                                                                               
                  OS/2 2.1 CD-ROM DRIVE COMPATIBILITY LIST                     
                  ----------------------------------------                     
                                                                               
  Note:  In addition to any device drivers listed under the column "Drivers"   
         in the table below, all CD-ROM drives require the OS2CDROM.DMD        
         device driver.                                                        
                                                                               
                                                                               
 ----------------------------------------------------------------------------- 
 | Manufacturer | Model      | Interface | Drivers      | Available   | Notes| 
 |--------------|------------|-----------|--------------|-------------|------| 
 | BSR          | 6800MX     | Mitsumi   | MITFX001.ADD | OS/2 2.1 SP | 1    | 
 |---------------------------------------------------------------------------| 
 | CD Technology| T3301      | SCSI-2    |              | OS/2 2.1    |      |
 |              | T3401      | SCSI-2    |              | OS/2 2.1    | 3    |
 |---------------------------------------------------------------------------|
 | Chinon       | 431        | SCSI-1    | CHINCDS1.FLT | OS/2 2.1 SP | 4    |
 |              | 435        | SCSI-1    | CHINCDS1.FLT | OS/2 2.1 SP | 4    |
 |              | 535        | SCSI-1    | CHINCDS1.FLT | OS/2 2.1 SP | 4    |
 |---------------------------------------------------------------------------|
 | Creative Labs| OmniCD     | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    |
 |---------------------------------------------------------------------------|
 | Hitachi      | CDR-1650S  | SCSI-1    | HITCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-1700S  | Hitachi   | HITCDISA.ADD | Hitachi     | 5    |
 |              | CDR-1900S  | Hitachi   | HITCDISA.ADD | Hitachi     | 5    |
 |              | CDR-1950S  | SCSI-2    |              | OS/2 2.1    | 3    |
 |              | CDR-1750S  | SCSI-1    | HITCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-3600   | Hitachi   | HITCDISA.ADD | Hitachi     | 5    |
 |              | CDR-3650   | SCSI-1    | HITCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-3700   | Hitachi   | HITCDISA.ADD | Hitachi     | 5    |
 |              | CDR-6700   | Hitachi   | HITCDISA.ADD | Hitachi     | 5    |
 |              | CDR-3750   | SCSI-2    |              | OS/2 2.1    |      |
 |              | CDR-6750   | SCSI-2    |              | OS/2 2.1    | 3    |
 |---------------------------------------------------------------------------|
 | IBM          | CD-ROM I   | SCSI-1    | TOSHCDS1.FLT | OS/2 2.1    |      |
 |              | CD-ROM II  | SCSI-2    |              | OS/2 2.1    |      |
 |              | Enhanced II| SCSI-2    |              | OS/2 2.1    | 3    |
 |              | ISA CD-ROM | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    |
 |---------------------------------------------------------------------------|
 | Mitsumi      | CRMC-LU002 | Mitsumi   | MITFX001.ADD | OS/2 2.1 SP | 1    |
 |              | CRMC-LU005 | Mitsumi   |              | OS/2 2.1 SP | 1    |
 |              | CRMC-FX001 | Mitsumi   |              | OS/2 2.1 SP | 1    |
 |              | CRMC-FX001D| Mitsumi   |              | OS/2 2.1 SP | 1    |
 |---------------------------------------------------------------------------|
 | NEC          | CDR-25     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-36     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-37     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-38     | SCSI-2    |              | OS/2 2.1    |      |
 |              | CDR-72     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-73     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      |
 |              | CDR-73     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      | 
 |              | CDR-74     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      | 
 |              | CDR-74-1   | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CDR-82     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      | 
 |              | CDR-83     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      | 
 |              | CDR-84     | SCSI-1    | NECCDS1.FLT  | OS/2 2.1    |      | 
