# Copyright (C) 1989, 1996, 1997 Aladdin Enterprises. All rights reserved. # # This file is part of Aladdin Ghostscript. # # Aladdin Ghostscript is distributed with NO WARRANTY OF ANY KIND. No author # or distributor accepts any responsibility for the consequences of using it, # or for whether it serves any particular purpose or works at all, unless he # or she says so in writing. Refer to the Aladdin Ghostscript Free Public # License (the "License") for full details. # # Every copy of Aladdin Ghostscript must include a copy of the License, # normally in a plain ASCII text file named PUBLIC. The License grants you # the right to copy, modify and redistribute Aladdin Ghostscript, but only # under certain conditions described in the License. Among other things, the # License requires that the copyright notice and this notice be preserved on # all copies. # makefile for device drivers. # Define the name of this makefile. DEVS_MAK=devs.mak ###### --------------------------- Catalog -------------------------- ###### # It is possible to build configurations with an arbitrary collection of # device drivers, although some drivers are supported only on a subset # of the target platforms. The currently available drivers are: # MS-DOS displays (note: not usable with Desqview/X): # MS-DOS EGA and VGA: # ega EGA (640x350, 16-color) # vga VGA (640x480, 16-color) # MS-DOS SuperVGA: # * ali SuperVGA using Avance Logic Inc. chipset, 256-color modes # * atiw ATI Wonder SuperVGA, 256-color modes # * s3vga SuperVGA using S3 86C911 chip (e.g., Diamond Stealth board) # svga16 Generic SuperVGA in 800x600, 16-color mode # * tseng SuperVGA using Tseng Labs ET3000/4000 chips, 256-color modes # * tvga SuperVGA using Trident chipset, 256-color modes # ****** NOTE: The vesa device does not work with the Watcom (32-bit MS-DOS) # ****** compiler or executable. # vesa SuperVGA with VESA standard API driver # MS-DOS other: # bgi Borland Graphics Interface (CGA) [MS-DOS only] # * herc Hercules Graphics display [MS-DOS only] # * pe Private Eye display # Other displays: # MS Windows: # mswindll Microsoft Windows 3.1 DLL [MS Windows only] # mswinprn Microsoft Windows 3.0, 3.1 DDB printer [MS Windows only] # mswinpr2 Microsoft Windows 3.0, 3.1 DIB printer [MS Windows only] # OS/2: # * os2pm OS/2 Presentation Manager [OS/2 only] # * os2dll OS/2 DLL bitmap [OS/2 only] # * os2prn OS/2 printer [OS/2 only] # Unix and VMS: # ****** NOTE: For direct frame buffer addressing under SCO Unix or Xenix, # ****** edit the definition of EGAVGA below. # * att3b1 AT&T 3b1/Unixpc monochrome display [3b1 only] # * lvga256 Linux vgalib, 256-color VGA modes [Linux only] # * sonyfb Sony Microsystems monochrome display [Sony only] # * sunview SunView window system [SunOS only] # + vgalib Linux PC with VGALIB [Linux only] # x11 X Windows version 11, release >=4 [Unix and VMS only] # x11alpha X Windows masquerading as a device with alpha capability # x11cmyk X Windows masquerading as a 1-bit-per-plane CMYK device # x11gray2 X Windows as a 2-bit gray-scale device # x11mono X Windows masquerading as a black-and-white device # Platform-independent: # * sxlcrt CRT sixels, e.g. for VT240-like terminals # Printers: # * ap3250 Epson AP3250 printer # * appledmp Apple Dot Matrix Printer (should also work with Imagewriter) # bj10e Canon BubbleJet BJ10e # * bj200 Canon BubbleJet BJ200 # * bjc600 Canon Color BubbleJet BJC-600, BJC-4000 and BJC-70 # also good for Apple printers like the StyleWriter 2x00 # * bjc800 Canon Color BubbleJet BJC-800 # * ccr CalComp Raster format # * cdeskjet H-P DeskJet 500C with 1 bit/pixel color # * cdjcolor H-P DeskJet 500C with 24 bit/pixel color and # high-quality color (Floyd-Steinberg) dithering; # also good for DeskJet 540C and Citizen Projet IIc (-r200x300) # * cdjmono H-P DeskJet 500C printing black only; # also good for DeskJet 510, 520, and 540C (black only) # * cdj500 H-P DeskJet 500C (same as cdjcolor) # * cdj550 H-P DeskJet 550C/560C/660C/660Cse # * cp50 Mitsubishi CP50 color printer # * declj250 alternate DEC LJ250 driver # + deskjet H-P DeskJet and DeskJet Plus # djet500 H-P DeskJet 500; use -r600 for DJ 600 series # * djet500c H-P DeskJet 500C alternate driver # (does not work on 550C or 560C) # * dnj650c H-P DesignJet 650C # epson Epson-compatible dot matrix printers (9- or 24-pin) # * eps9mid Epson-compatible 9-pin, interleaved lines # (intermediate resolution) # * eps9high Epson-compatible 9-pin, interleaved lines # (triple resolution) # * epsonc Epson LQ-2550 and Fujitsu 3400/2400/1200 color printers # * ibmpro IBM 9-pin Proprinter # * imagen Imagen ImPress printers # * iwhi Apple Imagewriter in high-resolution mode # * iwlo Apple Imagewriter in low-resolution mode # * iwlq Apple Imagewriter LQ in 320 x 216 dpi mode # * jetp3852 IBM Jetprinter ink-jet color printer (Model #3852) # + laserjet H-P LaserJet # * la50 DEC LA50 printer # * la70 DEC LA70 printer # * la70t DEC LA70 printer with low-resolution text enhancement # * la75 DEC LA75 printer # * la75plus DEC LA75plus printer # * lbp8 Canon LBP-8II laser printer # * lips3 Canon LIPS III laser printer in English (CaPSL) mode # * ln03 DEC LN03 printer # * lj250 DEC LJ250 Companion color printer # + ljet2p H-P LaserJet IId/IIp/III* with TIFF compression # + ljet3 H-P LaserJet III* with Delta Row compression # + ljet3d H-P LaserJet IIID with duplex capability # + ljet4 H-P LaserJet 4 (defaults to 600 dpi) # + lj4dith H-P LaserJet 4 with Floyd-Steinberg dithering # + ljetplus H-P LaserJet Plus # lj5mono H-P LaserJet 5 & 6 family (PCL XL), bitmap: # see below for restrictions & advice # lj5gray H-P LaserJet 5 & 6 family, gray-scale bitmap; # see below for restrictions & advice # * lp2563 H-P 2563B line printer # * lp8000 Epson LP-8000 laser printer # * lq850 Epson LQ850 printer at 360 x 360 DPI resolution; # also good for Canon BJ300 with LQ850 emulation # * m8510 C.Itoh M8510 printer # * necp6 NEC P6/P6+/P60 printers at 360 x 360 DPI resolution # * nwp533 Sony Microsystems NWP533 laser printer [Sony only] # * oce9050 OCE 9050 printer # * oki182 Okidata MicroLine 182 # * okiibm Okidata MicroLine IBM-compatible printers # * paintjet alternate H-P PaintJet color printer # * pj H-P PaintJet XL driver # * pjetxl alternate H-P PaintJet XL driver # * pjxl H-P PaintJet XL color printer # * pjxl300 H-P PaintJet XL300 color printer; # also good for PaintJet 1200C # (pxlmono) H-P black-and-white PCL XL printers (LaserJet 5 and 6 family) # (pxlcolor) H-P color PCL XL printers (none available yet) # * r4081 