; This is the install Script for TransAmiga BBS v1.21 ; Init various variables (set @execute-dir (pathonly @icon)) ; get the path to directory for which ; script is started (set #vernum (getversion)) (set #ver (/ #vernum 65536)) (set #rev (- #vernum (* #ver 65536) ) ) (set #bbsassign "BBS") (set #CPU (database "cpu")) (set #bbspath (getassign #bbsassign "a")) ; get the physical path of BBS: ; check if we can find a previous TA version (complete 0) (if (= (exists "sys:Utilities/MultiView") 1) ( ; start of positive part (run "SYS:Utilities/MultiView" "ReadMe.1st" (prompt "Important information file.") (help "Read this file carefully!")) ) ; end of positive part ( ; Start negative part (if (= (exists "sys:Utilities/AmigaGuide") 1) ( ; start positive part (run "SYS:Utilities/AmigaGuide" "ReadMe.1st" (prompt "Important information file.") (help "Read this file carefully!")) ) ; end of positive part ) ; end of if ) ; end of negative part ) ; end of if (if (= #bbspath "") ; check if BBS: exists ( ; start of positive part (does not exist) (set #update (askbool (prompt "TransAmiga BBS seems not to be installed." " If you allready have TransAmiga installed" " then select \"Update\"") (help "If you do not have TransAmiga installed" " select \"Install\" otherwise select \"Update\"") (default 1) (choices "Update" "Install"))) ) ; end of positive part ( ; start of negative part (set #update (askbool (prompt "TransAmiga BBS seems to be installed " "allready.\n\n" "Do you wish to update your installation?") (help "If you do not have TransAmiga BBS installed " "allready you should select \"Install\".") (default 1) (choices "Update" "Install") ) ; end of askbool ) ; end of set #update (set @default-dest #bbspath) ) ; end of negative part ) ; end of check (complete 3) (if #update ( ; Start of positive part - update installation ; find TransAmiga's main directory (if (askbool (prompt "Is TransAmiga BBS installed in \"" #bbspath "\" ?") (help "\"" #bbspath "\" should be the directory" " where you keep all subdirectories of" " TransAmiga BBS. If you keep them elsewhere" " select \"No\".") (default 1) ) ; end of askbool ( ; start of positive part (set #dummy "1") ; empty parts are not allowed ) ; end of positive part ( ; start of negative part (set #bbspath (askdir (prompt "Please select directory where you keep" " TransAmiga's directories.") (help "In a standard TransAmiga installation it is" " BBS:\n") (default #bbspath) ) ) )) ; end of negative part (complete 5) ; start update (set @default-dest #bbspath) (if (askbool (prompt "We are ready to update your " "installation. Do you want your old executables backed " "up in the directory \"" (tackon #bbspath "old_bin") "\" ?") (help "This release has been tested in many ways. It is " "not necessary to back up your old files, however I " "recommand it. You can delete the old files later.\n\n" "Bugs may be left - no software is bugfree." " If you find any bugs send a mail to a support " "board! This is important to improve the project." "\n\nIf you want to have a copy of your files" " then select \"Backup files\" and your files will be" " stored in \"" (tackon #bbspath "old_bin") "\"." " You can copy them back to your \"" (tackon #bbspath "bin") "\" if needed.") (default 0) (choices "Backup files" "Don't backup") ) ; end of askbool ((complete 5) ; find the executables (if (= (exists (tackon #bbspath "bin")) 2) ; start of positive part of askbool (set #bindir (tackon #bbspath "bin")) ; positive part (set #bindir (askdir (prompt "Where are your executables?") (help "Choose the directory where the binary files" " are located you wish to update. As BBS:bin" " does not exist you have to specify the" " directory. It is not checked if there" " allready exist the binaries so you can" " make an other directory. We suggest to" " keep the binary files in \"BBS:bin\" so" " further updates can be installed easily.") (default #bbspath) ) ; end of askdir ) ; end of negative part ) ; end of if exists (complete 10) ; backup old binaries ; (makedir (tackon #bbspath "old_bin")) (copyfiles (prompt "Select files to backup") (help @copyfiles-help) (source #bindir) (dest (tackon #bbspath "old_bin")) (all) (confirm) ) ; end of copyfiles ) ; end of positive part ) ; end of *if* askbool - backup is done if the user wished (complete 15) ; Install the new executables (message "The next step will copy the new executables.") (if (exists (tackon #bbspath "bin")) (set #target (tackon #bbspath "bin")) ; positive part (set #target (askdir (prompt "Please select directory for new binaries") (help "Choose the directory where the binary files" " are located you wish to update. As BBS:bin" " does not exist you have to specify the" " directory. It is not checked if there" " allready exist the binaries so you can" " make an other directory. We suggest to" " keep the binary files in \"BBS:bin\" so" " further updates can be installed easily.") (default #bbspath) ) ; end of askdir ) ; end of directory choice and negative part ) (copyfiles (prompt "Copying binary files...") (help "This section installes the new executables that" " belong to TransAmiga v1.21.") (source (tackon (pathonly @icon) "bin")) (dest #target) (all) (confirm) ) ; end of copyfiles (complete 20) ; install 68030 versions if system has support for them (if (> #CPU "68010") (if (askbool (prompt "Your Amiga is equiped with MC" #CPU "." " Some parts of TransAmiga BBS" " are compiled for MC68020. Do you" " wish to install these versions?" "\n\nAttention! Don't use these files" " if you have an EC processor (e.g. 68EC030)") (help "I suggest to use these optimized versions" " as they are a bit faster.\n") (default 1) (choices "Install" "Skip this part") ) (copyfiles (prompt "Copying 68020 binary files...") (help @copyfiles-help) (source (tackon (pathonly @icon) "bin_020")) (dest #target) (all) (confirm) ) ; end of positive part ) ) ; end of if (complete 25) ; delete old hisoftbasic.library (if (= (exists "libs:hisoftbasic.library") 1) (delete (prompt "TransAmiga v1.21 comes with the new" " hbasic2.library and does not use" " hisoftbasic.library any more. Shall the old" " library be deleted?") (help "hisoftbasic.library really should be deleted as" " it only wastes storage.\n\nAll programs that used" " this library have been replaced by versions" " that no longer use it.\n\nHowever, if you wish to" " be able to run your previous TransAmiga" " version keep it. You can delete it manually" " if you find out that you no longer wish to" " return to earlier TransAmiga versions.") (confirm) (optional force askuser) ) ; end of delete ) ; end of if (complete 30) ; install transamiga, hbasic2, zmodem and garbagecollector.library (copylib (prompt "TransAmiga v1.21 needs the new" " hbasic2.library or it will not run. It is" " installed now.") (help "TransAmiga v1.21 will not work without" " hbasic2.library.\n\nIt has to be installed or this" " install script will fail at a later part!") (source (tackon (pathonly @icon) "Libs/hbasic2.