 |              | CDR-84-1   | SCSI-2    |              | OS/2 2.1    |      | 
 |              | 3Xe        | SCSI-2    |              | OS/2 2.1    | 3    | 
 |              | 3Xi        | SCSI-2    |              | OS/2 2.1    | 3    | 
 |              | 3Xp        | SCSI-2    |              | OS/2 2.1    | 3    | 
 |---------------------------------------------------------------------------| 
 | Panasonic    | CR-501     | SCSI-2    |              | OS/2 2.1    |      | 
 |              | LK-MC501S  | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CR-521     | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    | 
 |              | CR-522     | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    | 
 |              | CR-523     | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    | 
 |              | CR-562     | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    | 
 |              | CR-563     | Panasonic | SBCD2.ADD    | OS/2 2.1 SP | 1    | 
 |---------------------------------------------------------------------------| 
 | Philips LMS  | CM206      | Philips   | LMS206.ADD   | 1Q 94       | 2    | 
 |              | CM226      | Philips   | LMS206.ADD   | 1Q 94       | 2    | 
 |              | CM215      | SCSI-2    |              | OS/2 2.1    | 3    | 
 |---------------------------------------------------------------------------| 
 | Pioneer      | DRM-600    | SCSI-1    |              | OS/2 2.1    |      | 
 |              | DRM-604X   | SCSI-2    |              | OS/2 2.1    |      | 
 |---------------------------------------------------------------------------| 
 | Sony         | CDU-31A    | Sony      | SONY31A.ADD  | OS/2 2.1 SP | 1    | 
 |              | CDU-531    | Sony      | SONY535.ADD  | 1Q 94       | 2    | 
 |              | CDU-535    | Sony      | SONY535.ADD  | 1Q 94       | 2    | 
 |              | CDU-541    | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CDU-561    | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CDU-6201   | Sony      | SONY535.ADD  | 1Q 94       | 2    | 
 |              | CDU-6205   | Sony      | SONY535.ADD  | 1Q 94       | 2    | 
 |              | CDU-6111   | SCSI-1    | SONYCDS1.FLT | OS/2 2.1    |      | 
 |              | CDU-6211   | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CDU-7201   | Sony      | SONY535.ADD  | 1Q 94       | 2    | 
 |              | CDU-7205   | Sony      | SONY535.ADD  | 1Q 94       | 2    | 
 |              | CDU-7211   | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CDU-7211   | SCSI-2    |              | OS/2 2.1    |      | 
 |              | CDU-7305   | Sony      | SONY31A.ADD  | OS/2 2.1 SP | 1    | 
 |              | CDU-7811   | SCSI-2    |              | OS/2 2.1    | 3    | 
 |---------------------------------------------------------------------------| 
 | Tandy        | CDR-1000   | Mitsumi   | MITFX001.ADD | OS/2 2.1 SP |      | 
 |---------------------------------------------------------------------------| 
 | Texel        | DM-3021    | SCSI-1    | SONYCDS1.FLT | OS/2 2.1    |      | 
 |              | DM-3024    | SCSI-2    |              | OS/2 2.1    |      | 
 |              | DM-3028    | SCSI-2    |              | OS/2 2.1    | 3    | 
 |              | DM-5021    | SCSI-1    | SONYCDS1.FLT | OS/2 2.1    |      | 
 |              | DM-5024    | SCSI-2    |              | OS/2 2.1    |      | 
 |              | DM-5028    | SCSI-2    |              | OS/2 2.1    | 3    | 
 |---------------------------------------------------------------------------| 
 | Toshiba      | XM-3201    | SCSI-1    | TOSHCDS1.FLT | OS/2 2.1    |      | 
 |              | XM-3301    | SCSI-2    |              | OS/2 2.1    |      | 
 |              | XM-3401    | SCSI-2    |              | OS/2 2.1    |      | 
 |              | XM-4101    | SCSI-2    |              | OS/2 2.1    | 3    | 
 ----------------------------------------------------------------------------- 
                                                                              
                                                                              
Notes:                                                                        
                                                                              
1. OS/2 2.1 SP (Service Pack) CD-ROM drivers are available from               
   OS/2 Club on Prodigy, OS2SUPPORT forum on CompuServe,  
   and other IBM BBS'es.              
                                                                              