Ricoh 4081 laser printer # * sj48 StarJet 48 inkjet printer # * sparc SPARCprinter # * st800 Epson Stylus 800 printer # * stcolor Epson Stylus Color # * t4693d2 Tektronix 4693d color printer, 2 bits per R/G/B component # * t4693d4 Tektronix 4693d color printer, 4 bits per R/G/B component # * t4693d8 Tektronix 4693d color printer, 8 bits per R/G/B component # * tek4696 Tektronix 4695/4696 inkjet plotter # * uniprint Unified printer driver -- Configurable Color ESC/P-, # ESC/P2-, HP-RTL/PCL mono/color driver # * xes Xerox XES printers (2700, 3700, 4045, etc.) # Fax systems: # * dfaxhigh DigiBoard, Inc.'s DigiFAX software format (high resolution) # * dfaxlow DigiFAX low (normal) resolution # Fax file format: # ****** NOTE: all of these drivers adjust the page size to match # ****** one of the three CCITT standard sizes (U.S. letter with A4 width, # ****** A4, or B4). # faxg3 Group 3 fax, with EOLs but no header or EOD # faxg32d Group 3 2-D fax, with EOLs but no header or EOD # faxg4 Group 4 fax, with EOLs but no header or EOD # tiffcrle TIFF "CCITT RLE 1-dim" (= Group 3 fax with no EOLs) # tiffg3 TIFF Group 3 fax (with EOLs) # tiffg32d TIFF Group 3 2-D fax # tiffg4 TIFF Group 4 fax # High-level file formats: # epswrite EPS output (like PostScript Distillery) # pdfwrite PDF output (like Adobe Acrobat Distiller) # pswrite PostScript output (like PostScript Distillery) # pxlmono Black-and-white PCL XL # pxlcolor Color PCL XL # Other raster file formats and devices: # bit Plain bits, monochrome # bitrgb Plain bits, RGB # bitcmyk Plain bits, CMYK # bmpmono Monochrome MS Windows .BMP file format # bmp16 4-bit (EGA/VGA) .BMP file format # bmp256 8-bit (256-color) .BMP file format # bmp16m 24-bit .BMP file format # cgmmono Monochrome (black-and-white) CGM -- LOW LEVEL OUTPUT ONLY # cgm8 8-bit (256-color) CGM -- DITTO # cgm24 24-bit color CGM -- DITTO # * cif CIF file format for VLSI # jpeg JPEG format, RGB output # jpeggray JPEG format, gray output # miff24 ImageMagick MIFF format, 24-bit direct color, RLE compressed # * mgrmono 1-bit monochrome MGR devices # * mgrgray2 2-bit gray scale MGR devices # * mgrgray4 4-bit gray scale MGR devices # * mgrgray8 8-bit gray scale MGR devices # * mgr4 4-bit (VGA) color MGR devices # * mgr8 8-bit color MGR devices # pcxmono PCX file format, monochrome (1-bit black and white) # pcxgray PCX file format, 8-bit gray scale # pcx16 PCX file format, 4-bit planar (EGA/VGA) color # pcx256 PCX file format, 8-bit chunky color # pcx24b PCX file format, 24-bit color (3 8-bit planes) # pcxcmyk PCX file format, 4-bit chunky CMYK color # pbm Portable Bitmap (plain format) # pbmraw Portable Bitmap (raw format) # pgm Portable Graymap (plain format) # pgmraw Portable Graymap (raw format) # pgnm Portable Graymap (plain format), optimizing to PBM if possible # pgnmraw Portable Graymap (raw format), optimizing to PBM if possible # pnm Portable Pixmap (plain format) (RGB), optimizing to PGM or PBM # if possible # pnmraw Portable Pixmap (raw format) (RGB), optimizing to PGM or PBM # if possible # ppm Portable Pixmap (plain format) (RGB) # ppmraw Portable Pixmap (raw format) (RGB) # pkm Portable inKmap (plain format) (4-bit CMYK => RGB) # pkmraw Portable inKmap (raw format) (4-bit CMYK => RGB) # pngmono Monochrome Portable Network Graphics (PNG) # pnggray 8-bit gray Portable Network Graphics (PNG) # png16 4-bit color Portable Network Graphics (PNG) # png256 8-bit color Portable Network Graphics (PNG) # png16m 24-bit color Portable Network Graphics (PNG) # psmono PostScript (Level 1) monochrome image # psgray PostScript (Level 1) 8-bit gray image # sgirgb SGI RGB pixmap format # tiff12nc TIFF 12-bit RGB, no compression # tiff24nc TIFF 24-bit RGB, no compression (NeXT standard format) # tifflzw TIFF LZW (tag = 5) (monochrome) # tiffpack TIFF PackBits (tag = 32773) (monochrome) # User-contributed drivers marked with * require hardware or software # that is not available to Aladdin Enterprises. Please contact the # original contributors, not Aladdin Enterprises, if you have questions. # Contact information appears in the driver entry below. # # Drivers marked with a + are maintained by Aladdin Enterprises with # the assistance of users, since Aladdin Enterprises doesn't have access to # the hardware for these either. # If you add drivers, it would be nice if you kept each list # in alphabetical order. ###### ----------------------- End of catalog ----------------------- ###### # As noted in gs.mak, DEVICE_DEVS and DEVICE_DEVS1..15 select the devices # that should be included in a given configuration. By convention, these # are used as follows. Each of these must be limited to about 10 devices # so as not to overflow the 120 character limit on MS-DOS command lines. # DEVICE_DEVS - the default device, and any display devices. # DEVICE_DEVS1 - additional display devices if needed. # DEVICE_DEVS2 - dot matrix printers. # DEVICE_DEVS3 - H-P monochrome printers. # DEVICE_DEVS4 - H-P color printers. # DEVICE_DEVS5 - additional H-P printers if needed. # DEVICE_DEVS6 - other ink-jet and laser printers. # DEVICE_DEVS7 - fax file formats. # DEVICE_DEVS8 - PCX file formats. # DEVICE_DEVS9 - PBM/PGM/PPM file formats. # DEVICE_DEVS10 - black-and-white TIFF file formats. # DEVICE_DEVS11 - BMP and color TIFF file formats. # DEVICE_DEVS12 - PostScript image and 'bit' file formats. # DEVICE_DEVS13 - PNG file formats. # DEVICE_DEVS14 - CGM, JPEG, and MIFF file formats. # DEVICE_DEVS15 - high-level (PostScript and PDF) file formats. # Feel free to disregard this convention if it gets in your way. # If you want to add a new device driver, the examples below should be # enough of a guide to the correct form for the makefile rules. # Note that all drivers other than displays must include page.dev in their # dependencies and use $(SETPDEV) rather than $(SETDEV) in their rule bodies. # All device drivers depend on the following: GDEV=$(AK) $(ECHOGS_XE) $(gserrors_h) $(gx_h) $(gxdevice_h) # "Printer" drivers depend on the following: PDEVH=$(AK) $(gdevprn_h) # Define the header files for device drivers. Every header file used by # more than one device driver family must be listed here. gdev8bcm_h=gdev8bcm.h gdevpccm_h=gdevpccm.h gdevpcfb_h=gdevpcfb.h $(dos__h) gdevpcl_h=gdevpcl.h gdevsvga_h=gdevsvga.h gdevx_h=gdevx.h ###### ----------------------- Device support ----------------------- ###### # Provide a mapping between StandardEncoding and ISOLatin1Encoding. gdevemap.$(OBJ): gdevemap.c $(AK) $(std_h) # Implement dynamic color management for 8-bit mapped color displays. gdev8bcm.