    Returns  you  to  the TOS online screen, in direct connection with the    
    serial port.  You can also use the Alternate key for this.                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This is how you got here!  You can also hit the HELP key while you are    
    On Line to view a help screen about command keys used while online.       
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Displays  approximately how much free memory (RAM) is left in your ST.    
    May also be invoked with Alternate-R from the Online mode.                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Also  activated  by  holding the Control key and pressing the Clr Home    
    key  while  in  the Online modem.  This will drop the RS232 signal DTR    
    (pin 20) for about 3 seconds.                                             
                                                                          
    For  most smart modems properly configured and cabled, this will cause    
    the modem to hang up the telephone line.                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Toggles  the  ST's  Key Click signal on and off.  If it is on when you    
    select this, it will be turned off and vice versa.  The menu will show    
    a  check  mark  next  to 'Key Click' if it is on.  May also be toggled    
    from the Online mode by pressing Alternate-C.                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Displays  the  Baud  Rate selection screen from which you may select a    
    desired  baud rate.  You MUST select one of the choices and it will be    
    set as soon as you do.  You will remain at that speed until you either    
    select  a  new  baud  rate  or  select an Autodial entry.  May also be    
    called from the Online mode by pressing Alternate-B.                      
                                                                          
    (Also see Dial Number and Auto Baud Rate help).                           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Allows  you  to  change the RS232 port settings for Data Bits, Parity,    
    and  Stop Bits.  Most systems use 8/None/1, but some may require other    
    settings.   You  may  exit  from  this  selection  without  making any    
    changes.  Any changes made and set will remain in effect until changed    
    again, or until you exit VanTerm.  The default is always 8/None/1.        
                                                                          
    NOTES:  Often  other systems use 7/Even/1. To use PC-Pursuit to Upload    
    Files, set to 8/None/2.                                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Sets  VanTerm  for  Full  Duplex  communications.  This means the host    
    system  (BBS  etc)  will echo back each character you send to it.  May    
    also be set by pressing Alternate-F while in the Online mode.             
                                                                          
    Most BBS's and host systems use Full Duplex.  (See Half Duplex).          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Sets  VanTerm  for  Half  Duplex  communications.  This means the host    
    system  (BBS  etc)  does  NOT  echo back each character you send to it    
    therefore  VanTerm  will display each character you send.  May also be    
    set by pressing Alternate-H while in the Online mode.                     
                                                                          
    Very  few  host  systems  use  this.   GEnie is one that does use Half    
    Duplex by default, but even it can be changed to Full Duplex.             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Permits  you  change  the  ST date and time.  Once changed the ST will    
    maintain  the  new  time  and  date in both the system and IKBD clocks    
    until  you  change  it  again  or turn your ST power off.  May also be    
    called from the Online mode by pressing Alternate-T.                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Loads   and   executes   a  Script  (.SCR)  file.   See  the  seperate    
    documentation for the Script Processor.                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Chains  to  another  program.  This is the same as leaving VanTerm and    
    going back to the Desktop and then executing some other program.          
                                                                          
    Use the GEM file selector to find the desired program, execute it, and    
    optionally pass parameters to it (if needed - otherwise just press the    
    Return key.                                                               
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Suspends  VanTerm  and  executes another program (at your own risk!).     
    Use  the GEM file selector to find the desired program, select it, and    
    optionally  pass  parameters  to  it (if needed - otherwise just press    
    Return).   Once you exit the program you've selected, you'll return to    
    VanTerm.   May  also be called by pressing Alternate-E from the Online    
    mode.                                                                     
                                                                          
    For some reason this messes up the RS232 port so you'll need to select    
    the  Baud  Rate  option (unless you select an Autodial entry, in which    
    case the baud rate will be automatically set unless you have Auto Baud    
    Rate turned off.  See Auto Baud Rate help).                               
                                                                                                                                                                                                                                                                                                                                        Obviously  this  exits VanTerm and returns to the calling program, GEM    
    Desktop, COMMAND shell, or wherever VanTerm was executed.                 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  displays your Autodial directory and lets you select a number to    
    be  dialed for you.  Point and click on the appropriate entry to start    
    dialing.  Press the RIGHT mouse button to exit.                           
                                                                          