      BBS Zip File | Driver                                                   
      -------------|-----------------------                                   
      MITFX.ZIP    | contains MITFX001.ADD                                    
      SBCD2.ZIP    | contains SBCD2.ADD                                       
      SONY31.ZIP   | contains SONY31A.ADD                                     
      CHINON.ZIP   | contains CHINCDS1.FLT                                    
                                                                              
                                                                              
2. Driver available via BBS in 1Q94                                           
                                                                              
3. The SCSI CD-ROM drive was announced after OS/2 2.1 shipped and has         
   subsequently been certified to work with OS/2 2.1.  The CD-ROM drive       
   model does not appear in the OS/2 2.1 Selective Install list, but is       
   supported with the existing device drivers which ship in OS/2 2.1.        
   The following table lists the new CD-ROM drive model along with the       
   entry which should be selected in the Selective Install list to install   
   the correct CD-ROM driver. (Note: The new entries have been added to      
   the Selective Install list in OS/2 2.1 Service Pack).                     
                                                                             
                                                                             
                                                                             
     Post 2.1 Certified SCSI CD-ROM  |   OS/2 2.1 Selective Install Choice   
     ---------------------------------------------------------------------   
     CD Technology T3401             |   CD Technology T3301                 
     Hitachi CDR-1950S, 6750         |   Hitachi CDR-3750                    
     IBM Enhanced CD-ROM II          |   IBM CD-ROM II                       
     NEC MultiSpin 3Xe,3Xi,3Xp       |   NEC MultiSpin 38,74,84              
     Philips LMS CM215               |   Other                               
     Sony CDU-7811                   |   Sony CDU-541,561,6211,7211          
     Texel DM-3028,5028              |   Texel DM-3024,5024                  
     Toshiba XM-4101                 |   Toshiba 3301,3401                   
                                                                             
                                                                             
                                                                             
4.  The Chinon CD-ROM drive must be attached to a SCSI adapter which         
    is supported in OS/2 with an OS/2 SCSI Adapter Device Driver (.ADD).     
    There is currently no support for the Chinon SCSI adapter which is       
    typically bundled with the drive.  Chinon is developing an OS/2          
    Adapter Device Driver for their SCSI card, but no date has been          
    committed.                                                               
                                                                             
                                                                             
5.  The Hitachi non-SCSI CD-ROM device drivers are available from            
    Hitachi.  IBM does not provide support for these drives.                 
                                                                             
                                                                             
============================================================================ 
                                                                             
NONSCSI CD-ROM DEVICE DRIVER PARAMETERS                                      
                                                                             
                                                                               
                                                                               
 Mitsumi CD-ROM Device Driver Parameters                                       
 ---------------------------------------                                       
                                                                               
 The parameters for the following CD-ROM adapter device drivers are            
 described in this section:                                                    
                                                                               
                                                                               
 MITFX001.ADD                                                                  
                                                                               
                                                                               
 This device driver supports the following CD-ROM drives:                      
                                                                               
 Mitsumi CRMC-FX001D                                                           
 Mitsumi CRMC-FX001                                                            
 Mitsumi CRMC-LU005S                                                           
 Mitsumi CRMC-LU002S                                                           
 BSR 6800                                                                      
 Tandy CDR-1000                                                                
                                                                               
 Parameter Definitions                                                         
 ---------------------                                                         
                                                                               
 /P:nnn        Specifies the base I/O port address of the interface card.      
               This must be the same number as specified on the interface      
               card.                                                           
                                                                               
                                                                               
 /I:nn         Specifies the interrupt request (IRQ) channel number.           
               This must match the IRQ value selected on the host              
               interface card.  If this parameter is not specified,            
               the device driver will use software polling transfer.           
                                                                               
                                                                               
 /V            Verbose. The device driver will display the device driver       
               revision level and CD-ROM product identification information    
               at boot time.                                                    
                                                                                