$(OBJ): gdev8bcm.c $(AK) \ $(gx_h) $(gxdevice_h) $(gdev8bcm_h) ###### ------------------- MS-DOS display devices ------------------- ###### # There are really only three drivers: an EGA/VGA driver (4 bit-planes, # plane-addressed), a SuperVGA driver (8 bit-planes, byte addressed), # and a special driver for the S3 chip. # PC display color mapping gdevpccm.$(OBJ): gdevpccm.c $(AK) \ $(gx_h) $(gsmatrix_h) $(gxdevice_h) $(gdevpccm_h) ### ----------------------- EGA and VGA displays ----------------------- ### # The shared MS-DOS makefile defines PCFBASM as either gdevegaa.$(OBJ) # or an empty string. gdevegaa.$(OBJ): gdevegaa.asm # NOTE: for direct frame buffer addressing under SCO Unix or Xenix, # change gdevevga to gdevsco in the following line. Also, since # SCO's /bin/as does not support the "out" instructions, you must build # the gnu assembler and have it on your path as "as". EGAVGA=gdevevga.$(OBJ) gdevpcfb.$(OBJ) gdevpccm.$(OBJ) $(PCFBASM) #EGAVGA=gdevsco.$(OBJ) gdevpcfb.$(OBJ) gdevpccm.$(OBJ) $(PCFBASM) gdevevga.$(OBJ): gdevevga.c $(GDEV) $(memory__h) $(gdevpcfb_h) $(CCD) gdevevga.c gdevsco.$(OBJ): gdevsco.c $(GDEV) $(memory__h) $(gdevpcfb_h) # Common code for MS-DOS and SCO. gdevpcfb.$(OBJ): gdevpcfb.c $(GDEV) $(memory__h) $(gconfigv_h)\ $(gdevpccm_h) $(gdevpcfb_h) $(gsparam_h) $(CCD) gdevpcfb.c # The EGA/VGA family includes EGA and VGA. Many SuperVGAs in 800x600, # 16-color mode can share the same code; see the next section below. ega.dev: $(EGAVGA) $(SETDEV) ega $(EGAVGA) vga.dev: $(EGAVGA) $(SETDEV) vga $(EGAVGA) ### ------------------------- SuperVGA displays ------------------------ ### # SuperVGA displays in 16-color, 800x600 mode are really just slightly # glorified VGA's, so we can handle them all with a single driver. # The way to select them on the command line is with # -sDEVICE=svga16 -dDisplayMode=NNN # where NNN is the display mode in decimal. See use.txt for the modes # for some popular display chipsets. svga16.dev: $(EGAVGA) $(SETDEV) svga16 $(EGAVGA) # More capable SuperVGAs have a wide variety of slightly differing # interfaces, so we need a separate driver for each one. SVGA=gdevsvga.$(OBJ) gdevpccm.$(OBJ) $(PCFBASM) gdevsvga.$(OBJ): gdevsvga.c $(GDEV) $(memory__h) $(gconfigv_h)\ $(gsparam_h) $(gxarith_h) $(gdevpccm_h) $(gdevpcfb_h) $(gdevsvga_h) $(CCD) gdevsvga.c # The SuperVGA family includes: Avance Logic Inc., ATI Wonder, S3, # Trident, Tseng ET3000/4000, and VESA. ali.dev: $(SVGA) $(SETDEV) ali $(SVGA) atiw.dev: $(SVGA) $(SETDEV) atiw $(SVGA) tseng.dev: $(SVGA) $(SETDEV) tseng $(SVGA) tvga.dev: $(SVGA) $(SETDEV) tvga $(SVGA) vesa.dev: $(SVGA) $(SETDEV) vesa $(SVGA) # The S3 driver doesn't share much code with the others. s3vga_=gdevs3ga.$(OBJ) gdevsvga.$(OBJ) gdevpccm.$(OBJ) s3vga.dev: $(SVGA) $(s3vga_) $(SETDEV) s3vga $(SVGA) $(ADDMOD) s3vga -obj $(s3vga_) gdevs3ga.$(OBJ): gdevs3ga.c $(GDEV) $(gdevpcfb_h) $(gdevsvga_h) $(CCD) gdevs3ga.c ### ------------ The BGI (Borland Graphics Interface) device ----------- ### cgaf.$(OBJ): $(BGIDIR)\cga.bgi $(BGIDIR)\bgiobj /F $(BGIDIR)\cga egavgaf.$(OBJ): $(BGIDIR)\egavga.bgi $(BGIDIR)\bgiobj /F $(BGIDIR)\egavga # Include egavgaf.$(OBJ) for debugging only. bgi_=gdevbgi.$(OBJ) cgaf.$(OBJ) bgi.dev: $(bgi_) $(SETDEV) bgi $(bgi_) $(ADDMOD) bgi -lib $(LIBDIR)\graphics gdevbgi.$(OBJ): gdevbgi.c $(GDEV) $(MAKEFILE) $(gxxfont_h) $(CCC) -DBGI_LIB="$(BGIDIRSTR)" gdevbgi.c ### ------------------- The Hercules Graphics display ------------------- ### herc_=gdevherc.$(OBJ) herc.dev: $(herc_) $(SETDEV) herc $(herc_) gdevherc.$(OBJ): gdevherc.c $(GDEV) $(dos__h) $(gsmatrix_h) $(gxbitmap_h) $(CCC) gdevherc.c ### ---------------------- The Private Eye display ---------------------- ### ### Note: this driver was contributed by a user: ### ### please contact narf@media-lab.media.mit.edu if you have questions. ### pe_=gdevpe.$(OBJ) pe.dev: $(pe_) $(SETDEV) pe $(pe_) gdevpe.$(OBJ): gdevpe.c $(GDEV) $(memory__h) ###### ----------------------- Other displays ------------------------ ###### ### -------------------- The MS-Windows 3.n DLL ------------------------- ### gsdll_h=gsdll.h gdevmswn_h=gdevmswn.h $(GDEV)\ $(dos__h) $(memory__h) $(string__h) $(windows__h)\ gp_mswin.h gdevmswn.$(OBJ): gdevmswn.c $(gdevmswn_h) $(gp_h) $(gpcheck_h) \ $(gsdll_h) $(gsparam_h) $(gdevpccm_h) gdevmsxf.$(OBJ): gdevmsxf.c $(ctype__h) $(math__h) $(memory__h) $(string__h)\ $(gdevmswn_h) $(gsstruct_h) $(gsutil_h) $(gxxfont_h) # An implementation using a DIB filled by an image device. gdevwdib.$(OBJ): gdevwdib.c $(gdevmswn_h) $(gsdll_h) $(gxdevmem_h) mswindll_=gdevmswn.$(OBJ) gdevmsxf.$(OBJ) gdevwdib.$(OBJ) \ gdevemap.$(OBJ) gdevpccm.$(OBJ) mswindll.dev: $(mswindll_) $(SETDEV) mswindll $(mswindll_) ### -------------------- The MS-Windows DDB 3.n printer ----------------- ### mswinprn_=gdevwprn.$(OBJ) gdevmsxf.$(OBJ) mswinprn.dev: $(mswinprn_) $(SETDEV) mswinprn $(mswinprn_) gdevwprn.$(OBJ): gdevwprn.c $(gdevmswn_h) $(gp_h) ### -------------------- The MS-Windows DIB 3.n printer ----------------- ### mswinpr2_=gdevwpr2.$(OBJ) mswinpr2.dev: $(mswinpr2_) page.dev $(SETPDEV) mswinpr2 $(mswinpr2_) gdevwpr2.$(OBJ): gdevwpr2.c $(PDEVH) $(windows__h)\ $(gdevpccm_h) $(gp_h) gp_mswin.h ### ------------------ OS/2 Presentation Manager device ----------------- ### os2pm_=gdevpm.$(OBJ) gdevpccm.$(OBJ) os2pm.dev: $(os2pm_) $(SETDEV) os2pm $(os2pm_) os2dll_=gdevpm.$(OBJ) gdevpccm.$(OBJ) os2dll.dev: $(os2dll_) $(SETDEV) os2dll $(os2dll_) gdevpm.$(OBJ): gdevpm.c $(string__h)\ $(gp_h) $(gpcheck_h)\ $(gsdll_h) $(gserrors_h) $(gsexit_h) $(gsparam_h)\ $(gx_h) $(gxdevice_h) $(gxdevmem_h)\ $(gdevpccm_h) gdevpm.h ### --------------------------- The OS/2 printer ------------------------ ### os2prn_=gdevos2p.$(OBJ) os2prn.dev: $(os2prn_) page.dev $(SETPDEV) os2prn $(os2prn_) os2prn.$(OBJ): os2prn.c $(gp_h) ### -------------- The AT&T 3b1 Unixpc monochrome display --------------- ### ### Note: this driver was contributed by a user: please contact ### ### Andy Fyfe (andy@cs.caltech.edu) if you have questions. ### att3b1_=gdev3b1.$(OBJ) att3b1.dev: $(att3b1_) $(SETDEV) att3b1 $(att3b1_) gdev3b1.$(OBJ): gdev3b1.c $(GDEV) ### ---------------------- Linux PC with vgalib ------------------------- ### ### Note: these drivers were contributed by users. ### ### For questions about the lvga256 driver, please contact ### ### Ludger Kunz (ludger.kunz@fernuni-hagen.de). ### ### For questions about the vgalib driver, please contact ### ### Erik Talvola (talvola@gnu.ai.mit.edu). ### lvga256_=gdevl256.