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copylib (complete 40) (copylib (prompt "TransAmiga v1.21 needs the new" " transamiga.library. It is" " installed now.") (help "TransAmiga v1.21 will not work correctly without" " the new transamiga.library. If you use an older" " version you may come accross strange problems and" " you are not able to use the new ARexx commands." "\n\nATTENTION! Don't use this library with older" " versions of TransAmiga as you will have no local" " display in this case. Other strange things may" " happen I am not aware of currently.") (source (tackon (pathonly @icon) "Libs/transamiga.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copylib (complete 45) (copylib (prompt "garbagecollector.library is needed by some new" " tools that are supplied with this version." " Should it be installed now?") (help "I strongly suggest to install the library or you" " will not be able to use the programs supplied in" " bin_020 directory or the correspondig versions in" " bin directory. Those tools are written in Oberon-II" " and the library manages efficient memory handling." " You really really should install it.") (source (tackon (pathonly @icon) "Libs/garbagecollector.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copylib (complete 50) ; check which arp.library can be installed (if (< #ver 36) (set #arpname "arp.library.OS1_3") (set #arpname "arp.library.OS2_x") ) ; check which zmodem can run on the machine (if (> #CPU "68010") (set #libname "xprzmodem.library.020") (set #libname "xprzmodem.library") ) ; install arp.library (copylib (prompt "TransAmiga and library need arp.library to work." " There are two versions of the library. If you" " have AmigaOS 2.x or up the arp.library maps" " it's functions to system routines. I detect" " AmigaOS v" #ver "." #rev " and will install the" " correct version. Shall I install it?") (help "arp.library is also an essential library as it" " provides routines that make a programmer's life" " easier when he is forced to compatibility with" " AmigaOS 1.3 (34.x).") (source (tackon (tackon (pathonly @icon) "Libs") #arpname)) (dest "Libs:") (newname "arp.library") (confirm) (optional force askuser) ) ; end of copylib (complete 55) ; install xprzmodem.library v2.52T (copyfiles (prompt "There are several new xprzmodem.library versions" " floating around, but most of them have bugs or" " they are extreamely slow and CPU time hungry.") (help "This xprzmodem.library v2.52t provides a special parameter" " called T like TransAmiga. If the library is in" " this mode it accepts upload resumes only if there" " is no .Desc file.\n\n.Desc files are made by TransAmiga" " as soon as the file is received completely and" " written to the filelist. So it's save to say:" "\n\nIf there is a .Desc file no resume is allowed." "\n\nThis is the whole secret of the library." " The library is compiled by Georg 'Gio' Magschok." "\n\nSeveral SysOps reported problems with v3.x" " of xprzmodem.library. The library is localized" " and needs a lot of CPU time. This can lead to" " transmission errors especially with higher" " speeds. If you have a really fast CPU you may" " never come accross this phenomen, but if you" " do not use a serial board (e.g. MFC) I strongly" " suggest to use the supplied version as it works" " perfectly.") (source (tackon (tackon (pathonly @icon) "Libs") #libname)) (dest "Libs:") (newname "xprzmodem.library") (confirm) (optional force askuser) ) ; end of copyfiles (copylib (prompt "A new fifo.library is installed.") (help "The fifo part is PD by Matt Dillon.\n\nYou really" " should install it as TrShell will not run without" " fifo.") (source (tackon (pathonly @icon) "Libs/fifo.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copyfiles (copylib (prompt "A new fifo-handler is installed.") (help "The fifo part is PD by Matt Dillon.\n\nYou really" " should install it as TrShell will not run without" " fifo.") (source (tackon (pathonly @icon) "L/fifo-handler")) (dest "L:") (confirm) (optional force askuser) ) ; end of copyfiles (startup "Fifo" (prompt "Adding fifo start entry to user-startup") (help "This has to be done to use fifo.") (command "run nil: l:fifo-handler\n") ) (complete 65) ; Install the docs (set #frompath (tackon (pathonly @icon) "docs")) (copyfiles (prompt "Installing new Docs...") (help "You really should copy them as they are really" " important.\n\nI strongly suggest to read the" " docs carefully if you want to avoid" " problems caused by missing information.") (source #frompath) (dest (tackon #bbspath "docs")) (all) (confirm) (optional force askuser) ) ; end of copyfiles (complete 70) ; Install Rexx stuff (if (askbool (prompt "Attention! Your logon.trans can be overwritten" " while updating!\n" "Backup your ARexx scripts in \"" (tackon #bbspath "old_rexx") "\" ?") (help "You really should back up your ARexx scripts or you" " may loose your logon.trans, for example." "\n\nIf you want to have a copy of your files" " then select \"Backup files\" and your files will be" " stored in \"" (tackon #bbspath "old_rexx") "\"." " You can copy them back to your \"" (tackon #bbspath "rexx") "\" if needed.") (default 0) (choices "Backup files" "Don't backup") ) ; end of askbool ( ; start of positive part (copyfiles (prompt "Select files to backup") (help @copyfiles-help) (source (tackon #bbspath "rexx")) (dest (tackon #bbspath "old_rexx")) (all) (confirm) ) ; end of copyfiles )) ; end of if (message "The next step will copy some ARexx scripts.") (copyfiles (prompt "Some ARexx scripts are updated or new...") (help "If you allready installed TransAmiga and" " have used it for a while you surely have" " made your own scripts.\n\n" "No matter of that you should have a look" " at the supplied files. It is not really" " necessary to install them, but they are" " of some interest.\n\nFollowing scripts are" " supplied:\n\nDeepSpace.trans\nKnight.trans\n" "Localdisplay.trans\nLogon.trans\nNode.trans\n" "Relogin.trans\nTrMaint.trans\nTrShell.trans\n\n" "Be carefull with Logon.trans if you use your" " own or a custom one you should not copy it." " Have a look at it and see if you can use parts.") (source (tackon (pathonly @icon) "rexx")) (dest (tackon #bbspath "rexx")) (confirm) (all) (optional force askuser) ) ; end of copyfiles (complete 80) ; update configs - the ugly part. ; find the path to the config files (set #cfgpath (askdir (prompt "Select your configs directory:") (help "If you use an other directory than \"" (tackon #bbspath "Configs") "\" you have to change the path.