                                                                                
 Parameter Examples                                                             
 ------------------                                                             
                                                                                
 1.  Mitsumi CD-ROM drive attached to Mitsumi host adapter:                     
                                                                                
     If the Mitsumi host adapter is set to a base I/O port address              
     of 320, the line in config.sys should be:                                  
                                                                                
         BASEDEV=MITFX001.ADD  /P:320                                           
                                                                                
                                                                                
 2.  Mitsumi CD-ROM drive attached to Creative Labs Sound Blaster 16 MultiCD    
                                                                                
     For example, if the Mitsumi CD-ROM port on the Sound Blaster               
     16 MultiCD is set to I/O port address of 320, the line in                  
     config.sys should be:                                                      
                                                                                
                                                                                
         BASEDEV=MITFX001.ADD  /P:320                                           
                                                                                
                                                                                
 3.  To enable interrupt transfer mode, which improves performance,             
     the /I parameter must be specified.  For example to enable                 
     interrupt transfer mode for IRQ channel 10 at I/O port address             
     of 320h, the line in config.sys should appear as follows:                  
                                                                                
                                                                                
         BASEDEV=MITFX001.ADD  /P:320 /I:10                                     
                                                                                
                                                                                
 ===============================================================================
                                                                                
                                                                                
 Sony CD-ROM Device Driver Parameters                                           
                                                                                
 ---------------------------------------                                      
                                                                              
 The parameters for the following CD-ROM adapter device drivers are           
 described in this section:                                                   
                                                                              
                                                                              
 SONY31A.ADD                                                                  
                                                                              
                                                                              
 This device driver supports the following CD-ROM drives:                     
                                                                              
 Sony CDU-31A                                                                 
 Sony CDU-7305                                                                
                                                                              
                                                                              
 Parameter Definitions                                                        
 ---------------------                                                        
                                                                              
                                                                              
 /A:n          Identifies a specific adapter, n.  The adapter is specified    
               as a single digit value which is zero based.  (i.e. The first  
               adapter is specified as /A:0).                                 
                                                                              
                                                                              
 /AT:dd        Sets the adapter type connected to the CD-ROM drive.           
                                                                              
               Supported values are:                                          
                   00 = Sony CDB-334 (default)                                
                   08 = Media Vision ProAudio Spectrum-16                     
                                                                              
                                                                              
 /P:nnnn       Specifies the base I/O port address of the interface card.     
               This must be the same number as specified on the interface     
               card.                                                          
                                                                              
               If this parameter is not specified, the default port address   
               for the host adapter is used.  For the Sony CDB-334 host       
               adapter, the default is 0340.  For the Media Vision ProAudio    
               Spectrum-16 card the default is 1F88.                           
                                                                               
                                                                               
 /I:nn         Specifies the interrupt request (IRQ) channel number.           
               This must match the IRQ value selected on the host              
               interface card.  If this parameter is not specified,            
               the device driver will use software polling transfer.           
                                                                               
               Note: Some Sony host adapter cards did not ship with the        
               plastic jumper switch to select the IRQ channel on the IRQ      
               jumper block. You must obtain and install the plastic jumper    
               switch to enable the IRQ channel.                               
                                                                               
                                                                               
 /V            Verbose. The device driver will display the device driver       
               revision level and CD-ROM product identification information    
               at boot time.                                                   
                                                                               
                                                                               
 Parameter Examples                                                            
 ------------------                                                            
                                                                               
 1.  Sony CDU-31A CD-ROM drive attached to Sony CDB-334 host adapter:          
                                                                               
     The Sony CDB-334 host adapter supports base I/O port addresses of         
     320h, 330h, 340h or 360h. If the CDB-334 host adapter is set to any       
     port address other than the default of 340h, the config.sys statement     
     needs to be modified. For example, if the Sony CDB-334 host adapter is    
     set to a base I/O port address of 360, the line in config.sys should be:  
                                                                               