$(OBJ) lvga256.dev: $(lvga256_) $(SETDEV) lvga256 $(lvga256_) $(ADDMOD) lvga256 -lib vga vgagl gdevl256.$(OBJ): gdevl256.c $(GDEV) vgalib_=gdevvglb.$(OBJ) gdevpccm.$(OBJ) vgalib.dev: $(vgalib_) $(SETDEV) vgalib $(vgalib_) $(ADDMOD) vgalib -lib vga gdevvglb.$(OBJ): gdevvglb.c $(GDEV) $(gdevpccm_h) $(gsparam_h) ### ------------------- Sony NeWS frame buffer device ------------------ ### ### Note: this driver was contributed by a user: please contact ### ### Mike Smolenski (mike@intertech.com) if you have questions. ### # This is implemented as a 'printer' device. sonyfb_=gdevsnfb.$(OBJ) sonyfb.dev: $(sonyfb_) page.dev $(SETPDEV) sonyfb $(sonyfb_) gdevsnfb.$(OBJ): gdevsnfb.c $(PDEVH) ### ------------------------ The SunView device ------------------------ ### ### Note: this driver is maintained by a user: if you have questions, ### ### please contact Andreas Stolcke (stolcke@icsi.berkeley.edu). ### sunview_=gdevsun.$(OBJ) sunview.dev: $(sunview_) $(SETDEV) sunview $(sunview_) $(ADDMOD) sunview -lib suntool sunwindow pixrect gdevsun.$(OBJ): gdevsun.c $(GDEV) $(malloc__h)\ $(gscdefs_h) $(gserrors_h) $(gsmatrix_h) ### -------------------------- The X11 device -------------------------- ### # Aladdin Enterprises does not support Ghostview. For more information # about Ghostview, please contact Tim Theisen (ghostview@cs.wisc.edu). # See the main makefile for the definition of XLIBS. x11_=gdevx.$(OBJ) gdevxini.$(OBJ) gdevxxf.$(OBJ) gdevemap.$(OBJ) x11.dev: $(x11_) $(SETDEV) x11 $(x11_) $(ADDMOD) x11 -lib $(XLIBS) # See the main makefile for the definition of XINCLUDE. GDEVX=$(GDEV) x_.h gdevx.h $(MAKEFILE) gdevx.$(OBJ): gdevx.c $(GDEVX) $(math__h) $(memory__h) $(gsparam_h) $(CCC) $(XINCLUDE) gdevx.c gdevxini.$(OBJ): gdevxini.c $(GDEVX) $(math__h) $(memory__h) $(gserrors_h) $(CCC) $(XINCLUDE) gdevxini.c gdevxxf.$(OBJ): gdevxxf.c $(GDEVX) $(math__h) $(memory__h)\ $(gsstruct_h) $(gsutil_h) $(gxxfont_h) $(CCC) $(XINCLUDE) gdevxxf.c # Alternate X11-based devices to help debug other drivers. # x11alpha pretends to have 4 bits of alpha channel. # x11cmyk pretends to be a CMYK device with 1 bit each of C,M,Y,K. # x11gray2 pretends to be a 2-bit gray-scale device. # x11mono pretends to be a black-and-white device. x11alt_=$(x11_) gdevxalt.$(OBJ) x11alpha.dev: $(x11alt_) $(SETDEV) x11alpha $(x11alt_) $(ADDMOD) x11alpha -lib $(XLIBS) x11cmyk.dev: $(x11alt_) $(SETDEV) x11cmyk $(x11alt_) $(ADDMOD) x11cmyk -lib $(XLIBS) x11gray2.dev: $(x11alt_) $(SETDEV) x11gray2 $(x11alt_) $(ADDMOD) x11gray2 -lib $(XLIBS) x11mono.dev: $(x11alt_) $(SETDEV) x11mono $(x11alt_) $(ADDMOD) x11mono -lib $(XLIBS) gdevxalt.$(OBJ): gdevxalt.c $(GDEVX) $(math__h) $(memory__h) $(gsparam_h) $(CCC) $(XINCLUDE) gdevxalt.c ### ------------------------- DEC sixel displays ------------------------ ### ### Note: this driver was contributed by a user: please contact ### ### Phil Keegstra (keegstra@tonga.gsfc.nasa.gov) if you have questions. ### # This is a "printer" device, but it probably shouldn't be. # I don't know why the implementor chose to do it this way. sxlcrt_=gdevln03.$(OBJ) sxlcrt.dev: $(sxlcrt_) page.dev $(SETPDEV) sxlcrt $(sxlcrt_) ###### --------------- Memory-buffered printer devices --------------- ###### ### --------------------- The Apple printer devices --------------------- ### ### Note: these drivers were contributed by users. ### ### If you have questions about the DMP driver, please contact ### ### Mark Wedel (master@cats.ucsc.edu). ### ### If you have questions about the Imagewriter drivers, please contact ### ### Jonathan Luckey (luckey@rtfm.mlb.fl.us). ### ### If you have questions about the Imagewriter LQ driver, please ### ### contact Scott Barker (barkers@cuug.ab.ca). ### appledmp_=gdevadmp.$(OBJ) gdevadmp.$(OBJ): gdevadmp.c $(PDEVH) appledmp.dev: $(appledmp_) page.dev $(SETPDEV) appledmp $(appledmp_) iwhi.dev: $(appledmp_) page.dev $(SETPDEV) iwhi $(appledmp_) iwlo.dev: $(appledmp_) page.dev $(SETPDEV) iwlo $(appledmp_) iwlq.dev: $(appledmp_) page.dev $(SETPDEV) iwlq $(appledmp_) ### ------------ The Canon BubbleJet BJ10e and BJ200 devices ------------ ### bj10e_=gdevbj10.$(OBJ) bj10e.dev: $(bj10e_) page.dev $(SETPDEV) bj10e $(bj10e_) bj200.dev: $(bj10e_) page.dev $(SETPDEV) bj200 $(bj10e_) gdevbj10.$(OBJ): gdevbj10.c $(PDEVH) ### ------------- The CalComp Raster Format ----------------------------- ### ### Note: this driver was contributed by a user: please contact ### ### Ernst Muellner (ernst.muellner@oenzl.siemens.de) if you have ### ### questions. ### ccr_=gdevccr.$(OBJ) ccr.dev: $(ccr_) page.dev $(SETPDEV) ccr $(ccr_) gdevccr.$(OBJ): gdevccr.c $(PDEVH) ### ----------- The H-P DeskJet and LaserJet printer devices ----------- ### ### These are essentially the same device. ### NOTE: printing at full resolution (300 DPI) requires a printer ### with at least 1.5 Mb of memory. 150 DPI only requires .5 Mb. ### Note that the lj4dith driver is included with the H-P color printer ### drivers below. HPPCL=gdevpcl.$(OBJ) HPMONO=gdevdjet.$(OBJ) $(HPPCL) gdevpcl.$(OBJ): gdevpcl.c $(PDEVH) $(gdevpcl_h) gdevdjet.$(OBJ): gdevdjet.c $(PDEVH) $(gdevpcl_h) deskjet.dev: $(HPMONO) page.dev $(SETPDEV) deskjet $(HPMONO) djet500.dev: $(HPMONO) page.dev $(SETPDEV) djet500 $(HPMONO) laserjet.dev: $(HPMONO) page.dev $(SETPDEV) laserjet $(HPMONO) ljetplus.dev: $(HPMONO) page.dev $(SETPDEV) ljetplus $(HPMONO) ### Selecting ljet2p provides TIFF (mode 2) compression on LaserJet III, ### IIIp, IIId, IIIsi, IId, and IIp. ljet2p.dev: $(HPMONO) page.dev $(SETPDEV) ljet2p $(HPMONO) ### Selecting ljet3 provides Delta Row (mode 3) compression on LaserJet III, ### IIIp, IIId, IIIsi. ljet3.dev: $(HPMONO) page.dev $(SETPDEV) ljet3 $(HPMONO) ### Selecting ljet3d also provides duplex printing capability. ljet3d.dev: $(HPMONO) page.dev $(SETPDEV) ljet3d $(HPMONO) ### Selecting ljet4 also provides Delta Row compression on LaserJet IV series. ljet4.dev: $(HPMONO) page.dev $(SETPDEV) ljet4 $(HPMONO) lp2563.dev: $(HPMONO) page.dev $(SETPDEV) lp2563 $(HPMONO) oce9050.dev: $(HPMONO) page.dev $(SETPDEV) oce9050 $(HPMONO) ### ------------------ The H-P LaserJet 5 and 6 devices ----------------- ### ### These drivers use H-P's new PCL XL printer language, like H-P's ### LaserJet 5 Enhanced driver for MS Windows. We don't recommend using ### them: ### - If you have a LJ 5L or 5P, which isn't a "real" LaserJet 5, ### use the ljet4 driver instead. (The lj5 drivers won't work.) ### - If you have any other model of LJ 5 or 6, use the pxlmono ### driver, which often produces much more compact output. gdevpxat_h=gdevpxat.h gdevpxen_h=gdevpxen.h gdevpxop_h=gdevpxop.h ljet5_=gdevlj56.