\n\n" "Standard installation uses the path" " specified above.") (default (tackon #bbspath "Configs")) ) ; end of askdir ) ; end of set (complete 81) ; backup existing configs (copyfiles (prompt "This part makes a backup of all your configs...") (help "You really should make a backup as we never know" " if the update script fails or C= Installer" " gurus...") (source #cfgpath) (dest (tackon #bbspath "old_Configs")) (confirm) (all) (optional force askuser) ) (complete 85) ; which language is in Default.lang? (if (askbool (prompt "Which language do you use for your" " Default.lang file?") (help "If you do not use English or German you" " should select the language you understand" " and edit your language file when the script" " finished. Change the lines you find in the" " other language to that one you use.\n\n" "Read the help of the next page - it is" " important!") (default 1) (choices "English" "German") ) ; end of askbool (set #lang "ENGLISH") (set #lang "DEUTSCH") ) (complete 88) (copyfiles (prompt "Install new cfg file...") (help "You only need it if you upgrade from" " TransAmiga v1.11. If you have v1.12g1" " running you don't need them. You should" " manually check if you need some of the" " .lang files.") (source (tackon (pathonly @icon) "Configs/Language.cfg")) (dest #cfgpath) (confirm) (optional force askuser) ) ; end of copyfiles (complete 89) (copyfiles (prompt "Install new menu file...") (help "You only need it if you upgrade from" " TransAmiga v1.11. If you have v1.12g1" " running you don't need them. You should" " manually check if you need some of the" " .lang files.") (source (tackon (pathonly @icon) "Configs/custom.menu")) (dest #cfgpath) (confirm) (optional force askuser) ) ; end of copyfiles (complete 90) ; update configs through external program (run (cat "\"" (tackon (pathonly @icon) "cfgupd") "\" \"" #cfgpath "\" " #lang) (prompt "An external command is now started to update" " your existing config files.\n\nUserfiles are" " updated when the user loggs on.") (help "To run TransAmiga you really should update your" " configs or TransAmiga will come up with some" " error on startup.\n\nSomething important:\n" "Several new features require some more lines in" " the main configuration file (e.g. transamiga.cfg)" " that can't be made by the script in an easy way." " If you do not want to use the defaults you should" " run TransCfg and change the values to your needs." "\n\nIf you currently use v1.11 your File.Cmds and" " your Settimgs.Cmds will get new lines. Edit these" " files with your favoutite text editor and change" " the keys to suit your setup.") (confirm) ) (complete 100) ) ; end of positive part ( ; start of negative part - Install TA (message "You have decided to have a look at TransAmiga BBS." " Congratulations you have defeated Darth Vader - oops," " wrong game. Ok, allow me some words about TransAmiga" " BBS. The development of TransAmiga BBS started in 1990" " in California. Timothy J. Aston played around with" " BASIC and the serial port. This playing resulted" " in a first little BBS project. Time passes and the play" " gets serious. The first version of TransAmiga BBS is" " released to public. Since then many improvements and" " ideas have been realized.") (message "TransAmiga BBS is still under" " constant development. TransAmiga BBS is designed to" " give the user an attractive interface. The SysOp part" " was not so important as some familarity with the Amiga" " Operating System is really needed. You had to read the" " manual carefully to install TransAmiga and keep it" " running.") (message "This script wipes out the need of reading" " the manual to install TransAmiga BBS. That's dangerous" " as you really _*should*_ read the manual. If you don't" " read the manual you surely will not be able to design" " a well-looking and successfull BBS. This script is a" " part of the development of a powerfull SysOp interface" " for TransAmiga BBS.") (message "The power of" " TransAmiga BBS is the ARexx interface. You can do" " almost everything with ARexx. TransAmiga provides more" " than 150 ARexx commands and gets more from release to" " release. This script does not install ARexx as it is a" " part of Workbench 2.0 and up. If you use WB 1.3 you" " should buy ARexx or better update your system to" " AmigaOS 2.0 or higher. The next release of TransAmiga" " BBS _MAY_ NO LONGER WORK WITH WB 1.3 as AmigaOS 2.0" " offers a lot of powerfull features for programmers.") (message "STOP! Enough! - ok, It may be boring to read all" " this stuff so I now start the real installation of the" " BBS. You will be asked where to locate files and" " everything that's needed to make the configuration" " files.\n\n***ATTENTION!***\nIf you install in the same" " directory as your current installation most of your" " config files are lost!") (complete 31) (set #bbspath (askdir (prompt "Where do you wish to install TransAmiga" " BBS?") (help "TransAmiga BBS will be installed in the" " selected directory. Several subdirectories" " will be created [without ask] and the" " needed files are copied to them. The" " assignment \"BBS:\" will lead to this" " directory.\n\nTransAmiga itself needs about" " 1 MByte for the files. On your boot device" " is also space needed for the font," " handlers and libraries. You should at" " least have 5 MB free on the drive where" " you want to install TransAmiga BBS." "\n\nThis space is needed when you customize" " the BBS and install door games. You" " can locate your file areas on an other" " drive or keep them on the same." "\n\nWARNING: Experience showed that you" " should at least have a 80 MB hard drive" " if you wish to have an interesting choice" " of programs online.\n\nThe assignment" " will be written to your user-startup" " later. See that section if you want to" " know more about the assignment.\n\n" "You can create a new directory with the" " \"Create New Drawer...\" option. If you" " found the directory where you wish to" " instal TransAmiga BBS then select" " \"Proceed\".") (default "Work:bbs") (disk) ) ; end of directory choice ) ; end of set #bbspath (set @default-dest #bbspath) (makeassign "BBS:" #bbspath) ; copy binaries (copyfiles (prompt "Copying executables...") (help "This are the executable files that are needed to" " run TransAmiga BBS. Copy all of them until you" " know which you don't need.") (source (tackon (pathonly @icon) "bin")) (dest (tackon #bbspath "bin")) (all) (confirm) (optional force) ) (complete 5) ; install 68020 versions if system has support for them (if (> #CPU "68010") (if (askbool (prompt "Your Amiga is equiped with MC" #CPU "." " Some parts of TransAmiga BBS" " are compiled for MC68020. Do you" " wish to install these versions?") (help "I suggest to use these optimized versions" " as they are a bit faster.\n") (default 1) (choices "Install" "Skip this part") ) (copyfiles (prompt "Copying 68020 binary files...") (help @copyfiles-help) (source (tackon (pathonly @icon) "bin_020")) (dest (tackon #bbspath "bin")) (all) (confirm) ) ; end of positive part ) ) ; end of if (complete 7) ; copy the doc files (copyfiles (prompt "Copying documentation files...") (help "This are the documentation files you really should" " read if you want to use the power of TransAmiga BBS.