         BASEDEV=SONY31A.ADD /A:0 /P:0360                                      
                                                                               
                                                                               
 2.  Sony CDU-31A CD-ROM drive attached to Media Vision ProAudio               
     Spectrum-16 host adapter:                                                 
                                                                               
                                                                                
     The line in config.sys should appear as follows:                           
                                                                                
         BASEDEV=SONY31A.ADD /A:0 /AT:08                                        
                                                                                
                                                                                
 3. Sony CDU-31A CD-ROM drive attached to the Creative Labs Sound               
    Blaster Pro, Sound Blaster 16, or Sound Blaster 16 MultiCD                  
    host adapter:                                                               
                                                                                
    The port address specified on the BASEDEV statement in config.sys           
    should be 10h above the base I/O port address specified on the adapter      
    card.  For example, if the Sound Blaster card is set for a base             
    I/O port address of 220h, the line in config.sys should be:                 
                                                                                
         BASEDEV=SONY31A.ADD /A:0 /P:0230                                       
                                                                                
                                                                                
 4.  To enable interrupt transfer mode, which improves performance,             
     the /I parameter must be specified.  For example to enable                 
     interrupt transfer mode for IRQ channel 5 at I/O port address              
     of 360h, the line in config.sys should appear as follows:                  
                                                                                
                                                                                
         BASEDEV=SONY31A.ADD /A:0 /P:0360 /I:5                                  
                                                                                
                                                                                
                                                                                
 ===============================================================================
                                                                                
                                                                                
 Panasonic CD-ROM Device Driver Parameters                                      
 ---------------------------------------                                        
                                                                                
 The parameters for the following CD-ROM adapter device drivers are             
 described in this section:                                                     
                                                                                
                                                                                
                                                                                
                                                                                
 SBCD2.ADD                                                                      
                                                                                
                                                                                
 This device driver supports the following CD-ROM drives:                       
                                                                                
 Creative Labs OmniCD                                                           
 IBM ISA CD-ROM                                                                 
 Panasonic  521,522,523,562,563                                                 
                                                                                
                                                                                
 Parameter Definitions                                                          
 ---------------------                                                          
                                                                                
                                                                                
 /P:nnn        Specifies the base I/O port address of the interface card.       
               This must be the same number as specified on the interface       
               card.                                                            
                                                                                
 /T:x          Sets the adapter type connected to the CD-ROM drive.             
                                                                                
               Supported value is:                                              
                  2 = Creative Labs CD-ROM interface card (not Sound Blaster)   
                                                                                
                                                                                
                                                                                
 Parameter Examples                                                             
 ------------------                                                             
                                                                                
 1.  Panasonic, Creative Labs OmniCD or IBM ISA CD-ROM drive attached           
     to standard Panasonic or IBM ISA CD-ROM host adapter:                      
                                                                                
     The standard Panasonic or IBM ISA host adapter supports base I/O           
     port addresses of 300h, 310h, 320h or 330h.  For example, if the           
     adapter is set to a base I/O port address of 300, the line in              
     config.sys should be:                                                      
                                                                                
         BASEDEV=SBCD2.ADD /P:300                                               
                                                                                
                                                                             
 2.  Panasonic, Creative Labs OmniCD or IBM ISA CD-ROM drive attached        
     to Creative Labs Sound Blaster Pro, Sound Blaster 16, or Sound          
     Blaster 16 MultiCD.                                                     
                                                                             
     For example, if the Sound Blaster card is set for a base I/O            
     address of 220h, the line in config.sys should be:                      
                                                                             
         BASEDEV=SBCD2.ADD /P:220                                            
                                                                             
                                                                             
 3.  Creative Labs OmniCD attached to standard Creative Labs                 
     CD-ROM host adapter (not Sound Blaster) :                               
                                                                             
     The standard Creative Labs host adapter supports base I/O port          
     addresses of 250h or 260h.  For example, if the adapter is set          
     to a base I/O port address of 250, the line in config.sys should be:    
                                                                             
         BASEDEV=SBCD2.ADD /P:250 /T:2                                       
                                                                             