$(OBJ) $(HPPCL) lj5mono.dev: $(ljet5_) page.dev $(SETPDEV) lj5mono $(ljet5_) lj5gray.dev: $(ljet5_) page.dev $(SETPDEV) lj5gray $(ljet5_) gdevlj56.$(OBJ): gdevlj56.c $(PDEVH) $(gdevpcl_h)\ $(gdevpxat_h) $(gdevpxen_h) $(gdevpxop_h) ### The H-P DeskJet, PaintJet, and DesignJet family color printer devices.### ### Note: there are two different 500C drivers, both contributed by users.### ### If you have questions about the djet500c driver, ### ### please contact AKayser@et.tudelft.nl. ### ### If you have questions about the cdj* drivers, ### ### please contact g.cameron@biomed.abdn.ac.uk. ### ### If you have questions about the dnj560c driver, ### ### please contact koert@zen.cais.com. ### ### If you have questions about the lj4dith driver, ### ### please contact Eckhard.Rueggeberg@ts.go.dlr.de. ### ### If you have questions about the BJC600/BJC4000, BJC800, or ESCP ### ### drivers, please contact Yves.Arrouye@imag.fr. ### cdeskjet_=gdevcdj.$(OBJ) $(HPPCL) cdeskjet.dev: $(cdeskjet_) page.dev $(SETPDEV) cdeskjet $(cdeskjet_) cdjcolor.dev: $(cdeskjet_) page.dev $(SETPDEV) cdjcolor $(cdeskjet_) cdjmono.dev: $(cdeskjet_) page.dev $(SETPDEV) cdjmono $(cdeskjet_) cdj500.dev: $(cdeskjet_) page.dev $(SETPDEV) cdj500 $(cdeskjet_) cdj550.dev: $(cdeskjet_) page.dev $(SETPDEV) cdj550 $(cdeskjet_) declj250.dev: $(cdeskjet_) page.dev $(SETPDEV) declj250 $(cdeskjet_) dnj650c.dev: $(cdeskjet_) page.dev $(SETPDEV) dnj650c $(cdeskjet_) lj4dith.dev: $(cdeskjet_) page.dev $(SETPDEV) lj4dith $(cdeskjet_) pj.dev: $(cdeskjet_) page.dev $(SETPDEV) pj $(cdeskjet_) pjxl.dev: $(cdeskjet_) page.dev $(SETPDEV) pjxl $(cdeskjet_) pjxl300.dev: $(cdeskjet_) page.dev $(SETPDEV) pjxl300 $(cdeskjet_) # Note: the BJC600 driver also works for the BJC4000. bjc600.dev: $(cdeskjet_) page.dev $(SETPDEV) bjc600 $(cdeskjet_) bjc800.dev: $(cdeskjet_) page.dev $(SETPDEV) bjc800 $(cdeskjet_) escp.dev: $(cdeskjet_) page.dev $(SETPDEV) escp $(cdeskjet_) # NB: you can also customise the build if required, using # -DBitsPerPixel= if you wish the default to be other than 24 # for the generic drivers (cdj500, cdj550, pjxl300, pjtest, pjxltest). gdevcdj.$(OBJ): gdevcdj.c $(std_h) $(PDEVH) gdevbjc.h\ $(gsparam_h) $(gsstate_h) $(gxlum_h)\ $(gdevpcl_h) djet500c_=gdevdjtc.$(OBJ) $(HPPCL) djet500c.dev: $(djet500c_) page.dev $(SETPDEV) djet500c $(djet500c_) gdevdjtc.$(OBJ): gdevdjtc.c $(PDEVH) $(malloc__h) $(gdevpcl_h) ### -------------------- The Mitsubishi CP50 printer -------------------- ### ### Note: this driver was contributed by a user: please contact ### ### Michael Hu (michael@ximage.com) if you have questions. ### cp50_=gdevcp50.$(OBJ) cp50.dev: $(cp50_) page.dev $(SETPDEV) cp50 $(cp50_) gdevcp50.$(OBJ): gdevcp50.c $(PDEVH) ### ----------------- The generic Epson printer device ----------------- ### ### Note: most of this code was contributed by users. Please contact ### ### the following people if you have questions: ### ### eps9mid - Guenther Thomsen (thomsen@cs.tu-berlin.de) ### ### eps9high - David Wexelblat (dwex@mtgzfs3.att.com) ### ### ibmpro - James W. Birdsall (jwbirdsa@picarefy.picarefy.com) ### epson_=gdevepsn.$(OBJ) epson.dev: $(epson_) page.dev $(SETPDEV) epson $(epson_) eps9mid.dev: $(epson_) page.dev $(SETPDEV) eps9mid $(epson_) eps9high.dev: $(epson_) page.dev $(SETPDEV) eps9high $(epson_) gdevepsn.$(OBJ): gdevepsn.c $(PDEVH) ### ----------------- The IBM Proprinter printer device ---------------- ### ibmpro.dev: $(epson_) page.dev $(SETPDEV) ibmpro $(epson_) ### -------------- The Epson LQ-2550 color printer device -------------- ### ### Note: this driver was contributed by users: please contact ### ### Dave St. Clair (dave@exlog.com) if you have questions. ### epsonc_=gdevepsc.$(OBJ) epsonc.dev: $(epsonc_) page.dev $(SETPDEV) epsonc $(epsonc_) gdevepsc.$(OBJ): gdevepsc.c $(PDEVH) ### ------------- The Epson ESC/P 2 language printer devices ------------- ### ### Note: these drivers were contributed by users. ### ### For questions about the Stylus 800 and AP3250 drivers, please contact ### ### Richard Brown (rab@tauon.ph.unimelb.edu.au). ### ### For questions about the Stylus Color drivers, please contact ### ### Gunther Hess (gunther@elmos.de). ### ESCP2=gdevescp.$(OBJ) gdevescp.$(OBJ): gdevescp.c $(PDEVH) ap3250.dev: $(ESCP2) page.dev $(SETPDEV) ap3250 $(ESCP2) st800.dev: $(ESCP2) page.dev $(SETPDEV) st800 $(ESCP2) stcolor1_=gdevstc.$(OBJ) gdevstc1.$(OBJ) gdevstc2.$(OBJ) stcolor2_=gdevstc3.$(OBJ) gdevstc4.$(OBJ) stcolor.dev: $(stcolor1_) $(stcolor2_) page.dev $(SETPDEV) stcolor $(stcolor1_) $(ADDMOD) stcolor -obj $(stcolor2_) gdevstc.$(OBJ): gdevstc.c gdevstc.h $(PDEVH) gdevstc1.$(OBJ): gdevstc1.c gdevstc.h $(PDEVH) gdevstc2.$(OBJ): gdevstc2.c gdevstc.h $(PDEVH) gdevstc3.$(OBJ): gdevstc3.c gdevstc.h $(PDEVH) gdevstc4.$(OBJ): gdevstc4.c gdevstc.h $(PDEVH) ### --------------- Ugly/Update -> Unified Printer Driver ---------------- ### ### For questions about this driver, please contact: ### ### Gunther Hess (gunther@elmos.de) ### uniprint_=gdevupd.$(OBJ) uniprint.dev: $(uniprint_) page.dev $(SETPDEV) uniprint $(uniprint_) gdevupd.$(OBJ): gdevupd.c $(PDEVH) $(gsparam_h) ### -------------- cdj850 - HP 850c Driver under development ------------- ### ### Since this driver is in the development-phase it is not distributed ### ### with ghostscript, but it is available via anonymous ftp from: ### ### ftp://bonk.ethz.ch ### ### For questions about this driver, please contact: ### ### Uli Wortmann (E-Mail address inside the driver-package) ### cdeskjet8_=gdevcd8.$(OBJ) $(HPPCL) cdj850.dev: $(cdeskjet8_) page.dev $(SETPDEV) cdj850 $(cdeskjet8_) ### ------------ The H-P PaintJet color printer device ----------------- ### ### Note: this driver also supports the DEC LJ250 color printer, which ### ### has a PaintJet-compatible mode, and the PaintJet XL. ### ### If you have questions about the XL, please contact Rob Reiss ### ### (rob@moray.berkeley.edu). ### PJET=gdevpjet.$(OBJ) $(HPPCL) gdevpjet.$(OBJ): gdevpjet.c $(PDEVH) $(gdevpcl_h) lj250.dev: $(PJET) page.dev $(SETPDEV) lj250 $(PJET) paintjet.dev: $(PJET) page.dev $(SETPDEV) paintjet $(PJET) pjetxl.dev: $(PJET) page.dev $(SETPDEV) pjetxl $(PJET) ### -------------- Imagen ImPress Laser Printer device ----------------- ### ### Note: this driver was contributed by a user: please contact ### ### Alan Millar (AMillar@bolis.sf-bay.org) if you have questions. ### ### Set USE_BYTE_STREAM if using parallel interface; ### ### Don't set it if using 'ipr' spooler (default). ### ### You may also add -DA4 if needed for A4 paper. ### imagen_=gdevimgn.