\n\n" "TransAmiga.dvi is only needed if you use a TeX read/print util.") (source (tackon (pathonly @icon) "Docs")) (dest (tackon #bbspath "Docs")) (all) (confirm) (optional force) ) (complete 10) ; copy programmers docs (copyfiles (prompt "Copying documentation files for programmers...") (help "This are the documentation files you need" " if you want to make programs for TransAmiga BBS.") (source (tackon (pathonly @icon) "Programming")) (dest (tackon #bbspath "Programming")) (all) (confirm) (optional force) ) (complete 12) ; copy the .trans files (copyfiles (prompt "Copying TransAmiga BBS ARexx macros...") (help "These files have the real power! You can use" " ARexx macros to do almost everything a BBS should" " do and more :-]. This type of files is really important" " if you want to customize the BBS.") (source (tackon (pathonly @icon) "Rexx")) (dest (tackon #bbspath "Rexx")) (all) (confirm) (optional force) ) (complete 15) ; copy example text files (copyfiles (prompt "Copying text files...") (help "These files are very important. You can" " customize the look of your BBS by editing them." " .ANSI files are for callers with ANSI terminal and" " files without extension are for normal display." " You should use an ANSI-Editor to customize the" " .ANSI files. There are some available for Amiga" " and a lot more for MS-DOS.") (source (tackon (pathonly @icon) "Text")) (dest (tackon #bbspath "Text")) (all) (confirm) (optional force) ) (complete 20) ; copy bulletins (copyfiles (prompt "Copying bulletin files...") (help "These files are needed to start the BBS" " immediately. If you know how to handle" " bulletins you can skip this.") (source (tackon (pathonly @icon) "Bulletins")) (dest (tackon #bbspath "Bulletins")) (all) (confirm) (optional force) ) (complete 21) ; copy system directory (copyfiles (prompt "Copying system files...") (help "These files are needed to start the BBS" " immediately. If you run TransCfg anyway" " to set up your BBS you can skip this.") (source (tackon (pathonly @icon) "System")) (dest (tackon #bbspath "System")) (all) (confirm) (optional force) ) (complete 23) ; install TransAmiga's defaupt font (copyfiles (prompt "Copying BBS font...") (help "The font is needed to display IBM ANSI graphics." " As IBM ANSI graphics are standard in BBS" " telecommunication it is essential to have" " the same outfit locally that is remote.") (source (tackon (pathonly @icon) "fonts")) (dest "fonts:") (all) (confirm) (optional force) ) (complete 25) ; install the libraries ; install hbasic2.library (copylib (prompt "TransAmiga v1.21 needs the new" " hbasic2.library or it will not run. It is" " installed now.") (help "TransAmiga v1.21 will not work without" " hbasic2.library.\n\nIt has to be installed or this" " install script will fail at a later part!") (source (tackon (pathonly @icon) "Libs/hbasic2.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copylib (complete 27) ; install transamiga.library (copylib (prompt "TransAmiga v1.21 needs the new" " transamiga.library. It is" " installed now.") (help "TransAmiga v1.21 will not work correctly without" " the new transamiga.library. If you use an older" " version you may come accross strange problems and" " you are not able to use the new ARexx commands." "\n\nATTENTION! Don't use this library with older" " versions of TransAmiga as you will have no local" " display in this case. Other strange things may" " happen I actually don't think of.") (source (tackon (pathonly @icon) "Libs/transamiga.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copylib (complete 30) ; install Oberon's garbagecollector.library (copylib (prompt "garbagecollector.library is needed by some new" " tools that are supplied with this version." " Should it be installed now?") (help "I strongly suggest to install the library or you" " will not be able to use the programs supplied in" " bin030_881 directory or the correspondig versions in" " bin directory. Those tools are written in Oberon-II" " and the library manages efficient memory handling." " You really really should install it.") (source (tackon (pathonly @icon) "Libs/garbagecollector.library")) (dest "Libs:") (confirm) (optional force askuser) ) ; end of copylib (complete 33) ; check which arp.library can be installed (if (< #ver 36) (set #arpname "arp.library.OS1_3") (set #arpname "arp.library.OS2_x") ) (complete 35) ; check which zmodem can run on the machine (if (> #CPU "68010") (set #libname "xprzmodem.library.020") (set #libname "xprzmodem.library") ) (complete 40) ; install arp.library (copylib (prompt "TransAmiga and library need arp.library to work." " There are two versions of the library. If you" " have AmigaOS 2.x or up the arp.library maps" " it's functions to system routines. I detect" " AmigaOS v" #ver "." #rev " and will install the" " correct version. Shall I install it?") (help "arp.library is also an essential library as it" " provides routines that make a programmer's life" " easier when he is forced to compatibility with" " AmigaOS 1.3 (34.x).") (source (tackon (tackon (pathonly @icon) "Libs") #arpname)) (dest "Libs:") (newname "arp.library") (confirm) (optional force askuser) ) ; end of copylib (complete 45) ; install xprzmodem.library v2.52T (copyfiles (prompt "There are several new xprzmodem.library versions" " floating around, but most of them have bugs or" " they are extreamely slow and CPU time hungry.") (help "This xprzmodem.library v2.52t provides a special parameter" " called T like TransAmiga. If the library is in" " this mode it accepts upload resumes only if there" " is no .Desc file.\n\n.Desc files are made by TransAmiga" " as soon as the file is received completely and" " written to the filelist. So it's save to say:" "\n\nIf there is a .Desc file no resume is allowed." "\n\nThis is the whole secret of the library." "The library is compiled by Georg 'Gio' Magschok." "\n\nSeveral SysOps reported problems with v3.x" " of xprzmodem.library. The library is localized" " and needs a lot of CPU time. This can lead to" " transmission errors especially with higher" " speeds. If you have a really fast CPU you may" " never come accross this phenomen, but if you" " do not use a serial board (e.g. MFC) I strongly" " suggest to use the supplied version as it works" " perfectly.") (source (tackon (tackon (pathonly @icon) "Libs") #libname)) (dest "Libs:") (newname "xprzmodem.library") (confirm) (optional force askuser) ) ; end of copyfiles (complete 50) ; install FIFO for TrShell (if (askbool (prompt "Do you wish to install" " Fifo library and files? [Read help for more" " information]") (help "The fifo.library and handler are" " necessary to use TrShell the BBS shell which allows" " the SysOp and CoSysOps to use \"Amiga's Shell\"" " from the BBS and do some cleanup or other" " important stuff that can not be done from the" " BBS itself. The shell can be used remotely. This" " means the sysop can log