    You  can  initiate Chain Dialing (dialing a group of numbers until one    
    is  connected) by holding either SHIFT key while selecting.  Selecting    
    again  while  holding  SHIFT  will clear the Chain mark.  Click on any    
    "Chain"  marked item to initiate Chain Dialing or any unmarked item to    
    initiate single dial of that item (or repeat dial if that menu item is    
    checked).  Chain Dialing causes VanTerm to cycle through each selected    
    number  until  one is connected, upon which, that entry is cleared and    
    all  other  Chains  remain for another atempt.  Press ClrHome to clear    
    any and all selected Chains.                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Turns  Repeat  Dialing on or off.  If on a check mark will appear next    
    to this item.  When on and an Autodial entry is selected, VanTerm will    
    keep  dialing  the  number  every  few  seconds until it either gets a    
    CONNECT  message,  or until you press the UNDO key, upon which it will    
    stop  dialing.  If the modem returns BUSY, NO CARRIER, or NO DIALTONE,    
    VanTerm  will  retry  the  number.   This will only work if your modem    
    returns one of the messages described above.                              
                                                                          
    Once you are connected or you cancel Repeat Dialing with the UNDO key,    
    Repeat  Dial  will  be turned off.  If you wish to Repeat Dial another    
    number you must again select this item to turn it on.                     
                                                                                                                                                                                                                                                                                                                                        If  on  (check  mark displayed) VanTerm will reset the RS232 port baud    
    rate  according  to the Baud Rate entered into the Autodial entry.  If    
    it  is  off VanTerm will leave the baud rate alone even if an Autodial    
    entry  is  selected.   The  default is ON, and in most cases you would    
    want  it  on.   One  exception  is using VanTerm's Autodial entries to    
    communicate  with PC-Pursuit to dial various numbers once connected to    
    the network.                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  allows  you to keep a copy of everything that transpired    
    during  an  online  session by making a copy of it to a buffer storage    
    area  in  memory.   Can also be toggled open/close with the INSERT key    
    while online.                                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You  can  choose  not  to  record  your online session or to terminate    
    recording  at  any  time.  Default  is  with  the  Buffer closed. (Not    
    recording)   Can  also be toggled open/close with the INSERT key while    
    online.                                                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You may choose at any time to erase the contents of the buffer storage    
    area  containing  the recording you are making of you online session.     
    The  buffer  may  also  be  erased  from  the  Online mode by pressing    
    Alternate-Z.                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    With  this  option you may choose to load any text file from disk into    
    the buffer storage area.                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You can write the entire contents of the buffer storage area to a disk    
    file at any time with this option.                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You may make a printed copy of the contents of the buffer storage area    
    by  using  this  option.   In  order  to  support  as many printers as    
    possible, no page breaks are sent at this time.                           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use  this  option  to  page  through the buffer storage area to find a    
    message  you  wish  to  reply to or a listing of a program you wish to    
    download.   You  can also invoke this by pressing Alternate-D while in    
    the Online mode.                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    As  an  alternative to sending an ASCII file using another option, you    
    can  send  the  contents  of the buffer storage area, loading it first    
    with  a  file  from  disk,  or  you may have 'captured' an interesting    
    message you wish to pass on to another BBS.                               
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  menu  button  gives  you  the  option of setting the size of the    
    buffer  storage  to  any size consistent with the amount of memory you    
    have  available.  The  size  is  computed in the number of lines (0 to    
    32766 characters each!) that you wish to set aside.                       
                                                                          
    NOTE: A common size is 1000-2000 lines.                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Function  keys  may  be  used  to send any string of characters, up to    
    32766  characters  long.   Take care to follow the instructions on the    
    edit  page  and  use  <shift-2> instead of commas and '&' for carriage    
    returns.   This might be used to send a long string of instructions to    
    a  BBS, instructions that you do not wish to retype each time you need    
    them.   To  totally  erase a function key, simply press the Delete key    
    until  all  characters are removed.  Totally empty keys will display a    
    message  that  they  are  empty  and will be ignored if you press them    
    while online.                                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Vanterm  includes an Autodialer which will connect to your modem, call    
    the  number  you  wish, as many times as you want, make connection for    
    you,  and  send whatever Name and Password you wish to the computer on    
    the  other  end  of  the connection.  However, the information must be    
    entered into the dialer configuration file first.  Select a prefix and    
    suffix  to be sent to the Modem consistent with YOUR modem by pressing    
    <insert>.   When  this is done, select an entry to edit and follow the    
    instructions.  Then be sure to save the new configuration!                
                                                                          
