M3425 DIP SWITCH SETTINGS



In order to set your 3425 drive to oprate as drive C: or as D:
You need to locate the 8 pin dip switch located on the back of
the PCB. The proper settings ars as follows...

1) DRIVE C: PINS 1-4 ON, 5,6, AND 7 OFF, AND 8 ON 

2) DRIVE D: PINS 1-4 ON 5 AND 6 OFF, 7 ON , AND 8 OFF

NOTE: IF YOU ARE USING A TWISTED CABLE THEN YOU NEED TO SET YOUR 
DRIVE UP AS D: (SEE ST506 CABLING)