into the BBS via" " modem and use the shell as if he would be at home." " Some restrictions are there, e.g. cursor keys are" " not working in the current version. The shell can" " be used to run door games from several other BBS" " packages. If you use it in this matter I have to warn" " you! When the program fails - perhaps by a user" " pressing CTRL-C - he can get into the shell and" " format your drives! Use FailAt at the beginning" " of the shell-script that is executed to run the" " program. Set it to a high value e.g. FailAt 9999" " and you should be safe that noone can breack in" " and kill your system. Netherless you should test" " it yourself! Test if you can break the program" " and enter the shell. If this happens you should" " not give public access to the door. You can use" " a commandline switch to disable CTRL-C. If you have" " problems ask me (Sami Radwan) or any" " other \"Official Support SysOp\" or a TransAmiga" " SysOp you know well so there will be no" " \"backdoors\" that allow them entering the shell.") (default 1) (choices "Install Fifo" "Skip this part") ) ; end of askbool ( ; start positive part (copyfiles (prompt "Copying fifo handler...") (help "fifo-handler is the needed handler.") (source (tackon (pathonly @icon) "l/fifo-handler")) (dest "l:") (confirm) (optional force) ) (copylib (prompt "Copying fifo library...") (help "the needed library is to be copied") (source (tackon (pathonly @icon) "libs/fifo.library")) (dest "libs:") (confirm) (optional force) ) (startup "Fifo" (prompt "Adding fifo start entry to user-startup") (help "This has to be done to use fifo.") (command "run nil: l:fifo-handler\n") ) ) ; end of positice part & fifo installation ) ; end of fifo installation (complete 55) ; make the master config file (set #sysname (askstring (prompt "Enter the FULL name of the SysOp [use" " only 80 characters or you will have" " trouble to use the BBS.]") (help "The name of the SysOp is needed. Normally" " this should be your complete name in" " normal order. Maximum is 80 characters.") (default "") ) ) ; sysop name should be entered now (set #bbsname (askstring (prompt "Enter the name you wish to give your BBS") (help "The name of your BBS should be something" " that's not used by everybody. It is the" " title of the BBS. For example" " \"Amiga on Phone\" is the name of my BBS.") (default "BBS") ) ) (set #idletime (asknumber (prompt "Enter the idle time after that a user is" " logged off") (help "The idle time indicates how long a user can" " enter nothing and is considered as acive." " If the time is passed the user is logged" " off with the comment \"User inactivity" " logoff...\" and the BBS is free for the" " next caller.") (range 60 3600) (default 180) ) ) (set #syspath (tackon #bbspath "System")) (if (not (exists #syspath)) (makedir #syspath) ) (set #cfgpath (tackon #bbspath "Configs")) (if (not (exists #cfgpath)) (makedir #cfgpath) ) (if (not (exists (tackon #bbspath "Files"))) (makedir (tackon #bbspath "Files")) ) (if (not (exists (tackon #bbspath "Files/Uploads"))) (makedir (tackon #bbspath "Files/Uploads")) ) (textfile (prompt "Generating Files.BBS file...") (help "This file tells TransAmiga which" " files are in the area.") (dest (tackon #bbspath "Files/Uploads/Files.BBS")) (append "\\Place your uploads here\n\\\n") ) (set #userpath (tackon #bbspath "Users")) (if (not (exists #userpath)) (makedir #userpath) ) (set #textpath (tackon #bbspath "Text")) (if (not (exists #textpath)) (makedir #textpath) ) (set #rexxpath (tackon #bbspath "Rexx")) (if (not (exists #rexxpath)) (makedir #rexxpath) ) (set #bulletinpath (tackon #bbspath "Bulletins")) (if (not (exists #bulletinpath)) (makedir #bulletinpath) ) (set #extrapath (tackon #bbspath "Extras")) (if (not (exists #extrapath)) (makedir #extrapath) ) (set #maxbaud (asknumber (prompt "Enter the maximum DTE baud rate your modem" " supports.") (help "DTE is the Data Terminal Equipment. DTE baud" " rate means the locked baud rate if your modem" " is a 'high speed' modem and the highest connect" " rate if your modem does not support locking of" " the baudrate.") (range 110 115200) (default 38400) ) ) (set #minbaud (asknumber (prompt "Enter the minimum baudrate you want to" " allow people to connect to your modem.") (help "If the user connects with a lower baud rate" " he will be toled that his connect rate is" " too slow and logged off. You should set" " this at least to 1200. I have several users" " who have a 1200 baud modem so I set it to" " this. If you don't want people to connect" " with such a really slow baudrate set this" " to something higher. e.g. 2400") (range 110 115200) (default 1200) ) ) (set #mdmanswer (askstring (prompt "Enter the modem answer string") (help "If you want TransAmiga to answer the" " phone itself you should use the default." " If you want the modem to answer itself" " delete the default and enter nothing.") (default "~~ATA|") ) ; end of askstring ) (set #mdminit (askstring (prompt "Enter the initialisation command for your" " modem [read the help if you don't know]") (help "The initialisation command is very" " essential. It varies on your needs and on" " the modem you use. There is no real" " standard. Most modems have \"Hayes\"" " compatible commands. The default string" " that is given works with several modems." " The important thing is that you let the" " modem answer incomming calls itself if you" " deleted the modem answer string of the last" " question.\n" " Normally the modem answers the phone itself" " if you use ATS0=1. AT is the" " command introducter and means \"ATTENTION\"" ". S0=1 sets the S-register 0 to the value 1." " The effect is that the modem answers the" " line as soon as it detects 1 ring. A complete" " init string would be ATZ|~~~ATX4M0S0=1|.\nHave a" " look to your modem manual to have more" " detailed information about this. The modem" " also has to return \"verbal\" result codes" " and not numerical. Read TransAmiga manual" " to find out a bit more about this and also" " read your modem manual.") ; change help text!!! (default "ATZ|~~~ATX4M0|~") ) ) (set #mdmexit (askstring (prompt "Enter the modem exit string that is used" " when a user leaves the BBS.") (help "The exit string is used to reset the modem" " when the connection is terminated. Again:" " read TransAmiga manual and check your" " modem manual. The default string should be" " ok for most modems.") (default "ATZ|") ) ) (set #mdmaoff (askstring (prompt "Enter the modem command that should be" " executed when you log on locally.") (help "This command is send to the modem when you" " log on locally. This means you do not need" " to use a modem to enter the BBS. Instad you" " can select \"local logon\" from the pull" " down menu or use the shortcut. The command" " is used to let the modem go off hook." " ATTENTION! In some countries the phone" " companies don't like this, so be carefull" " and inform yourself. The