    NOTE: Most problems with Vanterm can be traced directly to using codes    
    which  do  not  work with YOUR modem.  It may be necessary to read the    
    documentation  which  came  with  your  modem  to find the right codes    
    (examples are included which work with Hayes-compatible modems).          
                                                                                                                                                                        Vanterm  allows  you to keep as many different Dialer and Function key    
    configuration  files  on  disk  as  you like and load them as needed.     
    These  are files that end in '.CFG' and you may name them anything you    
    like.  For instance, you might have one .CFG file for local BBS's, one    
    file for PC-Pursuit and one file for business use.                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    After editing your configuration file, you'll need to save it for your    
    next use.  You will also be asked if you want your directory sorted by    
    the  Name  field.   If  you  answer  yes,  they will most certainly be    
    rearranged alphabetically!  So, if you have a 'special' layout in your    
    directory,  you  may  not  want  to  sort  it!   Sorting is completely    
    optional.                                                                 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  will 'pretty print' the currently loaded configuration.     
    It  is useful for creating hard copies of your configuration files, so    
    they  may be reconstructed in event something happens to your disk, or    
    in  case  you accidentally delete one!  This function replaces the old    
    VTCFGPRT.PRG utility program.                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  will give you a blank '.CFG' file to edit, name and save    
    for  later use.  If you've never used VanTerm before, and/or therefore    
    have  no  configuration file to be loaded, VanTerm will initialize all    
    function  keys and Dial Directory entries automatically, and display a    
    warning.  You can now edit them and save a configuration.  If you HAVE    
    already  loaded a configuration and you select this, the function keys    
    and  dial directory will be totally cleared! You default path settings    
    and buffer size will remain intact, however.                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  will change the colors on a Medium Resolution Monitor to    
    what  we  find is a more pleasing combination of colors.  Selecting it    
    again  will  change  the  colors  back.   This  will  also reverse the    
    Black/White orientation on a Monochrome monitor.                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You  may  want  the  XModem Transfer Utility (WXYTR.TTP), the Archiver    
    Utility  (ARC.TTP),  any downloaded files, and any files for uploading    
    to  reside  on  various disks and/or folders.  This Menu Button allows    
    you  to  tell  Vanterm  where  to  find  the  utilities  and files for    
    uploading and where to send any Downloaded files.                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option allows you to upload (sent to a remote Computer) any ASCII    
    (text)  file  in  normal ASCII mode.  Make sure the receiving Computer    
    knows that you are sending the file in this mode.                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  is an intelligent XModem send facility provided by the excellent    
    WXYTR  utility.   It  will  send  the  file  in XModem/CRC mode if the    
    receiving  Computer supports that mode and sends XModem/checksum if it    
    does not.  This sends the normal 128 byte packet.                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  option  is the same as XModem/CRC except the Packet size is 1024    
    bytes  (1K).   On  the receiving end, BBS's sometimes call this option    
    Ymodem,  but  that  is  incorrect!   This  is  XModem-1K!   YModem  is    
    XModem-1K with Batch (multiple file transfer) ability.                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This   Menu  Button  receives  a  file  sent  to  you  in  XModem/CRC,    
    XModem/checksum  or  XModem-1K.   It can sense the mode of the sending    
    unit and adjust to those parameters.                                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option prepares a batch of files for YModem (Batch) SEND and MUST    
    be  executed  before the SEND option is permitted.  Simply select each    
    file  you  desire to send in Batch mode by either double clicking each    
    file,  or clicking once on each file to highlight it, then clicking on    
    OK  or  pressing  the  RETURN  key.  Select OK or press Return WITHOUT    
    selecting  a  file  will  save  the  selected  filenames  and exit the    
    function.   Selecting  CANCEL  will abort the procedure without saving    
    any filenames.                                                            
                                                                          