$(OBJ) imagen.dev: $(imagen_) page.dev $(SETPDEV) imagen $(imagen_) gdevimgn.$(OBJ): gdevimgn.c $(PDEVH) $(CCC) gdevimgn.c # for ipr spooler # $(CCC) -DUSE_BYTE_STREAM gdevimgn.c # for parallel ### ------- The IBM 3852 JetPrinter color inkjet printer device -------- ### ### Note: this driver was contributed by users: please contact ### ### Kevin Gift (kgift@draper.com) if you have questions. ### ### Note that the paper size that can be addressed by the graphics mode ### ### used in this driver is fixed at 7-1/2 inches wide (the printable ### ### width of the jetprinter itself.) ### jetp3852_=gdev3852.$(OBJ) jetp3852.dev: $(jetp3852_) page.dev $(SETPDEV) jetp3852 $(jetp3852_) gdev3852.$(OBJ): gdev3852.c $(PDEVH) $(gdevpcl_h) ### ---------- The Canon LBP-8II and LIPS III printer devices ---------- ### ### Note: these drivers were contributed by users. ### ### For questions about these drivers, please contact ### ### Lauri Paatero, lauri.paatero@paatero.pp.fi ### lbp8_=gdevlbp8.$(OBJ) lbp8.dev: $(lbp8_) page.dev $(SETPDEV) lbp8 $(lbp8_) lips3.dev: $(lbp8_) page.dev $(SETPDEV) lips3 $(lbp8_) gdevlbp8.$(OBJ): gdevlbp8.c $(PDEVH) ### ----------- The DEC LN03/LA50/LA70/LA75 printer devices ------------ ### ### Note: this driver was contributed by users: please contact ### ### Ulrich Mueller (ulm@vsnhd1.cern.ch) if you have questions. ### ### For questions about LA50 and LA75, please contact ### ### Ian MacPhedran (macphed@dvinci.USask.CA). ### ### For questions about the LA70, please contact ### ### Bruce Lowekamp (lowekamp@csugrad.cs.vt.edu). ### ### For questions about the LA75plus, please contact ### ### Andre' Beck (Andre_Beck@IRS.Inf.TU-Dresden.de). ### ln03_=gdevln03.$(OBJ) ln03.dev: $(ln03_) page.dev $(SETPDEV) ln03 $(ln03_) la50.dev: $(ln03_) page.dev $(SETPDEV) la50 $(ln03_) la70.dev: $(ln03_) page.dev $(SETPDEV) la70 $(ln03_) la75.dev: $(ln03_) page.dev $(SETPDEV) la75 $(ln03_) la75plus.dev: $(ln03_) page.dev $(SETPDEV) la75plus $(ln03_) gdevln03.$(OBJ): gdevln03.c $(PDEVH) # LA70 driver with low-resolution text enhancement. la70t_=gdevla7t.$(OBJ) la70t.dev: $(la70t_) page.dev $(SETPDEV) la70t $(la70t_) gdevla7t.$(OBJ): gdevla7t.c $(PDEVH) ### -------------- The Epson LP-8000 laser printer device -------------- ### ### Note: this driver was contributed by a user: please contact Oleg ### ### Oleg Fat'yanov if you have questions.### lp8000_=gdevlp8k.$(OBJ) lp8000.dev: $(lp8000_) page.dev $(SETPDEV) lp8000 $(lp8000_) gdevlp8k.$(OBJ): gdevlp8k.c $(PDEVH) ### -------------- The C.Itoh M8510 printer device --------------------- ### ### Note: this driver was contributed by a user: please contact Bob ### ### Smith if you have questions. ### m8510_=gdev8510.$(OBJ) m8510.dev: $(m8510_) page.dev $(SETPDEV) m8510 $(m8510_) gdev8510.$(OBJ): gdev8510.c $(PDEVH) ### -------------- 24pin Dot-matrix printer with 360DPI ---------------- ### ### Note: this driver was contributed by users. Please contact: ### ### Andreas Schwab (schwab@ls5.informatik.uni-dortmund.de) for ### ### questions about the NEC P6; ### ### Christian Felsch (felsch@tu-harburg.d400.de) for ### ### questions about the Epson LQ850. ### dm24_=gdevdm24.$(OBJ) gdevdm24.$(OBJ): gdevdm24.c $(PDEVH) necp6.dev: $(dm24_) page.dev $(SETPDEV) necp6 $(dm24_) lq850.dev: $(dm24_) page.dev $(SETPDEV) lq850 $(dm24_) ### ----------------- The Okidata MicroLine 182 device ----------------- ### ### Note: this driver was contributed by a user: please contact ### ### Maarten Koning (smeg@bnr.ca) if you have questions. ### oki182_=gdevo182.$(OBJ) oki182.dev: $(oki182_) page.dev $(SETPDEV) oki182 $(oki182_) gdevo182.$(OBJ): gdevo182.c $(PDEVH) ### ------------- The Okidata IBM compatible printer device ------------ ### ### Note: this driver was contributed by a user: please contact ### ### Charles Mack (chasm@netcom.com) if you have questions. ### okiibm_=gdevokii.$(OBJ) okiibm.dev: $(okiibm_) page.dev $(SETPDEV) okiibm $(okiibm_) gdevokii.$(OBJ): gdevokii.c $(PDEVH) ### ------------- The Ricoh 4081 laser printer device ------------------ ### ### Note: this driver was contributed by users: ### ### please contact kdw@oasis.icl.co.uk if you have questions. ### r4081_=gdev4081.$(OBJ) r4081.dev: $(r4081_) page.dev $(SETPDEV) r4081 $(r4081_) gdev4081.$(OBJ): gdev4081.c $(PDEVH) ### -------------------- Sony NWP533 printer device -------------------- ### ### Note: this driver was contributed by a user: please contact Tero ### ### Kivinen (kivinen@joker.cs.hut.fi) if you have questions. ### nwp533_=gdevn533.$(OBJ) nwp533.dev: $(nwp533_) page.dev $(SETPDEV) nwp533 $(nwp533_) gdevn533.$(OBJ): gdevn533.c $(PDEVH) ### ------------------------- The SPARCprinter ------------------------- ### ### Note: this driver was contributed by users: please contact Martin ### ### Schulte (schulte@thp.uni-koeln.de) if you have questions. ### ### He would also like to hear from anyone using the driver. ### ### Please consult the source code for additional documentation. ### sparc_=gdevsppr.$(OBJ) sparc.dev: $(sparc_) page.dev $(SETPDEV) sparc $(sparc_) gdevsppr.$(OBJ): gdevsppr.c $(PDEVH) ### ----------------- The StarJet SJ48 device -------------------------- ### ### Note: this driver was contributed by a user: if you have questions, ### ### . ### ### please contact Mats Akerblom (f86ma@dd.chalmers.se). ### sj48_=gdevsj48.$(OBJ) sj48.dev: $(sj48_) page.dev $(SETPDEV) sj48 $(sj48_) gdevsj48.$(OBJ): gdevsj48.c $(PDEVH) ### ----------------- Tektronix 4396d color printer -------------------- ### ### Note: this driver was contributed by a user: please contact ### ### Karl Hakimian (hakimian@haney.eecs.wsu.edu) ### ### if you have questions. ### t4693d_=gdev4693.$(OBJ) t4693d2.dev: $(t4693d_) page.dev $(SETPDEV) t4693d2 $(t4693d_) t4693d4.dev: $(t4693d_) page.dev $(SETPDEV) t4693d4 $(t4693d_) t4693d8.dev: $(t4693d_) page.dev $(SETPDEV) t4693d8 $(t4693d_) gdev4693.$(OBJ): gdev4693.c $(PDEVH) ### -------------------- Tektronix ink-jet printers -------------------- ### ### Note: this driver was contributed by a user: please contact ### ### Karsten Spang (spang@nbivax.nbi.dk) if you have questions. ### tek4696_=gdevtknk.$(OBJ) tek4696.dev: $(tek4696_) page.dev $(SETPDEV) tek4696 $(tek4696_) gdevtknk.$(OBJ): gdevtknk.c $(PDEVH) $(malloc__h) ### ----------------- The Xerox XES printer device --------------------- ### ### Note: this driver was contributed by users: please contact ### ### Peter Flass (flass@lbdrscs.bitnet) if you have questions. ### xes_=gdevxes.