default string" " takes the modem off hook. You can also use" " ATS0=99 and the modem will never answer the" " phone when it rings.") (default "ATH1|") ) ) (set #mdmaon (askstring (prompt "Enter the modem command that should be" " executed when you have finished your" " local logon.") (help "This is just the matching command for the" " one you just entered. If you used ATS0=99|" " you should now use ATS0=1|. If you used" " the default string you should use it now" " again.") (default "ATH0|") ) ) (set #serialdev (askstring (prompt "Enter the name of the serial device.") (help "This is the device that is compatible to" " the original serial.device delivered by" " Commodore. If you use the internal serial" " port or the A2232 card you use the default" " \"serial.device\". If you use a product" " from a third party [e.g. MultiFaceCard II" " by bsc] you have to use the device that" " is delivered with the product" " [e.g. \"duart.device\" when you use MFC II]") (default "serial.device") ) ) (set #serialunit (asknumber (prompt "Enter the unit number you want to use.") (help "The unit number indicates which port you" " wish to use. When you use the internal" " port this number is 0. When you use the" " first port of A2232 the unit is 2. When" " you use the first port of MFC II the" " number is 0. Now you should know which" " number you have to use.") (range 0 100) (default 0) ) ) (set #defaccess (asknumber (prompt "Enter the access that is given to new" " users. Read the help part if you don't" " know what it is.") (help "New users are users who have just joind the" " BBS. Normally that are first time callers" " who want to use your BBS regularily. The" " valid range is 1 to 255. I suggest to use" " something around 5 as you had no chance to" " check validate the user and check if his" " input of the join procedure is true. 255" " is suggested to be SysOp access. You" " should *never* give it to any user then" " yourself.") (range 1 255) (default 5) ) ) (set #deflimit (asknumber (prompt "Enter the time limit that is given to new" " users.") (help "Again: the user is not validated and has" " just filled in the user application. This" " is the time the user gets every day untill" " you validate him/her. Valid range is 1 to" " 255. You never should set the time to a" " value lower than 10 I suggest at least 30.") (range 1 255) (default 25) ) ) (set #defratio (asknumber (prompt "Enter the file ratio that is given to new" " users.") (help "file ratio: This defines how many files a" " user can download before he is forced to" " upload a file. As soon as a file has been" " uploaded the user can download again the" " number of files you specify here. 255" " disables the ratio completely.") (range 1 255) (default 20) ) ) (set #newbyte (asknumber (prompt "Enter the byteratio for new users.") (help "This is similar to file ratio but is based" " on the byte counting. 0 disables this type" " of ratio. The maximum is 2147483647.") (range 0 2147483647) (default 0) ) ) (set #defflags (asknumber (prompt "This is a bit complicated. You can use" " flags in the BBS for the commands. You" " can use them to group users in" " conjunction with user level. Flags are" " independant from userlevel. If a user" " should have access to a command or" " file/message area both, accesslevel and" " flags must allow it. Here you enter flags" " in numerical form. TransAmiga displays" " them if an other form: --X----X. Read the" " help to get more information.") (help "The flags are a bit complicated as I have no" " time to write a conversion routine for the" " Installer. TransAmiga allowas 8 flags. The" " display in the BBS is the following:" " -------- A X represents an active flag a" " dash '-' represents an unset flag. 8 - are" " the equivalent of 8 unset flags. The" " corresponding number is 0. The flags are" " stored internally in a byte so each flag" " has a corresponding number. The number is" " calculated inverse. Normally the decimal" " number of bytes is calculated from the" " right to left but we calculate it from" " left to right. Read the tech.doc for more" " detailed information. If you don't know" " how the flags work you should use 0 for" " now. You can alter this when you are more" " familar with the BBS.") (range 0 255) (default 0) ) ) (set #privacc (asknumber (prompt "Enter the access level for privileged" " access.") (help "This is the access level that gives you" " power. If you have this access you can" " read privileged mail. This means you can" " read ALL mail that is written in the BBS." " This access is for CoSysOps and SysOp" " only. Use it carefully. You should give" " this access only very few people. A user" " has this access when his access level is" " equivalent or higher.") (range 1 255) (default 250) ) ) (set #gtime (asknumber (prompt "Enter the time for guest callers.") (help "The guest time is the time a user gets when" " he loggs on the first time. There should" " be enouh time to play a bit around so the" " guest can decide if he want to join the" " BBS. I suggest 20 minutes.") (range 1 255) (default 20) ) ) (set #gratio (asknumber (prompt "Enter the file ratio for guest callers") (help "File ratio has been explained earlier. If" " you did not read it then I strongly" " suggest to read the manual. Remember the" " user calls for the first time. At least he" " should be able to download your filelist." " I suggest 5 and it's default.") (range 1 255) (default 5) ) ) (set #gbyte (asknumber (prompt "Enter the byteratio you wish for" " guest users.") (help "This is similar to file ratio but is based" " on the byte counting. 0 disables this type" " of ratio. The maximum is 2147483647.") (range 0 2147483647) (default 0) ) ) (if (askbool (prompt "You you want TransAmiga on a custom screen?") (help "When TransAmiga starts up it needs a screen for" " it's windows. A custom screen is just a screen" " that is opened by TransAmiga itself. If you don't" " like TransAmiga to run at an own screen select" " \"Workbench Screen\" and TransAmiga will open the" " windows on the Workbench or any other screen that" " is the default screen in the system.\n\nThe colours" " of that screen are used. This meens you will not" " have the proper colours on your TransAmiga" " windows in most cases. If TransAmiga opens it's" " own screen the colours are set to ANSI colors so" " you will have the") (default 0) (choices "Workbench screen" "Custom screen") ) ; end of askbool (set #scrntype 0) ; choose interlace or not ((if (askbool (prompt "Do you wish an interlaced screen?") (help " for TransAmiga loaced screen\".