc depends on the target text. If it already contains a style with that name, the copied parc will adopt itself to that style. Otherwise, the copied parc defines a new style. Likewise, a style parc may be renamed. If it is renamed to a style that already exists in the containing text, the parc will adopt to that style, while otherwise it introduces a new style. Some examples for style parcs follow below. Note that the Syntax8.Scn.Fnt file should be available to get nicely labled style parcs. command explicit parameters implicit parameters StyleElems.Insert ("^" | name | string) caret Insert a new style parc with the given name at the caret position. A quoted string may be used to assign names consisting of multiple words. StyleElems.Rename ("^" | name | string) selected parc Renames the selected parc to the given name. Table Elements Table Elements are automatically formatted tables created from raw, unformatted data. A plain text separated by tabulator characters into columns and by carriage returns into rows can be used to define the table. Furthermore, a certain set of options may be used to modify the default formatting of the table. Clicking on a table element using MM opens an viewer such that the table contents can be edited. Tables may contain arbitrary text elements, including tables. However, elements incorporated into a table are frozen as is, i.e. messages broadcasted to all visible elements in a text frame are not passed to elements nested into a table. Hence, only static elements should be inserted into tables. Starting from a defining text containing arbitrary strings separated by tabulator and carriage-return characters, a table is constructed. Tabulators separate columns, carriage-returns separate rows. The separated strings form the contents of table cells. Each such string may in turn contain arbitrary text elements and especially it may contain nested tables. The defining text is bound to a table element and can be edited by clicking on a table with the middle mouse button. In return, a standard text viewer is opened containing an update command in its menu bar. The syntax of the defining text is as follows, table options will be defined later. table = {option} "/table" {line}. line = cell {TAB cell} CR. cell = ["#" | "&"] . A string starting with a digit, a period (.), or a sign (+ or -) is considered numeric, otherwise it is considered nonnumeric. A number sign (#) prefixing a string is suppressed and enforces numerical interpretation; likewise, an ampersand (&) prefixing a string is suppressed and enforces nonnumerical interpretation. The default table formatting causes all cells in the first column to be formatted left flush. In all other columns, the default format for numeric cells is period-aligned and that for nonnumeric cells is centered. All cells in a row are by default aligned to a common base line. Also, the default format causes the table to be framed and separating lines between rows and columns to be drawn. Finally, for a table with more than two rows or two columns the first row or column separatation line is drawn using two parallel lines, respectively. Most of the default formats can be changed using the provided option set. For table elements the printing dilemma discussed in section 1.5 needs to be reconsidered. Following the strategy developed for texts, a table would be recasted when printing. However, one of the primary attributes of a table are its measures, i.e. the space taken for individual cells of the table and the arrangement of the cells with respect to each other. It is not acceptable that a table gets completely redimensioned when printed. Hence, for table elements a different printing strategy has been choosen: the displayed table on the screen follows - down to the character level - the metrics of the printer fonts. The resulting screen image looks a bit distorted, however, the displayed measures correspond as closely as possible to the printed ones. The following table gives an overview over available table formatting options.  option effect (measures in 1/10 mm) argument values                    *) A parc at the beginning of the table defining text introduces a minimal cell height as well as a cell height grid (if the grid option of the parc is set) Overview of TableElems Options command explicit parameters implicit parameters TableElems.Insert ["^" | name] caret Insert a table defined by the given text at the caret position. If no defining file is given, or the table definition is syntactically erroneous, an empty table is inserted. TableElems.Update (to be called from menu frame) Take the viewer's content frame's text as defining text and update the associated table element.