Copyright (C) 1995, 1996 Aladdin Enterprises. All rights reserved. This file is part of Aladdin Ghostscript. Aladdin Ghostscript is distributed with NO WARRANTY OF ANY KIND. No author or distributor accepts any responsibility for the consequences of using it, or for whether it serves any particular purpose or works at all, unless he or she says so in writing. Refer to the Aladdin Ghostscript Free Public License (the "License") for full details. Every copy of Aladdin Ghostscript must include a copy of the License, normally in a plain ASCII text file named PUBLIC. The License grants you the right to copy, modify and redistribute Aladdin Ghostscript, but only under certain conditions described in the License. Among other things, the License requires that the copyright notice and this notice be preserved on all copies. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - This file, install.txt, describes how to install the Ghostscript language interpreter. For an overview of Ghostscript and a list of the documentation files, see README. ******** ******** How to install Ghostscript ******** ******** There are 3 separate items that you must have available in order to be able to run Ghostscript: (1) The Ghostscript executable file(s) -- on some operating systems, more than one file is required. These are entirely platform-specific. See below for details. (2) Initialization files that Ghostscript reads in when it starts up. These are the same on all platforms. (3) Fonts, for rendering text. These are platform-independent, but if you already have fonts of the right kind on your platform, you may be able to use them. See below for details. See the companion document fonts.txt for more information about fonts. The initialization files (2) are the same on all platforms: - gs_*.ps (see psfiles.txt for the full list), unless Ghostscript was compiled using the "compiled initialization files" option. - pdf_*.ps, if Ghostscript was compiled with the ability to interpret PDF files (pdf.dev included in FEATURE_DEVS). - Fontmap, unless you plan to always invoke Ghostscript with the -dNOFONTMAP switch. See the search algorithm section of use.txt for a description of the search algorithm used to find these files. The per-platform descriptions that follow tell you where to install these files. MS-DOS ------ You need the following files to run Ghostscript: GS386.EXE DOS4GW.EXE You should install all the files except the fonts in C:\GS, and the fonts in C:\GS\FONTS. If you have Adobe Type Manager fonts installed on your system, and you wish to use them with Ghostscript, you may wish to replace the FONTMAP file with FONTMAP.ATM, and to add to the environment variable GS_LIB the name of the directory where the fonts are located (see below for more information about GS_LIB). Before you do this, please read carefully the license that accompanies the ATM fonts; Aladdin Enterprises takes no responsibility for any possible violations of such licenses. Similarly, if you have Adobe Type Basics, you may wish to replace FONTMAP with FONTMAP.ATB. MS Windows ---------- Win32s or Windows 95 or Windows NT is required. You need the following files to run Ghostscript: GSWIN32.EXE GSWIN32C.EXE GSDLL32.DLL GS16SPL.EXE (Win32s only) You should install all the files except the fonts in C:\GS, and the fonts in C:\GS\FONTS. The GSview previewer contains an installation program to install and configure GSview and Ghostscript for Win32. Information on GSview is available from: http://www.cs.wisc.edu/~ghost/gsview/ See under "MS-DOS" above for information about using Adobe Type Manager fonts with Ghostscript. If your system uses TrueType fonts, you can get them converted to a Ghostscript-compatible format at the time you select your "printer" by doing the following: 1) Open control panel and double click on the printers icon. 2) Select your Postscript Printer. 3) Choose Setup. 4) Choose Options. 5) Choose Advanced. 6) At the top of the Dialog Box you will see TrueType Fonts Send to Printer As: Choose Adobe Type 1. 7) Uncheck Use Printer Fonts for All TrueType Fonts and Use Substitution Table. 