\n\nInterlace" " doubles the horizontal number of lines." " This is done by displaying just every" " second line in one display period. If you" " use interlace without a flicker fixer the" " monitor shows an ugly flickering that is" " in no way good for the eyes.") (default 0) (choices "interlaced screen" "noninterlaced screen") ) ; end of askbool (set #scrntype 4) (set #scrntype 2) ) ; end of if (set #scrnplanes (asknumber (prompt "Enter the number of" " bitplanes for the" " screen.") (help "The bitplane number defines" " the number of colours. For" " two colours specify 1, for" " 4 colours specify 2, 8" " colour value is 3 and for 16" " colours use 4.") (range 1 4) (default 3) ) ) (set #scrnw (asknumber (prompt "Enter the width of the screen. [0" " tells TransAmiga to use the same" " width as the default screen -" " Workbench normally.]") (help "The width of the screen is the" " maximim x coordinate. It indicates" " how many pixel are used" " horizontally for the screen. I" " suggest to use a slight overscan" " so you have full 80 characters on" " the screen. If you use normal" " screen width (640) you get 80" " characters in a line normally, but" " as we use windows with borders you" " need more pixel to display 80" " characters a line instide the" " border.") (range 0 6000) (default 650) ) ) ; screen width is set now (set #scrnh (asknumber (prompt "Enter the hight of the screen. [0" " tells TransAmiga again to use" " the same as the default screen.]") (help "the standard screen width in NTSC" " is 200. If interlace is used it is" " 400. If you have a pal system the" " standard display has 256 pixel and" " when you use interlace it is 512." " I suggest to use the same hight you" " use on your default screen. You can" " do this by entering 0 and" " TransAmiga always catches the" " information from the default" " screen.\n\nYou may change the size of" " the default screen and TransAmiga" " will use it at startup. Naturally" " TransAmiga does not change the" " screen size if it is allready" " running and you change the size of" " the default screen.") (range 0 6000) (default 0) ) ) ; screen hight is set now (if (askbool (prompt "Do you wish to open a blue backdrop window?") (help "This makes a blue background if you" " use TransAmiga on a custom screen.") (default 1) (choices "use backdrop" "don't use backdrop") ) (set #backdrop 1) (set #backdrop 0) ) ; end of if ) ; end of positive part - Custom screen choosen ((set #scrntype 0) (set #scrnw 640) (set #scrnh 0) )) ; end of negative part & if - WB screen choosen (set #termx (asknumber (prompt "Enter the x-coordinate of the top" " left corner of the terminal" " window.") (help "The terminal window is the window" " where everything is displayed what" " the user sees. I suggest to use 0" " so that the window's left border" " is as left as possible.") (range 0 6000) (default 0) ) ) (set #termy (asknumber (prompt "Enter the y-coordinate of the top" " left corner of the terminal" " window.") (help "If you want to see the screen title" " you should place the window" " directly under it. If you don't" " need to see the screen title at" " any time you should use 0.") (range 0 6000) (default 11) ) ) (set #termw (asknumber (prompt "Enter the width of the terminal" "window. [0 tells TransAmiga to" " use the highest possible value]") (help "This should be the same as the" " screen width. If you set this to a" " lower value you don't need such a" " big screen. That would be waste of" " chip memory.") (range 0 6000) (default 0) ) ) ; terminal window width is set now (set #termh (asknumber (prompt "Enter the hight of the terminal" " window. [0 tells TransAmiga" " again to use the highest possible" " value.]") (help "This should be the screen length" " minus the y coordinate you entered" " before. If you enter a too high" " value it will be adjusted to a" " valid number internally.") (range 0 6000) (default 0) ) ) ; terminal window hight is set now (if (askbool (prompt "Dou you want a sizing gadget on your" " terminal window?") (help "Normally this should not be necessary" " It's just waste of space in your window." " I personally prefer to have none but if" " you need to adjust the size of the window" " use it.") (default 0) (choices "sizing gadget" "no sizing gadget") ) (set #sizegad 1) (set #sizegad 0) ) ; sizing gadget choose finished (set #fontname (askstring (prompt "Which font do you want to use in" " the terminal window?") (help "I strongly suggest to use the" " delivered font or any other IBM" " compatible font.") (default "TransIBM.font") ) ; end of askstring ) ; font name is choosen (set #fontsize (asknumber (prompt "Enter the font size you want to" " use.") (help "The TransIBM.font comes just in one" " size: 8. I suggest not to use" " higher values unless you have a" " bigger overscan. The AmigaOS can" " adjust the font to any size you" " wish. I don't know when this" " feature was added but AmigaOS 3.0" " is surely able to do this. If you" " want to know if your system can" " do it just start the prefs program" " for fonts, choose TransIBM and" " enter 11 for the size. If the" " display of the font changes your" " system is able to adust fontsize.") (range 3 100) (default 8) ) ) ; font size choosen (set #cli (asknumber (prompt "Enter the ANSI colour number you" " wish the BBS to use for input.") (help "There exist 8 ANSI colours that" " are numbered from 0 to 7. If you" " want to know more about ANSI" " colours then read the" " corresponding part of the Docs.") (range 0 7) (default 7) ) ) ; input colour choosen (set #clp (asknumber (prompt "Enter the ANSI colour number you" " wish the BBS to use for prompts.") (help "There exist 8 ANSI colours that" " are numbered from 0 to 7. If you" " want to know more about ANSI" " colours then read the" " corresponding part of the Docs.") (range 0 7) (default 3) ) ) ; prompt colour choosen (set #clt (asknumber (prompt "Enter the ANSI colour number you" " wish the BBS to use for text trim.") (help "There exist 8 ANSI colours that" " are numbered from 0 to 7. If you" " want to know more about ANSI" " colours then read the" " corresponding part of the Docs.") (range 0 7) (default 4) ) ) ; text trim colour choosen (if (askbool (prompt "Do you want to use an input field for" " ANSI callers?") (help "The input filed shows the user how many" " letters he can enter at a prompt.") (default 1) (choices "use input field" "no input field") ) (set #promptfield 1) (set #promptfield 0) ) ; input field choosen (set #loglevel (asknumber (prompt "Enter the loglevel for the ammount of" " output to the logfile.") (help "The higher the loglevel the more" " TransAmiga writes to the logfile." " Experience showed that 6 is a good" " value as all important info is stored." "\n\n11 is only for debugging and makes" " really large logfiles and slows" " execution down a lot. There should" " never be the need for you to use such a" " high loglevel.") (range 0 11) (default 6) ) ) (set #taskpri (asknumber (prompt "Enter the priority of TransAmiga's main" " task.") (help "The tast priority tells the operating" " system (AmigaOS) how many CPU-time this" " program will get. The higher the priority" " the more time it will get and the slower" " the other tasks are.