$(OBJ) xes.dev: $(xes_) page.dev $(SETPDEV) xes $(xes_) gdevxes.$(OBJ): gdevxes.c $(PDEVH) ###### ------------------------- Fax devices ------------------------- ###### ### --------------- Generic PostScript system compatible fax ------------ ### # This code doesn't work yet. Don't even think about using it. PSFAX=gdevpfax.$(OBJ) psfax_=$(PSFAX) psfax.dev: $(psfax_) page.dev $(SETPDEV) psfax $(psfax_) $(ADDMOD) psfax -iodev Fax gdevpfax.$(OBJ): gdevpfax.c $(PDEVH) $(gsparam_h) $(gxiodev_h) ### ------------------------- The DigiFAX device ------------------------ ### ### This driver outputs images in a format suitable for use with ### ### DigiBoard, Inc.'s DigiFAX software. Use -sDEVICE=dfaxhigh for ### ### high resolution output, -sDEVICE=dfaxlow for normal output. ### ### Note: this driver was contributed by a user: please contact ### ### Rick Richardson (rick@digibd.com) if you have questions. ### dfax_=gdevdfax.$(OBJ) gdevtfax.$(OBJ) dfaxlow.dev: $(dfax_) page.dev $(SETPDEV) dfaxlow $(dfax_) $(ADDMOD) dfaxlow -include cfe dfaxhigh.dev: $(dfax_) page.dev $(SETPDEV) dfaxhigh $(dfax_) $(ADDMOD) dfaxhigh -include cfe gdevdfax.$(OBJ): gdevdfax.c $(PDEVH) $(scfx_h) $(strimpl_h) ### --------------See under TIFF below for fax-format TIFF -------------- ### ###### ------------------- High-level file formats ------------------- ###### # Support for PostScript and PDF gdevpsdf_h=gdevpsdf.h $(gdevvec_h) $(strimpl_h) gdevpstr_h=gdevpstr.h gdevpsdf.$(OBJ): gdevpsdf.c $(stdio__h) $(string__h)\ $(gserror_h) $(gserrors_h) $(gsmemory_h) $(gsparam_h) $(gstypes_h)\ $(gxdevice_h)\ $(scfx_h) $(slzwx_h) $(srlx_h) $(strimpl_h)\ $(gdevpsdf_h) $(gdevpstr_h) gdevpstr.$(OBJ): gdevpstr.c $(math__h) $(stdio__h) $(string__h)\ $(gdevpstr_h) $(stream_h) # PostScript and EPS writers pswrite1_=gdevps.$(OBJ) gdevpsdf.$(OBJ) gdevpstr.$(OBJ) pswrite2_=scantab.$(OBJ) sfilter2.$(OBJ) pswrite_=$(pswrite1_) $(pswrite2_) epswrite.dev: $(ECHOGS_XE) $(pswrite_) vector.dev $(SETDEV) epswrite $(pswrite1_) $(ADDMOD) epswrite $(pswrite2_) $(ADDMOD) epswrite -include vector pswrite.dev: $(ECHOGS_XE) $(pswrite_) vector.dev $(SETDEV) pswrite $(pswrite1_) $(ADDMOD) pswrite $(pswrite2_) $(ADDMOD) pswrite -include vector gdevps.$(OBJ): gdevps.c $(GDEV) $(math__h) $(time__h)\ $(gscdefs_h) $(gscspace_h) $(gsparam_h) $(gsiparam_h) $(gsmatrix_h)\ $(gxdcolor_h)\ $(sa85x_h) $(strimpl_h)\ $(gdevpsdf_h) $(gdevpstr_h) # PDF writer # Note that gs_pdfwr.ps will only actually be loaded if the configuration # includes a PostScript interpreter. pdfwrite1_=gdevpdf.$(OBJ) gdevpdfd.$(OBJ) gdevpdfi.$(OBJ) gdevpdfm.$(OBJ) pdfwrite2_=gdevpdfp.$(OBJ) gdevpdft.$(OBJ) gdevpsdf.$(OBJ) gdevpstr.$(OBJ) pdfwrite3_=gsflip.$(OBJ) scantab.$(OBJ) sfilter2.$(OBJ) sstring.$(OBJ) pdfwrite_=$(pdfwrite1_) $(pdfwrite2_) $(pdfwrite3_) pdfwrite.dev: $(ECHOGS_XE) $(pdfwrite_) \ cmyklib.dev cfe.dev dcte.dev lzwe.dev rle.dev vector.dev $(SETDEV) pdfwrite $(pdfwrite1_) $(ADDMOD) pdfwrite $(pdfwrite2_) $(ADDMOD) pdfwrite $(pdfwrite3_) $(ADDMOD) pdfwrite -ps gs_pdfwr $(ADDMOD) pdfwrite -include cmyklib cfe dcte lzwe rle vector gdevpdfx_h=gdevpdfx.h $(gsparam_h) $(gxdevice_h) $(gxline_h) $(stream_h)\ $(gdevpsdf_h) $(gdevpstr_h) gdevpdf.$(OBJ): gdevpdf.c $(math__h) $(memory__h) $(string__h) $(time__h)\ $(gp_h)\ $(gdevpdfx_h) $(gscdefs_h) $(gserrors_h)\ $(gx_h) $(gxdevice_h) $(gxfixed_h) $(gxistate_h) $(gxpaint_h)\ $(gzcpath_h) $(gzpath_h)\ $(scanchar_h) $(scfx_h) $(slzwx_h) $(sstring_h) $(strimpl_h) $(szlibx_h) $(CCCZ) gdevpdf.c gdevpdfd.$(OBJ): gdevpdfd.c $(math__h)\ $(gdevpdfx_h)\ $(gx_h) $(gxdevice_h) $(gxfixed_h) $(gxistate_h) $(gxpaint_h)\ $(gzcpath_h) $(gzpath_h) gdevpdfi.$(OBJ): gdevpdfi.c $(math__h) $(memory__h) $(gx_h) \ $(gdevpdfx_h) $(gscie_h) $(gscolor2_h) $(gserrors_h) $(gsflip_h)\ $(gxcspace_h) $(gxistate_h) \ $(sa85x_h) $(scfx_h) $(srlx_h) $(strimpl_h) gdevpdfm.$(OBJ): gdevpdfm.c $(memory__h) $(string__h) $(gx_h) \ $(gdevpdfx_h) $(gserrors_h) $(gsutil_h) $(scanchar_h) gdevpdfp.$(OBJ): gdevpdfp.c $(gx_h)\ $(gdevpdfx_h) $(gserrors_h) gdevpdft.$(OBJ): gdevpdft.c $(math__h) $(memory__h) $(string__h) $(gx_h)\ $(gdevpdfx_h) $(gserrors_h) $(gsutil_h)\ $(scommon_h) # High-level PCL XL writer pxl_=gdevpx.$(OBJ) pxlmono.dev: $(pxl_) $(GDEV) vector.dev $(SETDEV) pxlmono $(pxl_) $(ADDMOD) pxlmono -include vector pxlcolor.dev: $(pxl_) $(GDEV) vector.dev $(SETDEV) pxlcolor $(pxl_) $(ADDMOD) pxlcolor -include vector gdevpx.$(OBJ): gdevpx.c $(math__h) $(memory__h) $(string__h)\ $(gx_h) $(gsccolor_h) $(gsdcolor_h) $(gserrors_h)\ $(gxcspace_h) $(gxdevice_h) $(gxpath_h)\ $(gdevpxat_h) $(gdevpxen_h) $(gdevpxop_h) $(gdevvec_h)\ $(srlx_h) $(strimpl_h) ###### --------------------- Raster file formats --------------------- ###### ### --------------------- The "plain bits" devices ---------------------- ### bit_=gdevbit.$(OBJ) bit.dev: $(bit_) page.dev $(SETPDEV) bit $(bit_) bitrgb.dev: $(bit_) page.dev $(SETPDEV) bitrgb $(bit_) bitcmyk.dev: $(bit_) page.dev $(SETPDEV) bitcmyk $(bit_) gdevbit.$(OBJ): gdevbit.c $(PDEVH) $(gsparam_h) $(gxlum_h) ### ------------------------- .BMP file formats ------------------------- ### bmp_=gdevbmp.$(OBJ) gdevpccm.$(OBJ) gdevbmp.$(OBJ): gdevbmp.c $(PDEVH) $(gdevpccm_h) bmpmono.dev: $(bmp_) page.dev $(SETPDEV) bmpmono $(bmp_) bmp16.dev: $(bmp_) page.dev $(SETPDEV) bmp16 $(bmp_) bmp256.dev: $(bmp_) page.dev $(SETPDEV) bmp256 $(bmp_) bmp16m.dev: $(bmp_) page.dev $(SETPDEV) bmp16m $(bmp_) ### -------------------------- CGM file format ------------------------- ### ### This driver is under development. Use at your own risk. ### ### The output is very low-level, consisting only of rectangles and ### ### cell arrays. ### cgm_=gdevcgm.$(OBJ) gdevcgml.$(OBJ) gdevcgml_h=gdevcgml.h gdevcgmx_h=gdevcgmx.h $(gdevcgml_h) gdevcgm.$(OBJ): gdevcgm.c $(GDEV) $(memory__h)\ $(gsparam_h) $(gdevpccm_h) $(gdevcgml_h) gdevcgml.$(OBJ): gdevcgml.c $(memory__h) $(stdio__h)\ $(gdevcgmx_h) cgmmono.dev: $(cgm_) $(SETDEV) cgmmono $(cgm_) cgm8.dev: $(cgm_) $(SETDEV) cgm8 $(cgm_) cgm24.dev: $(cgm_) $(SETDEV) cgm24 $(cgm_) ### -------------------- The CIF file format for VLSI ------------------ ### ### Note: this driver was contributed by a user: please contact ### ### Frederic Petrot (petrot@masi.ibp.fr) if you have questions. ### cif_=gdevcif.$(OBJ) cif.dev: $(cif_) page.dev $(SETPDEV) cif $(cif_) gdevcif.$(OBJ): gdevcif.c $(PDEVH) ### ------------------------- JPEG file format ------------------------- ### jpeg_=gdevjpeg.