8) OK. 9) OK etc. That's it! Your TrueType fonts will automatically be downloaded in your PostScript file for Ghostscript to use. For printer devices, the default output is: the default printer (Win95 or WinNT) OR prompt for a printer port (Win32s). This can be modified as follows. -sOutputFile="LPT1:" Output to named port. -sOutputFile="\\spool\printer name" (Win95 or WinNT only) Output to named printer. -sOutputFile="\\spool" (Win95 or WinNT only) Prompt for printer name. Local printers only are supported. For Win32s, make sure that gs16spl.exe is in the same directory as gswin32.exe. OS/2 2.x -------- The Ghostscript OS/2 implementation is designed for OS/2 2.1 or later. A few people have used it successfully under OS/2 2.0, but it has had very little testing. You need the following files to run Ghostscript: GSOS2.EXE - this is a text application that will run windowed or full screen. GSDLL2.DLL - this is a Dynamic Link Library that must be in the same directory as GSOS2.EXE or on the LIBPATH. GSPMDRV.EXE - this is an "external driver" used by the "os2pm" device, which is normally the default device and which displays output in a Presentation Manager window. GSPMDRV.EXE must be located in the same directory as GSOS2.EXE or on the PATH. GSOS2.EXE, GSDLL2.DLL and GSPMDRV.EXE are compiled using EMX/GCC 0.9b. You must have the EMX DLL's on your LIBPATH. These are available from ftp://hobbes.nmsu.edu/os2/unix/emx09b/emxrt.zip The system menu of the Ghostscript Image window includes a "Copy" command to copy the currently displayed bitmap to the Clipboard. OS/2 comes with some Adobe Type Manager fonts. If you wish to use these with Ghostscript, you should replace the FONTMAP file with FONTMAP.OS2, and add to the environment variable GS_LIB the name of the directory where the fonts are located, usually c:\psfonts. (see below for more information about GS_LIB). Before you do this, please read carefully the license that accompanies the ATM fonts; Aladdin Enterprises takes no responsibility for any possible violations of such licenses. Since GSOS2.EXE is not a PM application, it cannot determine the depth of the PM display. You must provide this information using the -dBitsPerPixel option. The default is 8 bits/pixel. Valid values are 1, 4, 8 & 24. For monochrome VGA use -dBitsPerPixel=1 For standard VGA screen use -dBitsPerPixel=4 For 256 colour SVGA use -dBitsPerPixel=8 A command file gspm.cmd containing the following line may be useful: @c:\gs\gsos2.exe -Ic:/gs;c:/gs/fonts;c:/psfonts -sDEVICE=os2pm -dBitsPerPixel=8 -sPAPERSIZE=a4 %1 %2 %3 %4 %5 %6 %7 %8 While drawing, the os2pm driver updates the display every 5 seconds. On slow computers this is undesirable and a different interval can be specified in milliseconds with the -dUpdateInterval option. The default is -dUpdateInterval=5000; to disable update use -dUpdateInterval=0. Standard VGA is very slow due to double buffering to avoid bugs and due to 1 plane to 4 plane conversion. Use a 256 color display driver by preference. Many display drivers have bugs which cause 1 bit/pixel bitmaps to be displayed incorrectly. GSOS2.EXE and GSPMDRV.EXE will stay in memory for the number of minutes specified in the environment variable GS_LOAD. If you run GS386 in the OS/2 2.0 or 2.1 DOS Box, you must select the "ENABLED" setting for the DPMI_DOS_API option of the DOS Box. GS386 will not run with the "AUTO" setting. For printer devices, output goes to the default queue. To print to a specified queue, use -sOutputFile=\\spool\NullLPT1 where NullLPT1 is the queue physical name. Unix ---- You need the following file to run Ghostscript: gs Installing Ghostscript on a Unix system requires compiling it first: please read the Unix section(s) in make.txt for more information, especially regarding how to decide which makefile to use and how you may need to edit it. After building, execute make install The makefile installs all the files, except the fonts, in /usr/local or various subdirectories thereof. The fonts should be installed in /usr/local/share/ghostscript/fonts. Consult the makefile for more details. VMS --- You need the following executable file to run Ghostscript: GS.EXE Installing Ghostscript on a VMS system requires compiling it first. You should install all the files, including the fonts, in the same directory as the executable and initialization files. By default, this is the directory in which you did the compilation. Consult the makefile (OPENVMS.MAK) for more details. If you have DECWindows/Motif installed, you may wish to replace the FONTMAP file with the file FONTMAP.VMS. Read the comment at the beginning of the latter file for more information.