\n\nNormally most" " programs start with priority 0. That is" " a good value and should make no problems." " Change the value only if you know what" " you do!") (range -3 3) (default 0) ) ) (if (askbool (prompt "Do you want that the users online time is" " decreased while chat?") (help "If the users time is decreased while chat it" " may happen that he is logged off as soon" " as he leaves the chat due to no left" " onlinetime.") (default 1) (choices "decrease time" "stop time") ) (set #chatdec 0) (set #chatdec 1) ) (set #mainconfig (cat #syspath "\n" #cfgpath "\n" #userpath "\n" #textpath "\n" #bulletinpath "\n" #extrapath "\n" #rexxpath "\n" #maxbaud "\n" #mdminit "\n" #mdmexit "\n" #mdmaoff "\n" #mdmaon "\n" #serialdev "\n" #serialunit "\n" #deflimit "\n" #defratio "\n" #defacc "\n" #defflags "\n" #privacc "\n" #idletime "\n" #bbsname "\n" #sysname "\n" #scrntype "\n" #scrnplanes "\n" #backdrop "\n" #scrnw "\n" #scrnh "\n" #termx "\n" #termy "\n" #termw "\n" #termh "\n" #fontname "\n" #fontsize "\n" #cli "\n" #clp "\n" clt "\n" #minbaud "\n" #sizegad "\n" #promptfield "\n" #gtime "\n" #gratio "\n" #mdmanswer "\n" #loglevel "\n" #newbyte "\n" #gbyte "\n" #taskpri "\n" #chatdec "\n\n\n\n\n\n\n") ) (textfile (prompt "Generating master configuration file...") (help "The data you have entered is used to" " generate the main configuration file.") (dest (tackon #cfgpath "TransAmiga.cfg")) (append #mainconfig) (confirm) ) ; master configuration file is written (complete 70) ; make a Message.cfg file (set #msgconfig (cat "1\n\n\n\n\n\n\n\n\n\n" #sysname "\n1\n" "BBS:Bin/TAEd %f -n%n -q%q\n" "BBS:Bin/TAEd %f -n%n -q%q\n" "0\n1\n\n\n1\nPrivate mail\n" "BBS:Mail/Private/\n1\n0\n" "0\n0\n0\n0\n\n" "In a message of %d, %n wrote to %a:\n" "0\n\n") ) (textfile (prompt "Generating message configuration file...") (help "The data you have entered is used to" " generate the message configuration file." "\n\nAs this is a really basic setup only one" " message conference will be created.") (dest (tackon #cfgpath "Message.cfg")) (append #msgconfig) (confirm) ) ; message configuration file is written (if (not (exists (tackon #bbspath "Mail"))) (makedir (tackon #bbspath "Mail")) ) (if (not (exists (tackon #bbspath "Mail/Private"))) (makedir (tackon #bbspath "Mail/Private")) ) (textfile (prompt "Generating Message.BBS file...") (help "This file tells TransAmiga how many" "messages are in the conference") (dest (tackon #bbspath "Mail/Private/Message.BBS")) (append "200\n0\n0\n") ) (textfile (prompt "Generating LastRead.BBS file...") (help "This file tells TransAmiga which" "message was the last the user read") (dest (tackon #bbspath "Mail/Private/LastRead.BBS")) (append "\0\0") ) (complete 75) ; make a userfile for the sysop (message "The next set of questions is necessary to generate" " a userfile for the sysop. Please answer all" " questions to your best knowledge.") (set #street (askstring (prompt "Enter the street you live in.") (help "This is your street addess. Should" " be easy to answer.") (default "") ) ; end of askstring ) (set #city (askstring (prompt "Enter the name of the city you live in.") (help "This is the name only. Postal code is" " asked later so don't include it here.") (default "") ) ; end of askstring ) (set #province (askstring (prompt "Enter the province you live in.") (help "This is NOT the country! Enter your" " state, territory or whatever.") (default "") ) ; end of askstring ) (set #phone (askstring (prompt "Enter your phone number.") (help "This is your voice phone number. Should" " be easy to answer.") (default "") ) ; end of askstring ) (set #computer (askstring (prompt "Enter the type of your computer.") (help "This really should" " be easy to answer.") (default "") ) ; end of askstring ) (set #birth (askstring (prompt "Enter your birth date. ATTENTION!" " the format is YYMMDD") (help "This is your birth date. A special" " format is used: YYMMDD.\nYY means" " that you enter the year in two digits." "\nMM is the month in two digits.\nDD is" " the day in two digits.\n\nExample: Your" " birth date is 2nd january 1960 so you" " would enter 600102. Easy, isn't it?") (default "") ) ; end of askstring ) (set #pcode (askstring (prompt "Enter your postal code.") (help "This is your postal code. Should" " be easy to answer.") (default "") ) ; end of askstring ) (set #pswd (askstring (prompt "Enter the password for logon. (10 chars max.)") (help "You need the password every time you log" " onto the BBS yourself. The maximum is 10" " characters. Use something you remember" " but noone can guess easily.") (default "") ) ; end of askstring ) (set #userfile (cat street "\n" city "\n" province "\n" phone "\n" computer "\n" birth "\n" pcode "\n\n" "940801\n" pswd "\n0\n0\n0\n0\n0\n0\n24\n" "0\n255\n255\n0\n1\n1\n255\n65000\n255\n" "1\n1\nDEFAULT\n1\n1\n0\n\n0\n\n\n\n\n\n") ) (if (not (exists (tackon #bbspath "Users"))) (makedir (tackon #bbspath "Users")) ) (textfile (prompt "Generating userfile...") (help "The data you have entered is used to" " generate the sysop userfile.") (dest (tackon (tackon #bbspath "Users") #sysname)) (append #userfile) (confirm) ) ; userfile is written (textfile (prompt "Generating Users.BBS...") (help "This file is needed for making" " new userfiles.") (dest (tackon (tackon #bbspath "Users") "Users.BBS")) (append "0\n") ) ; Users.BBS is written (complete 80) ; *** the following copies ready to use config files *** (message "The further setup is too complex to make it with" " C= Installer. A working setup will be installed" " so you can have a look at the BBS.\n\nIf you want" " to customize edit the config files with a text" " editor or run TransCfg, TransAmiga's setup" " program.") ; copy the config files (copyfiles (prompt "Copying config files...") (help "This are the config files that indicate what" " commandes are displayed in the menus. DO NOT" " ALTER THESE FILES UNLESS YOU KNOW WHAT YOU DO!" " Read the manual carefully about the customisation" " of the BBS if you want to change anything." " The .Rx files are the files that tell the BBS" " which ARexx macros should be included as commands" " in the menu.") (source (tackon (pathonly @icon) "Configs")) (dest (tackon #bbspath "Configs")) (all) (confirm) (optional force) ) ; end of copyfiles (configs) (complete 85) ; add BBS: assign to user-startup (if (askbool (prompt "Do you wish to start TransAmiga from your " "\"User-Startup\"?") (help "If you start TransAmiga from your User-Startup" " it is started at every boot.") (default 1) (choices "Yes" "No") ) ; end of askbool (set #startit (cat "Run >NIL: " (tackon (tackon #bbspath "bin") "TransAmiga\n") )) (set #startit "") ) ; end of if (startup "TransAmiga BBS" (prompt "Add BBS: assign to your User-Startup?") (help "You really should add this assign to your" " User-Startup or the standard setup will fail.") (command (cat "Assign BBS: " #bbspath "\n" #startit)) ) (complete 100) ) ; end of negative part ) ; end of update/script