$(OBJ) # RGB output jpeg.dev: $(jpeg_) sdcte.dev page.dev $(SETPDEV) jpeg $(jpeg_) $(ADDMOD) jpeg -include sdcte # Gray output jpeggray.dev: $(jpeg_) sdcte.dev page.dev $(SETPDEV) jpeggray $(jpeg_) $(ADDMOD) jpeggray -include sdcte gdevjpeg.$(OBJ): gdevjpeg.c $(stdio__h) $(PDEVH)\ $(sdct_h) $(sjpeg_h) $(stream_h) $(strimpl_h) jpeglib.h ### ------------------------- MIFF file format ------------------------- ### ### Right now we support only 24-bit direct color, but we might add more ### ### formats in the future. ### miff_=gdevmiff.$(OBJ) miff24.dev: $(miff_) page.dev $(SETPDEV) miff24 $(miff_) gdevmiff.$(OBJ): gdevmiff.c $(PDEVH) ### --------------------------- MGR devices ---------------------------- ### ### Note: these drivers were contributed by a user: please contact ### ### Carsten Emde (carsten@ce.pr.net.ch) if you have questions. ### MGR=gdevmgr.$(OBJ) gdevpccm.$(OBJ) gdevmgr.$(OBJ): gdevmgr.c $(PDEVH) $(gdevpccm_h) gdevmgr.h mgrmono.dev: $(MGR) page.dev $(SETPDEV) mgrmono $(MGR) mgrgray2.dev: $(MGR) page.dev $(SETPDEV) mgrgray2 $(MGR) mgrgray4.dev: $(MGR) page.dev $(SETPDEV) mgrgray4 $(MGR) mgrgray8.dev: $(MGR) page.dev $(SETPDEV) mgrgray8 $(MGR) mgr4.dev: $(MGR) page.dev $(SETPDEV) mgr4 $(MGR) mgr8.dev: $(MGR) page.dev $(SETPDEV) mgr8 $(MGR) ### ------------------------- PCX file formats ------------------------- ### pcx_=gdevpcx.$(OBJ) gdevpccm.$(OBJ) gdevpcx.$(OBJ): gdevpcx.c $(PDEVH) $(gdevpccm_h) $(gxlum_h) pcxmono.dev: $(pcx_) page.dev $(SETPDEV) pcxmono $(pcx_) pcxgray.dev: $(pcx_) page.dev $(SETPDEV) pcxgray $(pcx_) pcx16.dev: $(pcx_) page.dev $(SETPDEV) pcx16 $(pcx_) pcx256.dev: $(pcx_) page.dev $(SETPDEV) pcx256 $(pcx_) pcx24b.dev: $(pcx_) page.dev $(SETPDEV) pcx24b $(pcx_) pcxcmyk.dev: $(pcx_) page.dev $(SETPDEV) pcxcmyk $(pcx_) # The 2-up PCX device is here only as an example, and for testing. pcx2up.dev: $(LIB_MAK) $(ECHOGS_XE) gdevp2up.$(OBJ) page.dev pcx256.dev $(SETPDEV) pcx2up gdevp2up.$(OBJ) $(ADDMOD) pcx2up -include pcx256 gdevp2up.$(OBJ): gdevp2up.c $(AK)\ $(gdevpccm_h) $(gdevprn_h) $(gxclpage_h) ### ------------------- Portable Bitmap file formats ------------------- ### ### For more information, see the pbm(5), pgm(5), and ppm(5) man pages. ### pxm_=gdevpbm.$(OBJ) gdevpbm.$(OBJ): gdevpbm.c $(PDEVH) $(gscdefs_h) $(gxlum_h) ### Portable Bitmap (PBM, plain or raw format, magic numbers "P1" or "P4") pbm.dev: $(pxm_) page.dev $(SETPDEV) pbm $(pxm_) pbmraw.dev: $(pxm_) page.dev $(SETPDEV) pbmraw $(pxm_) ### Portable Graymap (PGM, plain or raw format, magic numbers "P2" or "P5") pgm.dev: $(pxm_) page.dev $(SETPDEV) pgm $(pxm_) pgmraw.dev: $(pxm_) page.dev $(SETPDEV) pgmraw $(pxm_) # PGM with automatic optimization to PBM if this is possible. pgnm.dev: $(pxm_) page.dev $(SETPDEV) pgnm $(pxm_) pgnmraw.dev: $(pxm_) page.dev $(SETPDEV) pgnmraw $(pxm_) ### Portable Pixmap (PPM, plain or raw format, magic numbers "P3" or "P6") ppm.dev: $(pxm_) page.dev $(SETPDEV) ppm $(pxm_) ppmraw.dev: $(pxm_) page.dev $(SETPDEV) ppmraw $(pxm_) # PPM with automatic optimization to PGM or PBM if possible. pnm.dev: $(pxm_) page.dev $(SETPDEV) pnm $(pxm_) pnmraw.dev: $(pxm_) page.dev $(SETPDEV) pnmraw $(pxm_) ### Portable inKmap (CMYK internally, converted to PPM=RGB at output time) pkm.dev: $(pxm_) page.dev $(SETPDEV) pkm $(pxm_) pkmraw.dev: $(pxm_) page.dev $(SETPDEV) pkmraw $(pxm_) ### --------------- Portable Network Graphics file format --------------- ### ### Requires libpng 0.81 and zlib 0.95 (or more recent versions). ### ### See libpng.mak and zlib.mak for more details. ### png_=gdevpng.$(OBJ) gdevpccm.$(OBJ) gdevpng.$(OBJ): gdevpng.c $(gdevprn_h) $(gdevpccm_h) $(gscdefs_h) $(PSRC)png.h $(CCCP) gdevpng.c pngmono.dev: libpng.dev $(png_) page.dev $(SETPDEV) pngmono $(png_) $(ADDMOD) pngmono -include libpng pnggray.dev: libpng.dev $(png_) page.dev $(SETPDEV) pnggray $(png_) $(ADDMOD) pnggray -include libpng png16.dev: libpng.dev $(png_) page.dev $(SETPDEV) png16 $(png_) $(ADDMOD) png16 -include libpng png256.dev: libpng.dev $(png_) page.dev $(SETPDEV) png256 $(png_) $(ADDMOD) png256 -include libpng png16m.dev: libpng.dev $(png_) page.dev $(SETPDEV) png16m $(png_) $(ADDMOD) png16m -include libpng ### ---------------------- PostScript image format ---------------------- ### ### These devices make it possible to print Level 2 files on a Level 1 ### ### printer, by converting them to a bitmap in PostScript format. ### ps_=gdevpsim.$(OBJ) gdevpsim.$(OBJ): gdevpsim.c $(PDEVH) psmono.dev: $(ps_) page.dev $(SETPDEV) psmono $(ps_) psgray.dev: $(ps_) page.dev $(SETPDEV) psgray $(ps_) # Someday there will be RGB and CMYK variants.... ### -------------------------- SGI RGB pixmaps -------------------------- ### sgirgb_=gdevsgi.$(OBJ) gdevsgi.$(OBJ): gdevsgi.c $(PDEVH) gdevsgi.h sgirgb.dev: $(sgirgb_) page.dev $(SETPDEV) sgirgb $(sgirgb_) ### -------------------- Plain or TIFF fax encoding --------------------- ### ### Use -sDEVICE=tiffg3 or tiffg4 and ### ### -r204x98 for low resolution output, or ### ### -r204x196 for high resolution output ### ### These drivers recognize 3 page sizes: letter, A4, and B4. ### gdevtifs_h=gdevtifs.h tfax_=gdevtfax.$(OBJ) tfax.dev: $(tfax_) cfe.dev lzwe.dev rle.dev tiffs.dev $(SETMOD) tfax $(tfax_) $(ADDMOD) tfax -include cfe lzwe rle tiffs gdevtfax.$(OBJ): gdevtfax.c $(PDEVH)\ $(gdevtifs_h) $(scfx_h) $(slzwx_h) $(srlx_h) $(strimpl_h) ### Plain G3/G4 fax with no header faxg3.dev: tfax.dev $(SETDEV) faxg3 -include tfax faxg32d.dev: tfax.dev $(SETDEV) faxg32d -include tfax faxg4.dev: tfax.dev $(SETDEV) faxg4 -include tfax ### ---------------------------- TIFF formats --------------------------- ### tiffs_=gdevtifs.$(OBJ) tiffs.dev: $(tiffs_) page.dev $(SETMOD) tiffs $(tiffs_) $(ADDMOD) tiffs -include page gdevtifs.$(OBJ): gdevtifs.c $(PDEVH) $(stdio__h) $(time__h) \ $(gdevtifs_h) $(gscdefs_h) $(gstypes_h) # Black & white, G3/G4 fax tiffcrle.dev: tfax.dev $(SETDEV) tiffcrle -include tfax tiffg3.dev: tfax.dev $(SETDEV) tiffg3 -include tfax tiffg32d.dev: tfax.dev $(SETDEV) tiffg32d -include tfax tiffg4.dev: tfax.dev $(SETDEV) tiffg4 -include tfax # Black & white, LZW compression tifflzw.dev: tfax.dev $(SETDEV) tifflzw -include tfax # Black & white, PackBits compression tiffpack.dev: tfax.dev $(SETDEV) tiffpack -include tfax # RGB, no compression tiffrgb_=gdevtfnx.$(OBJ) tiff12nc.dev: $(tiffrgb_) tiffs.dev $(SETPDEV) tiff12nc $(tiffrgb_) $(ADDMOD) tiff12nc -include tiffs tiff24nc.dev: $(tiffrgb_) tiffs.dev $(SETPDEV) tiff24nc $(tiffrgb_) $(ADDMOD) tiff24nc -include tiffs gdevtfnx.$(OBJ): gdevtfnx.c $(PDEVH) $(gdevtifs_h)