    This  function  may  be  executed  from  the  online  mode by pressing    
    Alternate-U.                                                              
                                                                                                                                                                                                                                                                                                                                        This  option  instructs  VanTerm  to SEND all selected files in YModem    
    (Batch)  mode!   At this writing, few BBS's support this, so make sure    
    the  one you're on does!.  And though VanTerm may be the only terminal    
    program (at of this writing) to support this feature, you can at least    
    send groups of files to other VanTerm owners!                             
                                                                          
    In  order to select this function, you must have first selected YModem    
    (Batch) SETUP and selected at least 1 file for Batch transfer.  If you    
    have  not  done  this, you'll get an alert telling you so.  Otherwise,    
    this  function  will  display all files selected and their statistics,    
    give  you  a  last  chance  to  send  or  abort,  prompt  you  for the    
    CRC/Checksum mode, and begin the transfer.                                
                                                                          
    This  function  may  be  executed  from  the  online  mode by pressing    
    Alternate-G.                                                              
            This  Option  allows  Vanterm  to receive files sent in Ymodem (batch)    
    mode.   The sending BBS must support this mode of file transfer and be    
    ready to send before you select it.                                       
                                                                          
    NOTE:  Do  not  try  to  name the files that are being sent to you, as    
    Vanterm  will  automatically  get the names during file transfer.  All    
    you need to select is the FOLDER to receive the files.  If the default    
    folder is acceptable, just click on OK to start.                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This Menu Button allows direct access to the Archive Utility (ARC.TTP)    
    to view the contents of an Archived (.ARC) file.                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Archived  files  are not usable unless they are extracted and expanded    
    to  their  normal  size.   This  Menu  Button  allows direct access to    
    ARC.TTP to extract these files.                                           
                                                                          
    NOTE: Use Arc View to see how large a file will be when expanded, then    
    use  Disk  Free to be sure you have enough room for the expanded files    
    before using Extract!                                                     
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This  Menu  Button  allows  you  to build your own Archived Library of    
    compressed files for Uploading.                                           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  Menu  Button allows you to test your Archived files (either ones    
    you  built  yourself  or  ones  you  downloaded)  to see that they are    
    correctly  compacted  and  that the internal directories (headers) are    
    correct.                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Used  to  update  an existing ARC file with files of the same names as    
    those  already  in  the  ARC file, but of a later size or date.  First    
    select the ARC file, then select the file or mask to update.              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Used  to  remove  a  file  by name or mask from an existing ARC file.     
    Select  the  ARC  file,  then type the filename or mask to remove from    
    that ARC file.                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  button,  when selected, will allow you to set the DEFAULT disk.     
    That  is  the disk Vanterm will use for most of the other DISK options    
    unless  you  have  set up various disks and/or folders for specialized    
    uses using the PATH options.  Click on [Exit] or hit the Return key to    
    exit this function.                                                       
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You  may  select  a  drive and view the amount of unused space that is    
    left  on  that  drive.   Click on [Exit] or hit the Return key to exit    
    this function.                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  Menu button will show you a directory of the DEFAULT drive.  You    
    may  see  a directory of another drive by typing the drive and path in    
    the  top  line,  then clicking on the shaded bar at the top of the GEM    
    directory window.                                                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This Menu Button allows you to make a new folder on the DEFAULT drive.    
    You may change the disk/path to make the folder on using the SET DRIVE    
    Menu Button or by typing the drive and path on the top line of the GEM    
    box  then  clicking  on the shaded bar at the top of the GEM directory    
    window.                                                                   
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This  Menu button allows you to delete any Folder and ALL files within    
    that folder, so be CAREFUL!!!.  (See Make Folder)                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    With this option you may page through any ASCII (text) file on disk.      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Select  any  file  you  wish to delete.  Repeat to delete more files.     
    Select  CANCEL  when  finished.  Entering '*.*' will delete ALL files,    
    just  as entering '*.TXT" will delete all files ending in .TXT, and so    
    on according to standard TOS filemask conventions, so be CAREFUL!!!       
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You may choose to change the name of any file with this option.           
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Simply  follow  the instructions to copy any file from any disk to any    
    other.  You  may  change the name of the file while copying by using a    
    new name for the destination file.                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                