From: Mike Manning,1:253/50@fidonet
To: James McOrmond
Receive-Date: Sunday, 18-Dec-94 14:36:13
Message-ID: 2560191f@p0.f50.n253.z1.fidonet.org
Date: 17 Dec 94  09:28:47
Subject: Re: JAMMY AND AMIGAFAX
Attributes: private 
X-Newsreader: Foozle 1.02
UserFlags: WriteAccess ReadAccess
GlobalFlags: Exported

 * Forwarded from area "NETMAIL" (NETMAIL)
 * Originally from: Sean Aldrich (1:2606/216)
 *              to: Mike Manning
 *            date: 29 Nov 94  23:35:47

In Email on 29 Nov 94  17:35:49, Mike Manning wrote:
MM>Greetings, Sean!

Greetings and salutations. :)

MM>I was just perusing the JamMail files in the newest version package, and
MM>noticed you had successfully gotten AmigaFax to work with JamMail.

Yup... I just noticed that file in the distribution a couple of days ago.

MM>I use JamMail, and AmigaFax as well, but to date, only separately  :( James
MM>included a conversation you had with him on this subject, and I have
MM>already tried your settings without success. What modem initialization
MM>string do you use in JamMail. I'm not sure 'atz' will cut it without
MM>appropriate fax strings as well. What modem response have you set for FAX?
MM>I've tried '+FCON' as well as just 'fax'

Here is my modem setup in Jammail:

-------------
JamMail.Wpl Creator by James McOrmond
                         Configure Line #1's Modem


   1. Modem Name:       "GVC_14.4_FaxModem"
   2. Hangup String:    "v~^"
   3. Attention String: "at|"
   4. Init String:      "at+fdcc=1,3,0,2+fclass=0|~at+fcr=1+faa=1|"
   5. Slow Modem:       "TRUE"
   6. Answer String:    "ATA|"
   7. Default Dial:     "atdt"

GVC_14.4_FaxModem (line 1) Response Strings

      1. BUSY "BUSY"                    2. LINE "NO DIALTONE"
      3. FIND "CONNECT "                4. FAX  "+FCON"
      5. 300  "CONNECT"                 6. RING "RING"
      7. MAID "NO CARRIER"

-------------

As you can see, the init string as to setup the fax stuff.  ATZ resets them
to defaults that don't work.  Jammail doesn't show you the second AT
command in the modem window, but it will go through.  I have it set to
slow-modem because it doesn't wait for the OK from the modem before sending
the second string.  (Something I should tell Jammy about.)

GVC modems are class 2 command-set compatible, so you need to use +FCON for
the connect string.

If you still don't get it working, let me know and I'll help you with it.


--
 Sean Aldrich                              Voice: 201-770-2826       Only AMIGA
 Delta Computers, Hopatcong, NJ         Fax/Data: 201-398-8559    // makes it  
 email: sean@dltacom.camphq.fidonet.org  FidoNet: 1:2606/216.0  \X/  possible!



Comments:
UMS-FIDO/FidoImport
^APID: Foozle 1.02
^AReAddresed from FidoNet#1:163/139.0 to FidoNet#1:163/139.2
^AVia Gordon 1.25j 1:163/139.0, 94-12-18 14:24:43